Sharp Digital Vækkeur med Røde LED'er - Model SPC387 Brugsanvisning

Indledning

This manual provides comprehensive instructions for setting up, operating, and maintaining your Sharp Digital Alarm Clock (Model SPC387). This clock features a clear red LED display, dual alarms, an ascending alarm volume, and battery backup for continued operation during power outages. Designed for ease of use, it is suitable for all users.

Sharp Digital Alarm Clock, front view with red LED display showing 12:08 PM

Figur 1: Forside view of the Sharp Digital Alarm Clock, displaying 12:08 PM in red LEDs.

Produktegenskaber

Simple & Hassle-Free Operation: Designed for ease of use.
Easy-Set Dual Alarms: Program two separate alarm times.
Gentle Ascending Alarm: Alarmvolumen stiger gradvist.
Batteri-sikkerhedskopi: Maintains settings during power outages (requires 2x AA batteries, sold separately).
Large Easy-Read Red LED Display: Bold, bright numbers for clear visibility.

Diagram highlighting key features of the Sharp Digital Alarm Clock: 0.7 inch red LED display, dual alarm, ascending alarm volume, easy-set top button controls, and optional battery backup.

Figure 2: Diagram illustrating the main features of the alarm clock, including the display size, dual alarm capability, ascending alarm, top controls, and battery backup option.

Opsætningsinstruktioner

1. Strømtilslutning

Plug the AC power cord into a standard 120V AC wall outlet. The display will illuminate, and the clock will be ready for time setting.

2. Installation af batteribackup

For battery backup, open the battery compartment cover located on the bottom of the unit. Insert two (2) new AA batteries (not included), observing the correct polarity (+ and -). Close the battery compartment cover. The battery backup feature will maintain time and alarm settings during a power interruption, but the display will not be illuminated.

Bund view of the Sharp Digital Alarm Clock showing the battery compartment open, ready for AA batteries.

Figure 3: The underside of the alarm clock, showing the battery compartment for backup power.

Betjeningsvejledning

1. Indstilling af tid

Tryk og hold på TID button. The time display will begin to flash.
Mens du holder TID knappen, tryk på TIME knappen for at justere timetallet. Se PM-indikatoren for korrekt AM/PM-indstilling.
Mens du stadig holder TID knappen, tryk på MINUT knappen for at justere minutterne.
Slip TID knappen for at indstille tiden.

2. Setting the Alarm (Dual Alarm)

This clock supports two independent alarms (AL1 and AL2).

Skub til ALARM 1/2/DUAL switch to select either AL1 or AL2. The corresponding alarm indicator (AL1 or AL2) will illuminate on the display.
Tryk og hold på ALARM button. The alarm time display will begin to flash.
Mens du holder ALARM knappen, tryk på TIME button to adjust the alarm hour. Observe the PM indicator.
Mens du stadig holder ALARM knappen, tryk på MINUT knappen for at justere alarmens minutter.
Slip ALARM button to set the alarm time.
For at aktivere alarmen skal du sørge for, at ALARM TIL / FRA switch is in the ON position. The selected alarm indicator (AL1 or AL2) will remain lit.
To set the second alarm, repeat steps 1-6, selecting the other alarm (AL2 or AL1).

Top view of the Sharp Digital Alarm Clock with labels for each button: Alarm On/Off, Hour, Minute, Time, Alarm, and Alarm 1/2/Dual switch, plus the large Snooze button.

Figur 4: Overview of the control buttons on the top of the alarm clock for setting time and alarms.

3. Brug af snooze-funktionen

Når alarmen lyder, skal du trykke på den store SLUM button located on the top of the clock. The alarm will temporarily stop and sound again after approximately 9 minutes.

4. Turning Off the Alarm

To turn off the alarm completely, slide the ALARM TIL / FRA switch to the OFF position. The alarm indicator (AL1 or AL2) will turn off.

