HUBERT B089T5FZCB

HUBERT Floor Standing Hand Soap Dispenser with Sign

Instruktionsmanual

Produkt overview

The HUBERT Floor Standing Hand Soap Dispenser with Sign is designed for convenient and hygienic hand sanitization or soap dispensing in various environments. This automatic, hands-free unit features a durable stainless steel stand with a weighted base for stability and includes a drip tray to maintain cleanliness. The dispenser is refillable and compatible with gel or liquid soap and hand sanitizer (foam not supported). A clear window allows for easy monitoring of product levels, and a blinking LED light indicates when battery replacement is needed. For security, the dispenser includes a lock and key. A removable red 'STOP The Spread of Germs' sign is also included to promote hand hygiene.

Nøglefunktioner:

  • Stainless steel stand with weighted base for stability.
  • Automatic, hands-free operation for enhanced hygiene.
  • Compatible with gel or liquid soap/sanitizer (1000 ml capacity).
  • Dispenses 0.8 ml per use.
  • Integrated drip tray to prevent floor messes.
  • Clear window for easy product level monitoring.
  • Blinking LED light for low battery indication.
  • Includes lock and key for security.
  • Removable 'STOP The Spread of Germs' sign.
HUBERT Floor Standing Hand Soap Dispenser with Sign

Figure 1: Fully assembled HUBERT Floor Standing Hand Soap Dispenser with the 'STOP' sign attached.

Opsætning og montering

Minor assembly is required to set up your dispenser. Please follow these steps carefully:

  1. Udpak komponenter: Carefully remove all components from the packaging. You should have the stand base, the vertical pole sections, the dispenser unit, the drip tray, the 'STOP' sign, and any necessary hardware (screws, lock and key).
  2. Saml stativet: Attach the vertical pole sections to the weighted base. Ensure all connections are secure.
  3. Installer batterier: The dispenser requires 4 C batteries (not included). Open the battery compartment, typically located on the back or side of the dispenser unit, and insert the batteries according to the polarity markings. Close the compartment securely.
  4. Attach Dispenser to Stand: Secure the dispenser unit to the top of the assembled stand. Ensure it is firmly attached and stable.
  5. Installer drypbakke: Slide or clip the drip tray into its designated position directly below the dispenser nozzle. This tray collects any excess liquid and helps keep the floor clean.
  6. Attach Sign (Optional): If desired, attach the 'STOP The Spread of Germs' sign to the top of the dispenser unit using the provided hardware. The stand can be used with or without this sign.
Side view of dispenser on stand

Figur 2: Side view of the dispenser unit mounted on the stand, showing the drip tray.

Dispenser open showing internal reservoir

Figure 3: The dispenser unit with its front cover open, revealing the internal reservoir for refilling.

Betjeningsvejledning

The HUBERT dispenser is designed for simple, hands-free operation.

  1. Påfyldning af dispenseren: Unlock the dispenser using the provided key and open the front cover. Remove the internal cartridge/reservoir. Fill the reservoir with your preferred gel or liquid hand soap or sanitizer. Do not use foam products. The capacity is 1000 ml (33.81 oz). Reinsert the cartridge and close the cover, ensuring it locks securely.
  2. Automatisk dispensering: Place your hands approximately 2-4 inches below the dispenser nozzle. The built-in sensor will detect your hands and automatically dispense approximately 0.8 ml of product.
  3. Product Level Monitoring: The clear window on the front of the dispenser allows for quick visual inspection of the product level. Refill when the level is low to ensure continuous operation.
Close-up of dispenser with drip tray

Figur 4: Nærbillede view of the dispenser's nozzle and drip tray, ready for use.

Opretholdelse

Regelmæssig vedligeholdelse sikrer din dispensers levetid og optimale ydeevne.

