1. Introduktion
This manual provides essential instructions for the safe and efficient use of your Philips S6305/00 Wireless Speaker. Designed for portability and robust performance, this speaker features Bluetooth 5.0 connectivity, IPX7 waterproofing, a 20-hour battery life, and a power bank function. Please read this manual thoroughly before using your device.
2. Produktfunktioner
- IPX7 vandtæt bedømmelse: The speaker is designed to withstand immersion in up to 1 meter of water for up to 30 minutes, making it suitable for use near pools or in the shower. Ensure the port cover is securely closed before water exposure.
- Forlænget batterilevetid: Nyd op til 20 timers kontinuerlig musikafspilning på en enkelt opladning.
- Integreret powerbank: Use the USB port to charge your smart devices directly from the speaker's battery.
- Bluetooth 5.0-forbindelse: Provides a stable wireless connection with a range of up to 20 meters.
- Dynamisk lyd: Equipped with two 2.25-inch full-range drivers and two passive bass radiators for clear audio and powerful bass.
- Flerfarvede LED-lys: LED lights at the ends of the speaker pulsate to the beat of your music, enhancing the listening experience.
- Stereo parring: Connect two Philips S6305/00 speakers for an immersive stereo sound experience.
3. Kom godt i gang
3.1 Pakkens indhold
- Philips S6305/00 Wireless Speaker
- Hurtig installationsvejledning
- Garantiseddel
- Worldwide Warranty Leaflet
- USB-opladerkabel (Type-C)
3.2 Opladning af højttaleren
Before first use, fully charge the speaker. Connect the supplied USB charging cable to the speaker's USB-C port and to a USB power adapter (not included). The battery indicator LEDs will illuminate during charging. A full charge typically takes several hours.
3.3 Tænd/sluk
Tryk på Power-knap (
) located on the top panel to turn the speaker on or off. The speaker will automatically power off after 15 minutes of inactivity to conserve battery.
Figure 1: Top control panel of the Philips S6305/00 speaker, displaying power, Bluetooth, play/pause, volume, and LED light buttons.
3.4 Bluetooth -parring
- Sørg for, at højttaleren er tændt.
- Tryk og hold på Bluetooth knap () for a few seconds until the Bluetooth indicator light flashes, indicating pairing mode.
- Aktiver Bluetooth på din enhed (smartphone, tablet osv.) og søg efter tilgængelige enheder.
- Select "Philips S6305/00" from the list. Once connected, the Bluetooth indicator light will glow steadily.
3.5 Audio-In Connection
For devices without Bluetooth, connect an audio cable (not included) from your device's headphone jack to the speaker's 3.5mm audio-in port. The speaker will automatically switch to audio-in mode.
4. Betjeningsvejledning
4.1 Grundlæggende kontroller
- Afspil/pause: Tryk på Afspil/pause knap () to play or pause audio.
- Lydstyrkekontrol: Tryk på Lydstyrke op (+) or Skrue ned (-) knapper for at justere lydstyrken.
- Spring spor over: Dobbelttryk på Lydstyrke op (+) button for next track, or Skrue ned (-) button for previous track.
4.2 LED-lysstyring
The multi-colored LED lights activate automatically when the speaker is powered on. To cycle through light modes or turn them off, press the Lystilstand knap () on the control panel. The speaker does not retain the last light setting; lights will be on by default upon each power cycle.
Figure 2: The Philips S6305/00 speaker displaying its multi-colored LED lights, which pulsate with the music.
4.3 Using the Power Bank Function
To charge an external device, connect it to the speaker's USB-A output port using an appropriate charging cable (not included). The speaker will begin charging the connected device.
4.4 Stereoparring (TWS)
To achieve true wireless stereo sound, you can pair two Philips S6305/00 speakers:
- Sørg for, at begge højttalere er tændt og ikke er forbundet til nogen Bluetooth-enhed.
- På én højttaler (dette vil være den primære højttaler) skal du trykke på og holde Stereo parringsknap (often indicated by two interlocking circles or a similar icon, refer to quick start guide for exact icon).
- The primary speaker will search for the secondary speaker. Once connected, an audible tone will confirm the stereo pairing.
- Connect your device to the primary speaker via Bluetooth as described in section 3.4. Audio will now play in stereo across both speakers.
5. Vedligeholdelse
5.1 Rengøring
Tør højttaleren af med en blød, damp cloth. Do not use abrasive cleaners or solvents. Ensure the speaker is dry before charging or exposing to water.
5.2 Vandtæthedspleje
Always ensure the rubber cover for the charging and audio-in ports is securely sealed before exposing the speaker to water. While the speaker is IPX7 rated, direct water streams can temporarily muffle sound due to the fabric covering the speakers. Sound quality will return to normal once the fabric dries.
Figure 3: The Philips S6305/00 speaker shown amidst water splashes, highlighting its IPX7 waterproof capability.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Højttaleren tænder ikke. | Batteriet er afladet. | Connect the speaker to a power source using the USB-C cable and charge it. |
| Kan ikke parres via Bluetooth. | Højttaleren er ikke i parringstilstand; enhedens Bluetooth er slået fra; højttaleren er allerede forbundet til en anden enhed. | Ensure speaker is in pairing mode (flashing Bluetooth LED). Turn off and on your device's Bluetooth. Disconnect from other devices. |
| Ingen lyd eller lav lydstyrke. | Volume too low on speaker or source device; incorrect input source selected. | Increase volume on both speaker and source device. Ensure correct input (Bluetooth or Audio-in) is active. |
| Sound is muffled after water exposure. | Water trapped in the speaker's fabric cover. | Allow the speaker to air dry completely. Sound quality will return once the fabric is dry. |
| Battery level indicator is unclear. | Battery indicator LEDs only show charge status when connected to power. A green flashing Bluetooth LED indicates low battery. | Connect the speaker to a charger to view the current battery level. Charge when the green Bluetooth LED flashes. |
7. Specifikationer
Figur 4: En intern view of the Philips S6305/00 speaker, illustrating its dual full-range drivers and passive bass radiators.
- Model: S6305/00 (TAS6305/00)
- Mærke: Philips
- Forbindelse: Bluetooth 5.0, Stereo Audio (3.5mm jack), USB 2.0 (for power bank)
- Trådløs rækkevidde: Op til 20 meter
- Udgangseffekt: 20 watt (2 x 10 watt)
- Højttalerdrivere: 2 x 2.25-inch full-range drivers, 2 x passive bass radiators
- Batteritype: Lithium-ion (4 påkrævet, inkluderet)
- Batterilevetid: Op til 20 timer
- Strømkilde: Battery Powered, 5 Volts (DC) input
- Vandtæt vurdering: IPX7
- Produktdimensioner: 10D x 23W x 10H centimeter
- Varens vægt: 0.8 kilogram (800 g)
- Materiale: Plast
- Inkluderede komponenter: Bluetooth speaker, quick install guide, warranty card, world wide warranty leaflet
- Særlige funktioner: Microphone function (for calls)
8. Garanti og support
Your Philips S6305/00 Wireless Speaker comes with a limited warranty. Please refer to the included Warranty Leaflet and Worldwide Warranty Leaflet for detailed terms and conditions, including coverage period and claim procedures.
For technical support, service, or further inquiries, please visit the official Philips support website or contact their customer service department. Contact information can typically be found in the warranty documentation or on the Philips brand webwebsted.