5. Ascending Alarm Volume

The alarm starts at a low volume and gradually increases, providing a gentle wake-up experience. If not turned off, the alarm will continue to increase in volume and frequency.

Sharp Digital Alarm Clock on a bedside table, displaying 12:08 PM, with text 'ASCENDING ALARM VOLUME' below.

Figure 5: The alarm clock positioned on a nightstand, illustrating its compact size and the ascending alarm feature.

Opretholdelse

Clean the clock with a soft, dry cloth. Do not use abrasive cleaners or solvents.
Undgå at udsætte enheden for ekstreme temperaturer, direkte sollys eller høj luftfugtighed.
Replace backup batteries annually to ensure reliable performance.

Fejlfinding

Problem	Løsning
Displayet er tomt.	Ensure the AC power cord is securely plugged into a working outlet. If using battery backup, the display will not light up; it only preserves settings.
Alarmen lyder ikke.	Tjek om ALARM TIL / FRA switch is in the ON position. Verify the alarm time is set correctly and the PM indicator is accurate.
Time/Alarm settings are lost after power outage.	Ensure fresh AA batteries are installed correctly in the battery backup compartment.
Clock feels hot.	Unplug the clock immediately and discontinue use. Contact customer support.
Alarm is too quiet/loud.	The alarm volume is ascending. Allow time for it to increase. There is no manual volume adjustment.
Forkert voltage warning (UK/Gulf regions).	This clock is designed for 110V-120V AC power. It is not compatible with 220V-240V systems without a proper voltage converter. Using an incorrect voltage may damage the unit and pose a safety risk.

Specifikationer

Mærke: Skarp
Model: SPC387
Farve: Black - Red LED
Skærmtype: Digital LED
Produktdimensioner: 5.5 cm B x 2.1 cm H
Strømkilde: Electrical (AC) with Battery Backup (2x AA batteries, not included)
Materiale: Plast
Varens vægt: 8.8 ounce
Speciel funktion: Dual Alarm, Ascending Alarm Volume, Snooze Function

Garanti og support

This product comes with a Limited Warranty from Sharp. For detailed warranty information or technical support, please refer to the documentation included in your product packaging or visit the official Sharp webwebsted.

For further assistance, you may also contact the seller, The Clock Shop - Sharp, through their Amazon store page.

Producent: SHARP

	SHARP SPC189/SPC193 LED-vækkeur med USB-port: Brugsanvisning og garanti Official instruction manual and warranty information for the SHARP SPC189 and SPC193 LED Alarm Clock with USB charging ports. Learn how to set time, alarm, use snooze, USB charging, and safety precautions.
	SPC268 Solopgangsvækkeur med USB-port: Brugsanvisning og garanti Officiel brugsanvisning og garantioplysninger til SHARP SPC268 Solopgangsvækkeur med USB-port. Lær, hvordan du indstiller uret og alarmer, bruger solopgangs- og farveskiftende lys, og forstår sikkerhedsforanstaltninger.
	SHARP SPC543 Projektionsvækkeur med USB-port - Brugsanvisning Official instruction manual and warranty information for the SHARP SPC543 Projection Alarm Clock with USB Port. Learn how to set the clock, alarm, date, use the projection feature, and understand safety instructions.
	SHARP SPC500 LCD Digital Alarm Clock User Manual and Instructions Official user manual and instructions for the SHARP SPC500 LCD Digital Alarm Clock. Learn how to set the time, set the alarm, use the snooze and backlight features, and understand power supply and battery warnings. Includes FCC information.
	SHARP SPC483/SPC222 LCD Digital Alarm Clock User Manual User manual providing instructions for setting up and operating the SHARP SPC483 and SPC222 LCD Digital Alarm Clocks, including features, power, care, and FCC compliance.
	Sharp SPC182 LED Alarm Clock with USB Port - Instruction Manual and Warranty Official instruction manual and warranty information for the Sharp SPC182 LED Alarm Clock with USB Port. Learn about features, setup, operation, safety precautions, and customer support.

Sharp SPC387