Lepro WL4000 Solar Motion Sensor Wall Light Instruction Manual

1. Introduktion

Thank you for choosing the Lepro WL4000 Solar Motion Sensor Wall Light. This product is designed to provide efficient and reliable outdoor illumination using solar power. Featuring adjustable heads and a motion-activated sensor, it enhances security and convenience for various outdoor spaces.

2. Sikkerhedsoplysninger

• Læs alle instruktioner før installation og brug.
• Do not disassemble, repair, or modify the product. This may cause electric shock, fire, or damage.
• Sørg for, at solpanelet er udsat for direkte sollys for optimal opladning. Undgå skyggefulde områder.
• Hold produktet væk fra ild eller høje temperaturer.
• This product is IP65 waterproof, suitable for outdoor use, but do not immerse it in water.
• Bortskaf batterier i henhold til lokale bestemmelser. Må ikke brændes.

3. Pakkens indhold

Bekræft at alle komponenter er til stede i pakken:

• Solar Light (2 units)
• Wall Plug (4 units)
• Mounting Screws (4 units)
• Wall Bracket (2 units)
• Brugsanvisning (1 enhed)

Image: Contents of the product package, showing two solar lights, mounting hardware, and the user manual.

4. Produktet er slutview

4.1 Funktioner

• Solcelledrevet effektivitet: Charges during the day using sunlight for nighttime illumination.
• Justerbart 3-hoveds design: Three independently adjustable panels provide a wide 270° lighting angle.
• Bevægelsesaktiveret sensor: Automatically activates when motion is detected within a 16-26 feet range.
• IP65 vandtæt rating: Designet til at modstå forskellige udendørs vejrforhold.
• Fleksibel installation: Includes a 16-foot connecting cable for optimal solar panel placement.

4.2 Komponenter

Billede: Detaljeret view of the solar light components, including the solar panel, motion sensor, and three adjustable LED light heads with their dimensions.

• Solpanel: Converts sunlight into electrical energy to charge the internal battery.
• LED Light Heads (3): Provide bright illumination and can be adjusted to direct light.
• Bevægelsessensor: Detects movement to activate the lights automatically.
• Tænd/sluk-knap: Located on the unit for manual control.

5. Opsætning og installation

Follow these steps to properly set up and install your solar motion sensor wall light:

1. Vælg et installationssted: Select a location that receives direct sunlight for at least 6-8 hours daily to ensure optimal charging of the solar panel. The recommended installation height is 1.5-3.5 meters (5-12 feet).
2. Monter vægbeslaget: Use the provided mounting screws and wall plugs to securely fix the wall bracket to your desired surface.
3. Aktiver lyset: Locate the ON/OFF switch on the underside of the solar light unit. Slide the switch to the 'ON' position.
4. Attach the Solar Light: Carefully slide the solar light unit onto the fixed wall bracket until it clicks securely into place.
5. Juster lyshoveder: Adjust the three light heads and the solar panel to your preferred angles to maximize light coverage and solar exposure. The light heads offer a 270° wide lighting angle.

Image: Visual guide for installation, illustrating the steps of securing the bracket, activating the light, and attaching it to the wall.

6. Betjeningsvejledning

The Lepro WL4000 Solar Motion Sensor Wall Light operates automatically once installed and activated:

• Dagsdrift: The solar panel charges the internal lithium-ion battery during daylight hours. The light will remain off.
• Natdrift: At dusk, the light will enter standby mode. When motion is detected within its 16-26 feet range, the light will automatically turn on at full brightness.
• Auto-sluk funktion: The light will remain on as long as motion is detected. After approximately 20 seconds of no detected motion, the light will automatically turn off to conserve battery power.

Image: Visual representation of the light's operational cycle: charging in daylight, activating with motion at night, and automatically turning off.

7. Vedligeholdelse

To ensure the longevity and optimal performance of your solar light, follow these maintenance tips:

• Rengør solpanelet: Tør solpanelet regelmæssigt af med en blød, tør klud.amp klud til at fjerne støv, snavs eller affald. Et rent panel sikrer effektiv opladning.
• Undersøg for skader: Periodically check the light unit and wiring for any signs of damage. If damage is found, contact customer support.
• Ryd forhindringer: Ensure no new obstructions (e.g., growing branches, new structures) are blocking direct sunlight from reaching the solar panel.

8. Fejlfinding

If your solar light is not functioning as expected, refer to the following common issues and solutions:

9. Specifikationer

10. Garanti og support

For warranty information or technical support, please refer to the contact details provided with your purchase documentation or visit the official Lepro webwebstedet. Behold din købskvittering som købsbevis.