  • Genopfyldning: As described in the 'Operating Instructions', refill the dispenser with gel or liquid soap/sanitizer when the product level is low. Always use the provided key to unlock and open the dispenser.
  • Rensning: Regularly wipe down the exterior of the dispenser and the stand with a soft, damp cloth. Clean the drip tray frequently to prevent accumulation of dispensed product and maintain hygiene. The drip tray can be removed for thorough cleaning.
  • Udskiftning af batteri: A blinking LED light on the dispenser indicates that the batteries are low and need replacement. Replace all 4 C batteries simultaneously to ensure proper function. Dispose of old batteries responsibly.
  • Sikkerhed: Always ensure the dispenser is locked after refilling or maintenance to prevent theft or tampering.

Fejlfinding

If you encounter issues with your HUBERT dispenser, refer to the following common solutions:

ProblemMulig årsagLøsning
Dispenser not dispensingLavt eller dødt batteriCheck for blinking LED light. Replace all 4 C batteries.
Tømt reservoirCheck product level through the clear window and refill if necessary.
Incorrect product typeEnsure only gel or liquid soap/sanitizer is used. Foam products are not compatible.
SensorblokeringEnsure nothing is blocking the sensor below the nozzle.
Dispenser leakingReservoir not seated correctlyOpen the dispenser, remove and re-seat the internal reservoir firmly.
Overfyldt reservoirDo not overfill the reservoir. Ensure it is filled to the recommended level.
Sign is wobbly or looseSign not securely attachedTighten the screws securing the sign to the dispenser unit.

Specifikationer

AttributDetalje
ModelnummerB089T5FZCB
MærkeHUBERT
MaterialePlastic (Dispenser), Stainless Steel (Stand)
FarveBlack (Dispenser & Stand), Red (Sign)
Dispenser kapacitet1000 ml (33.81 oz)
Dispense Volume0.8 ml per use
Strømkilde4 x C Batteries (not included)
Varens vægt21 pund
Pakkedimensioner18 x 16 x 7 tommer
Først tilgængelig8. juni 2020

Garanti og support

For warranty information or technical support regarding your HUBERT Floor Standing Hand Soap Dispenser, please contact the manufacturer or the seller directly. The seller for this product is Hubert Company.

Hubert Company Contact:

Relaterede dokumenter - B089T5FZCB

Preview Monteringsvejledning til Hubert automatisk sæbedispenser
Samlevejledning til Hubert automatisk sæbedispenserstativ. Denne vejledning beskriver kontrol af komponenter og trinvis montering af dispenserstativet.
Preview HUBERT A1110 Option Overvoltage-beskyttelse (OVP) Brugsanvisning
Brugsanvisning til HUBERT A1110-seriens strømforsyning ampløfter med Overvoltage-beskyttelse (OVP)-mulighed. Dækker sikkerhed, drift, vedligeholdelse og integration i testsystemer.
Preview HUBERT A1110-P4 Multi-AmpBrugsanvisning til adapter
Denne betjeningsvejledning indeholder detaljerede instruktioner til HUBERT A1110-P4 Multi-AmpLifier-Adapter, der dækker dens funktioner, sikkerhedsforanstaltninger, betjening, vedligeholdelse og tekniske specifikationer. Den er designet til brugere, der integrerer enheden i automatiserede testsystemer.
Preview HUBERT A1110-40-QE 4-Quadrant Voltage og Nuværende Amplifier Datablad
Datasheet for the HUBERT A1110-40-QE, a high-performance, linear, extreme-broadband, precision 4-quadrant voltage og nuværende amplifier. Designed for applications requiring fast-changing signals, it offers flexible operation as a voltage eller nuværende amplifier with features like adjustable output, comprehensive software control, and robust protection mechanisms. Suitable for research, development, EMC testing, MRI, and more.
Preview HUBERT CMD-100 Current Measuring Device Datasheet
Datasheet for the HUBERT CMD-100, a galvanically isolated current and voltage measuring instrument for laboratory and testing applications. Features include switchable gain, BNC outputs, and internal power supply.
Preview Hubert Company LLC skatteyderidentifikations- og certificeringsoplysninger
Detaljer fra IRS-formular W-9 for Hubert Company, LLC, herunder dens føderale skatteklassificering, skatteyderidentifikationsnummer (EIN) og certificering, sammen med supplerende virksomhedsoplysninger fra Hubert Company, LLC og dets moderselskab TAKKT America Holding, Inc.