Sharp Digital Alarm med AccuSet - Automatisk Smart Clock Brugermanual

Indledning

This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.

Sharp Digital Alarm Clock, front view, showing red LED display with time 12:08.

Figur 1: Forside view of the Sharp Digital Alarm Clock.

Produktegenskaber

AccuSet Automatic Time Set: Pre-programmed time for hassle-free setup.
Quick Daylight Savings Time (DST) Adjustment: Simple switch for DST changes.
High/Low Dimmer Control: Justerbar skærmens lysstyrke.
Back-up batteri: Pre-installed CR2032 battery for time settings retention during power outages.
Valg af tidszone: Easily select your local time zone.

Diagram showing key features of the Sharp Digital Alarm Clock: Large 0.9 inch Red LED Display, AccuSet Automatic Time Setting, High & Low Display Dimmer Control, Easy Set Top Button Controls, and Installed Battery Backup.

Figure 2: Key features of the Sharp Digital Alarm Clock.

Opsætning

1. Initial Power-Up and Time Zone Selection

Locate the time zone switch on the bottom of the clock.
Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.

2. Daylight Savings Time (DST) Adjustment

Sådan justerer du for sommertid:

Slide the DST switch on the bottom of the clock to ON to add one hour (+1 hr).
For Standard Time, slide the switch to SLUKKET to subtract one hour (-1 hr).

3. Batteribackup

The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.

Betjeningsvejledning

Top view of the Sharp Digital Alarm Clock showing button labels: DIMMER HI/LO, TIME SET, ALARM SET, SNOOZE, HOUR SET, MINUTE SET, ALARM ON/OFF. Also indicates PM indicator and ALARM indicator on the display.

Figure 3: Top panel controls and display indicators.

1. Indstilling af alarmen

Tryk på ALARM SÆT button once. The alarm time will flash on the display.
Tryk på TIMESÆT button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
Tryk på MINUTSÆT knappen for at justere alarmminut.
Tryk på ALARM SÆT knappen igen for at bekræfte og afslutte alarmindstillingstilstand.

2. Turning Alarm On/Off

For at slå alarmen til ON, tryk på ALARM TIL / FRA button. The alarm indicator light on the display will illuminate.
For at slå alarmen til SLUKKET, tryk på ALARM TIL / FRA button again. The alarm indicator light will turn off.

3. Snooze-funktion

Når alarmen lyder, skal du trykke på den store SLUM button located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.

4. Dimmer Control

Sådan justerer du lysstyrken på LED-skærmen:

Tryk på DIMMER HI/LO knappen til at skifte mellem høj og lav lysstyrke.

Nærbillede view of the Sharp Digital Alarm Clock display, highlighting the high and low dimmer control feature.

Figure 4: Display brightness adjustment.

Opretholdelse

Battery Replacement (CR2032)

The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage.g., batteriet skal muligvis udskiftes.

Unplug the clock from the electrical outlet.
Locate the screw-secured battery compartment on the bottom of the clock.
Unscrew the compartment cover and carefully remove the old CR2032 battery.
Isæt et nyt CR2032-batteri, og sørg for at polerne vender korrekt (+ siden opad).
Sæt dækslet på igen, og fastgør det med skruen.
Plug the clock back into the electrical outlet.

Note: Bortskaf gamle batterier ansvarligt i henhold til lokale regler.

Fejlfinding

Problem	Mulig årsag	Løsning
Urdisplayet er tomt.	Ingen strøm.	Ensure the clock is securely plugged into a working electrical outlet. Check the power source.
Tidspunktet er forkert.	Incorrect time zone selected; DST switch incorrect; Power interruption.	Verify the time zone switch on the bottom of the clock. Check the DST switch position. If power was interrupted, the AccuSet should reset the time; if not, check/replace backup battery.
Alarmen lyder ikke.	Alarm ikke aktiveret; Forkert alarmtidspunkt indstillet.	Ensure the alarm indicator light is on (press ALARM ON/OFF button). Verify the alarm time is set correctly.
Skærmen er for lys/mørket.	Dæmperindstillingen skal justeres.	Press the DIMMER HI/LO button to cycle through brightness settings.

Specifikationer

Mærke: Skarp
Model: B089ZMSR39
Farve: Black-red Led
Skærmtype: Digital
Speciel funktion: Automatisk indstilling
Produktdimensioner: 5.5 cm B x 2.6 cm H
Strømkilde: Elektrisk med ledning
Backup batteri: 1 x CR2032 Lithium Ion (included)
Varens vægt: 10.2 ounce
UPC: 049353004426
Fabrikant: Skarp

Diagram showing the dimensions of the Sharp Digital Alarm Clock: 5.5 inches wide, 2.6 inches high, and 2.45 inches deep. The display size is 0.9 inches.

Figur 5: Produktdimensioner.

Yderligere oplysninger

For further assistance or product inquiries, please refer to the official Sharp webwebsted eller kontakt deres kundesupport.

Dette produkt er kun designet til indendørs brug.

	SHARP Atomic Wall Clock: Setup, Features, and Manual Comprehensive instruction manual for the SHARP Radio Controlled Atomic Wall Clock (Model SPC876), covering setup, time zone settings, DST, signal reception, manual setting, and warranty information.
	Sharp Atomic Clock SPC1019 Instruktioner og garanti Brugermanual og garantioplysninger til Sharp Atomic Clock SPC1019, med detaljer om opsætning, tidsindstilling, alarmfunktioner og fejlfinding.
	SHARP SPC971 Atomic vægur brugermanual og instruktioner Detaljerede instruktioner og sikkerhedsoplysninger til SHARP SPC971 Atomic vægur, der dækker opsætning, batteriudskiftning og betjening.
	Sharp SPC1003/1005 Atomisk Vejrstation Brugermanual Omfattende guide til Sharp SPC1003/1005 Atomic Weather Station, med detaljerede oplysninger om funktioner, opsætning, kontroller og specifikationer for præcis overvågning af tid, vejr og miljø.
	Sharp Atomic Wall Clock SPC971: Instruktioner og garanti Brugermanual og garantioplysninger til Sharp Atomic vægur (model SPC971), med detaljer om opsætning, funktioner og et års begrænset garanti.
	Sharp SPC276 Digitalt Vækkeur med Bluetooth og Søvnlyde: Brugervejledning Omfattende guide til betjening af Sharp SPC276 digitalt vækkeur, der dækker funktioner, opsætning, alarmfunktioner, Bluetooth-forbindelse, søvnlyde og sikkerhedsforanstaltninger.

Sharp B089ZMSR39