1. Introduktion
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Lepro 32.8ft RGB LED Strip Lights. This kit includes two 16.4ft flexible LED strips, a 44-key IR remote control, and a 12V power supply. The LED strips offer a wide range of colors and dynamic modes, suitable for various indoor lighting applications.
Figure 1: Complete Lepro LED Strip Lights Kit
2. Pakkens indhold
Bekræft at alle komponenter er til stede i pakken:
- 2 x 16.4ft (5m) RGB LED Strip Lights
- 1 x 44-Key IR Remote Control
- 1 x 12V strømadapter
- 1 x Control Box (IR Receiver)
3. Installation og opsætning
Følg disse trin for korrekt installation:
- Forbered overfladen: Ensure the installation surface is clean, dry, and smooth. Dust, oil, or moisture can affect the adhesive's performance.
- Measure and Cut (Optional): If a shorter length is required, the LED strip can be cut along the designated cut marks (usually every 3 LEDs). Use sharp scissors to ensure a clean cut. Do not cut at any other point.
- Fastgør strimlen: Carefully peel off the backing from the 3M adhesive tape on the back of the LED strip. Press the strip firmly onto the desired surface.
- Forbind komponenter:
- Connect the LED strip(s) to the control box. Ensure the arrows on the connectors align.
- Connect the 12V power adapter to the control box.
- Sæt strømadapteren i en almindelig stikkontakt.
- Aktivér fjernbetjening: Before using the remote control, remove the transparent plastic insulation sheet from the battery compartment.
Figure 2: Connection Diagram for LED Strip Lights
For a visual guide on installation and various applications, please refer to the official product video below:
Video 1: Official Lepro LED Strip Lights Overview and Application Examples. This video demonstrates the product's features and shows various installation scenarios in different rooms.
4. Betjeningsvejledning
The 44-key IR remote control allows you to manage the LED strip lights. Point the remote directly at the IR receiver on the control box for optimal response.
Figure 3: 44-Key IR Remote Control Layout
Fjernbetjeningsfunktioner:
- Til/fra: Power button to turn the lights on or off.
- Justering af lysstyrke: Up/Down arrows to increase or decrease brightness.
- Farvevalg: 20 preset static colors, including Red, Green, Blue, and White.
- Gør-det-selv farver: 6 programmable buttons (DIY1-DIY6) to save custom colors. Press a DIY button, then use the R/G/B up/down arrows to adjust the color, and press the DIY button again to save.
- Dynamiske tilstande: 8 pre-programmed lighting modes (e.g., JUMP3, JUMP7, FADE3, FADE7, AUTO, FLASH, QUICK, SLOW) for various effects.
5. Vedligeholdelse
To ensure the longevity and optimal performance of your LED strip lights, follow these maintenance guidelines:
- Rensning: Gently wipe the LED strips with a dry, soft cloth to remove dust. Avoid using liquid cleaners or abrasive materials.
- Miljø: These lights are designed for indoor use. Avoid exposure to water, high humidity, or extreme temperatures.
- Pleje af klæbemiddel: The 3M adhesive is strong. If repositioning is necessary, do so carefully to avoid damaging the strip or the surface. Ensure the surface is clean before initial application to maximize adhesion.
6. Fejlfinding
If you encounter issues with your LED strip lights, consult the following table for common problems and solutions:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lysene tænder ikke. |
|
|
| Fjernbetjening virker ikke. |
|
|
| Some LEDs show incorrect color or are off. |
|
|
| LED strip falls off surface. |
|
|
7. Produktspecifikationer
| Feature | Detalje |
|---|---|
| Mærke | Lepro |
| Modelnummer | 410084-RGB-US-NF-a |
| Farve | RGB (rød, grøn, blå) |
| Indendørs/Udendørs brug | Indendørs |
| Speciel funktion | Dæmpbar |
| Lyskildetype | LED |
| Strømkilde | Elektrisk med ledning |
| Materiale | Kobber, Plast |
| Controller type | Fjernbetjening |
| Antal lyskilder | 300 (total for 32.8ft) |
| Voltage | 12 volt |
| Wattage | 36 watt |
| Varens vægt | 0.33 kilo (11.6 ounce) |
| Varelængde | 32.8 Feet (2 x 16.4ft) |
8. Garantioplysninger
Dette produkt er omfattet af en 2 års garanti from the date of purchase. The warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accidents, unauthorized modifications, or improper installation.
9. Kundesupport
For technical assistance, warranty claims, or any questions regarding your Lepro LED Strip Lights, please contact Lepro customer support through their official website or the retailer where the product was purchased. Please have your model number (410084-RGB-US-NF-a) and proof of purchase available when contacting support.
