iBeam Micro Camera Black med fast vinkel brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Sikkerhedsoplysninger

• Frakobl altid køretøjets batteri, før du påbegynder nogen form for elektrisk installation.
• Ensure all wiring is properly insulated and secured to prevent short circuits or damage.
• Bloker ikke førerens view or interfere with vehicle controls during installation.
• Kontakt en professionel installatør, hvis du er usikker på nogen del af installationsprocessen.
• This product is intended as an aid and should not replace safe driving practices.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• Ledningsnet
• Instruktionsmanual (dette dokument)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Produktet er slutview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Billede: Et nærbillede view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Nøglefunktioner:

• Kompakt design: Small footprint for discreet installation.
• Vandtæt: IP68-klassificeret for pålidelig ydeevne under forskellige vejrforhold.
• Billedsensor: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view eller foran view).
• Montering: Features an 8MM threaded bolt for secure mounting.

5. Opsætning og installation

Follow these steps for proper installation of your iBeam Micro Camera:

1. Vælg monteringssted: Select a location that provides an unobstructed view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. Forbered monteringsoverfladen: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Monter kameraet: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Ledningsforbindelser:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Test funktionalitet: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Sikker ledningsføring: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Betjeningsvejledning

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Billedretning: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Vedligeholdelse

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• Rensning: Rengør kameralinsen regelmæssigt med en blød kludamp klud til at fjerne snavs, støv eller vandpletter, der kan blokere view. Do not use abrasive cleaners.
• Inspektion: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Undgå højtryksspuling: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

8. Fejlfinding

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Specifikationer

10. Garanti og support

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam webwebsted. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Fabrikant: Metra Electronics Corp