1. Introduktion
The HELLA VALUEFIT 450 LED is a compact LED high beam headlamp with an integrated LED position light, featuring a modern reflector design. It utilizes 15 bright, high-performance LEDs and a full-surface, faceted reflector to provide homogeneous illumination for optimal visibility. This lamp is designed for universal use across various vehicle types, including 4x4s, SUVs, pickup trucks, and other vehicles. It facilitates an easy transition from traditional halogen to advanced LED technology.
The compact design of the LED high beam headlamp allows for installation in smaller spaces. Its robust die-cast aluminum housing is equipped with cooling fins to efficiently dissipate heat from the high-performance LEDs, ensuring longevity and consistent performance. A sturdy stainless steel fastening bracket provides a secure, vibration-proof hold. The HELLA VALUEFIT 450 LED offers adjustable tilt angles and supports both upright and pendant mounting configurations.

2. Hvad er der i æsken
Your Hella ValueFit 450 LED Driving Lamp package includes the following components:
- 1x Hella ValueFit 450 LED Driving Lamp
- 1x Black Stone Shield/Cover
- Mounting Bracket (Stainless Steel)
- Monteringsudstyr (skruer, møtrikker, skiver)
- Installationsvejledning


3. Opsætning og installation
The Hella ValueFit 450 LED Driving Lamp is designed for straightforward installation on various vehicle applications. Please follow these general guidelines for proper setup. Refer to the included mounting instructions for detailed, step-by-step procedures specific to your vehicle type.
3.1 Monteringssted
- Lamp is suitable for universal use on ATVs, UTVs, trucks, cars, and other off-road vehicles.
- Consider mounting locations that provide optimal light distribution and are protected from potential damage. Common locations include the front bumper, grille, or roof rack.
3.2 Monteringsretning
Lamp can be installed in two orientations:
- Upright Mounting: Lamp is positioned with the mounting bracket below the main light unit.
- Vedhængsmontering: Lamp is positioned with the mounting bracket above the main light unit.
Ensure the chosen orientation aligns with your vehicle's aesthetics and functional requirements. The tilt angles can be easily readjusted after initial installation.
3.3 Ledningsføring
Tilslut lamp to your vehicle's electrical system according to the provided wiring diagram in the installation instructions. It is recommended to use a relay and fuse for proper circuit protection and to ensure the lamp receives adequate power. If you are unsure about the wiring process, consult a qualified automotive electrician.



4. Betjeningsvejledning
Once properly installed and wired, the Hella ValueFit 450 LED Driving Lamp operates as an auxiliary lighting unit. It is designed to provide additional illumination beyond your vehicle's standard headlights, particularly useful in off-road conditions or areas requiring enhanced visibility.
4.1 Tænd/sluk
Lamp is typically connected to a dedicated switch within your vehicle's cabin. Activate the switch to turn the lamp on and off. Ensure your vehicle's ignition is on to supply power to the auxiliary lighting circuit.
4.2 Lysudgang
The Hella ValueFit 450 LED Driving Lamp provides a powerful light output of 3000 lumens. This high output, combined with its homogeneous illumination, significantly improves visibility in challenging environments. The integrated LED accent light also provides a distinct visual signature.

5. Vedligeholdelse
The Hella ValueFit 450 LED Driving Lamp is designed for durability and minimal maintenance. Regular care will ensure optimal performance and longevity.
5.1 Rengøring
- Rengør lamp's lens and housing to remove dirt, mud, and debris. Use a soft cloth and mild soap solution. Avoid abrasive cleaners or harsh chemicals that could damage the lens or finish.
- Lamp is waterproof, allowing for cleaning with a gentle water spray, but avoid high-pressure washing directly on the lens or seals.
5.2 Eftersyn
- Regularly inspect the mounting hardware for tightness. Vibrations from vehicle operation can loosen fasteners over time.
- Check the wiring for any signs of wear, fraying, or corrosion. Ensure all connections remain secure.
- Undersøg lamp housing for any physical damage. The robust die-cast aluminum housing is designed to withstand harsh conditions, but extreme impacts can cause damage.
6. Fejlfinding
If you experience issues with your Hella ValueFit 450 LED Driving LampOvervej følgende fejlfindingstrin:
6.1 Lamp Tænder ikke
- Tjek strømtilslutning: Sørg for at lamp is properly connected to the vehicle's power source and that the ignition is on.
- Inspicer sikring: Verify that the fuse in the auxiliary lighting circuit is not blown. Replace if necessary with a fuse of the correct ampslette.
- Test switch: Confirm that the control switch for the lamp fungerer korrekt.
- Undersøg ledninger: Look for any loose, disconnected, or damaged wires. Secure or repair as needed.
6.2 Dim or Flickering Light
- Voltage Tjek: Sørg for at lamp modtager tilstrækkelig voltage (10-30 VDC). Low voltage can cause dimming or flickering.
- Ren linse: A dirty lens can reduce light output. Clean the lens as described in the Maintenance section.
- Ledningsintegritet: Check for any loose or corroded connections that might be causing intermittent power supply.
If these steps do not resolve the issue, please contact Hella customer support for further assistance.
7. Specifikationer
| Feature | Specifikation |
|---|---|
| Mærke | Hella |
| Modelnummer | 358154041 |
| Varedimensioner (L x B x H) | 7.87 x 7.28 x 3.86 tommer |
| Varens vægt | 2.64 pund (1.2 kilo) |
| Lysudgang | 3000 lm |
| Antal lysdioder | 15 high-power LEDs |
| Materiale | Hus i trykstøbt aluminium |
| Speciel funktion | Vandtæt |
| Auto del position | Front |
| Anbefalede anvendelser | Vehicle Exterior, Vehicle Interior |
| Inkluderede komponenter | Aux Light, Black Stone Shield/Cover, Mounting Instructions |
8. Garanti og support
Hella products are manufactured to high-quality standards and are backed by a manufacturer's warranty. For specific warranty details, including coverage period and terms, please refer to the documentation included with your product or visit the official Hella webwebsted.
For technical support, replacement parts, or any inquiries regarding your Hella ValueFit 450 LED Driving Lamp, please contact Hella customer service. You can find contact information and additional resources on the official Hella webhjemmeside eller gennem deres Amazon Brand Store:
Visit the Hella Brand Store on Amazon






