BFT Portåbner P125002 SB-BAT 24v DC Batteri Backup Kit Brugermanual

1. Produktet er slutview

The BFT SB-BAT (P125002) is a 24v DC battery backup system designed to ensure continuous operation of your gate opener even during power outages. This kit provides a reliable power source, activating automatically when the main power supply is interrupted and recharging when power is restored.

It is compatible with various BFT gate opener models, including the Deimos BT series, VIRGO - LINX, EOS-SCE, HYDRA N, DEIMOS BT-QSC D-NETTUNO S, SB BAT/SB CARBAT (DEIMOS BT-SB 300), BT BAT 2 (URANO BT ARES 1000 & ARES 1500) NETTUNO B, VENERE D, ARGO, LIBRA C MA - LIBRA C LX.

BFT P125002 SB-BAT Battery Backup Kit components

Figure 1: Contents of the BFT P125002 SB-BAT Battery Backup Kit, including batteries, wiring, and mounting hardware.

2. Opsætning og installation

Installation of the BFT SB-BAT kit is designed to be straightforward. It integrates with your existing BFT gate opener system.

2.1. Sikkerhedsforanstaltninger

Ensure the main power to the gate opener is disconnected before beginning installation.
Brug passende personlige værnemidler (PPE).
Refer to your specific gate opener's manual for compatibility and connection points.

2.2. Installationstrin

Udpak komponenter: Carefully remove all items from the packaging. Verify all components are present as shown in Figure 1.
Mount the Battery Housing: Securely mount the battery housing unit near your gate opener's control board, ensuring it is protected from environmental elements.
Tilslut batterier: Insert the two 12V 1.2Ah batteries into the housing. Connect them according to the wiring diagram provided with the kit (typically in series to achieve 24V DC).
Connect to Gate Opener: Connect the battery backup system's wiring to the designated battery input terminals on your BFT gate opener's control board. Consult your gate opener's manual for precise terminal locations.
Sikker ledningsføring: Ensure all wiring is neatly routed and secured to prevent accidental disconnections or damage.
Gendan strøm: Once all connections are secure and verified, restore main power to the gate opener. The smart charger board will begin charging the batteries.

Close-up of BFT P125002 SB-BAT components including batteries and wiring

Figur 2: En lukker view of the battery backup kit components, highlighting the batteries and connection wires.

3. Betjening

The BFT SB-BAT battery backup system operates automatically to provide uninterrupted gate functionality.

Normal drift: When main power is available, the smart charger board continuously charges and maintains the batteries.
Power Outage: I tilfælde af en magt outage, the system automatically switches to battery power, allowing the gate opener to continue functioning normally.
Strømgendannelse: Once main power is restored, the system automatically switches back to main power and resumes charging the batteries.

4. Vedligeholdelse

Regelmæssig vedligeholdelse sikrer levetiden og pålideligheden af dit batteri-backupsystem.

Visuel inspektion: Periodically inspect the batteries and wiring for any signs of damage, corrosion, or loose connections.
Renhed: Keep the battery housing and terminals clean and free of dust or debris.
Batterisundhedstjek: While the system has an intelligent charger, it is advisable to periodically test the battery backup by temporarily disconnecting main power to ensure the gate operates on battery power. Reconnect main power after testing.
Udskiftning af batteri: Batteries have a finite lifespan. If you notice a significant decrease in backup operation time, it may be time to replace the batteries. Use only recommended replacement batteries (2x 12V 1.2Ah).

5. Fejlfinding

This section addresses common issues you might encounter with your BFT SB-BAT battery backup kit.

Problem	Mulig årsag	Løsning
Gate does not operate during power outage.	Batterierne er ikke opladet. Løse eller forkerte ledningsforbindelser. Batteries are at end of life. Sikring sprunget.	Ensure main power is connected and the charger board is functioning. Allow 12-14 hours for full charge. Check all wiring connections between the battery kit and the gate opener. Test batteries; replace if necessary. Check and replace the 20A fuse if blown.
Batteries do not seem to be charging.	Problem med hovedstrømforsyningen. Faulty charger board. Forkert batteritilslutning.	Verify main power to the gate opener. Contact BFT support for charger board diagnosis. Recheck battery wiring according to the manual.

6. Specifikationer

Key technical specifications for the BFT SB-BAT (P125002) battery backup system:

Model: P125002 SB-BAT
System Voltage: 24V DC
Charge Voltage: 27.2V
Ladestrøm: 130mA
Batterikapacitet: 2x (12V 1.2Ah)
Exhausted Battery Protection Threshold: 20.4V
Batteriopladningstid: 12-14 timer
Sikring: 20A
Fabrikant: BFT

7. Garanti og support

For warranty information or technical support, please refer to the documentation included with your purchase or contact BFT customer service directly. Keep your proof of purchase for warranty claims.

You can find more information about BFT products on their official webwebsted eller gennem autoriserede distributører.

	BFT DEIMOS BT UL/CSA Elektromekanisk Portautomationssystem Oplev BFT DEIMOS BT UL/CSA, et elektromekanisk automatiseringssystem til skydeporte i reoler. Med smart teknologi, 24V sikker drift og forenklet installation forbedrer dette system portsikkerheden og bekvemmeligheden. Udforsk dets tekniske specifikationer og tilgængeligt tilbehør til private og erhvervsmæssige anvendelser.
	BFT VIRGO Installationsmanual til automatisering af svingporte Omfattende installations- og brugervejledning til BFT VIRGO svingportsautomationssystem, der dækker sikkerhed, tekniske specifikationer, installationsprocedurer, programmering og vedligeholdelse.
	Installationsvejledning til BFT CLONIX1-2 & MITTO 2-4 433MHz radiostyringssystem Omfattende installationsvejledning til BFT CLONIX1-2-modtageren og MITTO 2-4 433MHz radiostyringssendere, der dækker programmering, kloning, sikkerhed og tekniske specifikationer for port- og dørautomation.
	Installationsvejledning til BFT THALIA: Quadro Comandi per Automazione Cancelli Denne vejledningtagliata illustra l'installazione e la configurazione del quadro comandi BFT THALIA, progettato per l'automazione di cancelli e porte. Inkluder specifik teknik, skema for kollegium og vejledning, der garanterer og fungerer effektivt.
	BFT Phobos BT Kit UL hurtig referencevejledning Lynvejledning til BFT Phobos BT Kit UL automatisk portåbnersystem, der dækker installation, ledningsføring, programmering og fejlfinding.
	Instruktioner til kodning af BFT MITTO 2B fjernbetjening \| Retro fjernbetjeninger Trin-for-trin-vejledning til kodning af BFT MITTO 2B fjernbetjeninger til portåbnere, der dækker eksisterende fjernbetjenings- og modtager-LCD-skærmmetoder. Indeholder fejlfindingstips.

BFT P125002 SB-BAT