1. Introduktion
This manual provides detailed instructions for the safe and effective use of your Femometer Digital Thermometer, model DMT-2032. This device is designed for accurate temperature measurement for adults and children via oral, rectal, or underarm methods. Please read this manual thoroughly before first use and keep it for future reference.
Image 1: Femometer Digital Thermometer DMT-2032 with its retail packaging.
2. Produktfunktioner
- Nøjagtig måling: Utilizes an advanced sensory probe for precise temperature detection.
- Alsidig brug: Suitable for oral, rectal, and underarm temperature measurement for all ages.
- LCD skærm: Clear digital display for easy reading.
- Hukommelsesgenkaldelse: Stores the last measured temperature reading.
- Feberalarm: Provides an audible beep when measurement is complete, and may indicate fever.
- C/F Switchable: Easily switch between Celsius (°C) and Fahrenheit (°F) units.
- Advarsel om lavt batteri: Angiver, hvornår batteriet skal udskiftes.
- Automatisk sluk: Automatically shuts down to conserve battery life.
- Vandtæt tip: Allows for simple and hygienic cleaning.
- Protective Storage Case: Included for convenient storage and portability.
Billede 2: Overview of the thermometer's key features.
3. Opsætning
3.1. Batteriinstallation
The Femometer Digital Thermometer comes with one LR41 battery pre-installed. If the battery needs replacement, follow these steps:
- Gently slide off the battery cover located at the end of the thermometer.
- Fjern det gamle LR41-batteri.
- Insert a new LR41 battery with the positive (+) side facing up.
- Sæt batteridækslet forsvarligt på plads.
3.2. Første opstart
Press the power button to turn on the thermometer. A short beep will sound, and the display will show all segments briefly, followed by the last measured temperature. Then, 'Lo' with a flashing '°C' or '°F' will appear, indicating the thermometer is ready for measurement.
4. Betjeningsvejledning
4.1. At foretage en måling
- Sørg for, at termometret er rent og desinficeret.
- Tryk på tænd/sluk-knappen for at tænde enheden.
- Position the thermometer according to the desired measurement method (oral, rectal, or underarm).
- Hold the thermometer in place until a series of beeps indicates the measurement is complete. For accurate readings, continue holding for approximately 60 seconds after the initial beep.
- Aflæs temperaturen, der vises på LCD-skærmen.
- Tryk på tænd/sluk-knappen for at slukke termometret, ellers slukker det automatisk efter cirka 10 minutters inaktivitet.
Image 3: The thermometer can be used for oral, rectal, and underarm temperature measurement.
4.2. Measurement Methods
- Oral anvendelse: Place the tip of the thermometer under the tongue. Close your mouth and hold the thermometer in place.
- Rektal brug: Lubricate the tip with a water-soluble jelly. Gently insert the tip into the rectum (approximately 0.5 inches for infants). This method is generally recommended for infants and young children.
- Anvendelse under arm (aksillær): Place the tip of the thermometer in the armpit, ensuring good skin contact. Hold the arm firmly against the body. This method may provide less accurate readings than oral or rectal methods.
Image 4: Oral temperature measurement.
Image 5: Rectal temperature measurement.
Image 6: Underarm temperature measurement.
4.3. Skift af temperaturenheder (°C/°F)
To switch between Celsius and Fahrenheit, ensure the thermometer is off. Press and hold the power button for approximately 3-5 seconds until the unit changes on the display.
Image 7: Switching between Celsius and Fahrenheit.
5. Vedligeholdelse
5.1. Rengøring og desinfektion
The thermometer tip is waterproof and can be cleaned easily. After each use, wipe the tip with a soft cloth moistened with rubbing alcohol (70% isopropyl alcohol) or an antiseptic solution. Do not immerse the entire thermometer in water or any cleaning solution.
Image 8: The waterproof tip allows for easy cleaning.
5.2. Udskiftning af batteri
When the low battery indicator (a flashing battery icon) appears on the display, it is time to replace the LR41 battery. Refer to section 3.1 for battery installation instructions.
Image 9: Low battery alarm indication.
5.3. Opbevaring
Store the thermometer in its protective case in a cool, dry place, away from direct sunlight and extreme temperatures.
6. Fejlfinding
If you encounter any issues with your thermometer, please refer to the table below for common problems and their solutions.
| Fejlmeddelelse | Problem | Løsning |
|---|---|---|
| Lo | Den målte temperatur er lavere end 90.0°F (32.0°C). | Turn off, wait one minute, and take a new temperature via close contact and sufficient rest. |
| Hi | Temperature taken is higher than 109.9°F (42.9°C). | Turn off, wait one minute, and take a new temperature via close contact and sufficient rest. |
| Err | Systemet fungerer ikke korrekt. | Unload the battery, wait for 1 minute, and repower it. If the message reappears, contact the retailer for service. |
| Battery Icon Flashing | Dead battery; battery icon is flashing, cannot be measured. | Udskift batteriet. |
Image 10: Troubleshooting guide for common display messages.
7. Specifikationer
| Modelnummer | DMT-2032 |
| Produktdimensioner | 5.9 x 2.1 x 0.8 tommer |
| Vægt | 1.13 ounce |
| Strømkilde | 1 x LR41 battery (included) |
| Display Type | Digital LCD |
| Målenøjagtighed | ± 0.1 ° C / 0.2 ° F |
| Særlige funktioner | High Accuracy, Fever Alert, Memory Recall, C/F Switchable, Waterproof Tip, Auto Off |
| Ydermateriale | Plast |
| Produktpleje | Tør Clean |
| Fabrikant | JOYTECH Healthcare Co., Ltd. |
8. Garanti og support
Femometer is committed to providing reliable products and customer satisfaction.
- Lifetime Unlimited Warranty: Your Femometer Digital Thermometer is backed by a lifetime warranty.
- Kundesupport: Dedicated 24/7 customer support is available to assist you with any questions or concerns.
- Certificeringer: This product is FDA/MDL/CE certified, ensuring quality and safety standards.
Image 11: Reliable brand information including certifications and support.
