VONETS VAP11AC Dual Band AC1200 Trådløs Bridge Repeater Mini Router Brugermanual

1. Introduktion

The VONETS VAP11AC is a versatile dual-band AC1200 wireless device designed to function as a WiFi Bridge, Repeater, Mini Router, WiFi to RJ45 Ethernet Adapter, and WiFi Hotspot Signal Extender. It supports both 2.4GHz and 5GHz wireless frequencies, offering a combined theoretical data transfer rate of up to 1200Mbps. This device is equipped with a smart cooling fan for stable operation and includes a 12V/1A power supply adapter.

This manual will guide you through the setup, configuration, and operation of your VAP11AC device to ensure optimal performance in various networking scenarios.

Figure 1.1: VONETS VAP11AC device with included accessories.

2. Produktfunktioner

• Dual Band Wireless: Supports 2.4GHz (300Mbps) and 5GHz (900Mbps) for a total of 1200Mbps theoretical speed.
• Flere driftstilstande: Functions as a WiFi Router, WiFi Signal Repeater, WiFi AP Hotspot, and WiFi Bridge.
• Ethernet-forbindelse: Features one 10/100Mbps adaptive Ethernet port for wired connections.
• Smart køleventilator: Integrated fan for automatic heat dissipation, enhancing device stability.
• Wide Voltage Power Input: Operates on DC5V-24V (typical 12V/1A), with a 12V/1A power supply included.
• Kompakt design: Mini industrial design suitable for various environments.
• Signal Strength Detection (SSA): Supports reporting of signal strength.
• Memory Hotspot Function: Automatically connects to up to 100 remembered hotspots.

Figure 2.1: VAP11AC highlighting its dual-band 1200Mbps capabilities.

3. Opsætningsvejledning

3.1 Pakkens indhold

Før du fortsætter, skal du sørge for at alle elementer er til stede:

• VONETS VAP11AC Device
• 12V/1A Power Supply Adapter
• Ethernet Cable (approx. 30cm with RJ45 connector)
• Power Cable (approx. 30cm with DC and USB ports)

3.2 Første tilslutning

1. Connect the power cable to the VAP11AC device's DC port.
2. Plug the 12V/1A power adapter into a power outlet and connect it to the power cable.
3. Wait for the device to power on. The LED indicators will illuminate.
4. For initial configuration, connect your computer to the VAP11AC device using the provided Ethernet cable. Alternatively, you can connect wirelessly to the VAP11AC's default WiFi network (SSID and password typically found on the device label or in the quick start guide).

3.3 Web Interface adgang

1. Åbn a web browser on your connected computer.
2. Indtast standard-IP-adressen (f.eks. 192.168.254.254) i adresselinjen og tryk på Enter.
3. Log in using the default username and password (refer to the device label or quick start guide for credentials).
4. Once logged in, you can configure the device's operating mode and network settings.

Figure 3.1: VAP11AC with power and Ethernet connections.

4. Driftstilstande

The VAP11AC supports several operating modes to suit different networking requirements.

4.1 WiFi Bridge Mode

In Bridge mode, the VAP11AC converts a WiFi signal into a wired Ethernet connection. This is ideal for devices that only have an Ethernet port but need to connect to a wireless network, such as desktop computers, network printers, surveillance cameras, or DVRs.

1. Få adgang til web interface and select Bridge mode.
2. Scan for available WiFi networks and select your desired network.
3. Enter the WiFi password if required.
4. Connect your wired device to the VAP11AC's Ethernet port.

Figure 4.1: VAP11AC in WiFi Bridge mode.

4.2 WiFi Repeater-tilstand

Repeater mode extends the coverage of an existing WiFi network. The VAP11AC receives the wireless signal from your main router and re-broadcasts it, eliminating dead zones and improving signal strength in areas with weak coverage.

1. Få adgang til web interface and select Repeater mode.
2. Scan for available WiFi networks and select the network you wish to extend.
3. Enter the WiFi password. The VAP11AC will then extend this network.

Figure 4.2: VAP11AC in WiFi Repeater mode and AP application.

4.3 WiFi-routertilstand

In Router mode, the VAP11AC acts as a primary router, creating a new wireless network. This is suitable for scenarios where you have a wired internet connection (e.g., from a modem) and need to share it wirelessly with multiple devices.

1. Få adgang til web interface and select Router mode.
2. Configure WAN settings (e.g., DHCP, Static IP, PPPoE) based on your internet service provider.
3. Set up your new WiFi network's SSID and password.
4. Connect your modem's Ethernet cable to the VAP11AC's Ethernet port.

Figure 4.3: VAP11AC in WiFi Router mode.

4.4 AP (Access Point) Mode

AP mode allows the VAP11AC to create a wireless network from an existing wired network. This is useful for adding WiFi capabilities to a wired-only network, such as in hotel rooms or offices.

1. Få adgang til web interface and select AP mode.
2. Configure the SSID and password for the new wireless network.
3. Connect the VAP11AC's Ethernet port to your wired network.

Figur 4.4: Overview of VAP11AC application modes.

5. Vedligeholdelse

5.1 Smart køleblæser

The VAP11AC features a smart cooling fan designed to activate automatically after 5-10 minutes of normal operation to dissipate heat and ensure stable performance. The fan will also automatically shut down when cooling is no longer required.

This fan function can be configured manually via the web interface, allowing you to disable it, set it to automatic control, or periodic automatic control.

Figure 5.1: VAP11AC with smart cooling fan in operation.

5.2 Generel pleje

• Keep the device in a well-ventilated area to assist with heat dissipation.
• Undgå at udsætte enheden for ekstreme temperaturer, fugt eller direkte sollys.
• Clean the device periodically with a soft, dry cloth. Do not use liquid cleaners.
• Sørg for, at alle kabler er korrekt tilsluttet.

6. Fejlfinding

6.1 Enheden tændes ikke

• Verify the power adapter is correctly connected to the device and a working power outlet.
• Ensure the power adapter is the correct 12V/1A type provided with the device.

6.2 Kan ikke få adgang Web Interface

• Confirm your computer is connected to the VAP11AC via Ethernet or its default WiFi network.
• Ensure your computer's IP settings are configured to obtain an IP address automatically (DHCP).
• Double-check the default IP address (192.168.254.254) i din browser.
• Prøv at rydde din browsers cache eller brug en anden browser.
• If you have changed the device's IP address and forgotten it, perform a factory reset (see 6.5 Factory Reset).

6.3 Ingen internetforbindelse

• In Repeater or Bridge mode, ensure the VAP11AC is successfully connected to your main router's WiFi network and the password is correct.
• In Router mode, verify your WAN settings are correctly configured for your internet service provider.
• Check the status of your main router or modem.

6.4 Bekymringer om overophedning

While the VAP11AC has a smart cooling fan, some users have reported the device becoming warm during extended use. Ensure the device is placed in an area with adequate airflow and that the fan vents are not obstructed. If overheating persists, consider adjusting the fan settings in the web interface or contacting support.

6.5 Fabriksindstilling

To restore the device to its factory default settings:

1. With the device powered on, locate the Reset button (usually a small pinhole).
2. Use a paperclip or similar pointed object to press and hold the Reset button for approximately 5-10 seconds.
3. Release the button when the device's lights flash or it reboots.
4. Enheden genstarter med fabriksindstillingerne. Du skal konfigurere den igen.

7. Specifikationer

Figure 7.1: VAP11AC product specification overview.

8. Garanti og support

For garantioplysninger og teknisk support henvises til den officielle VONETS webwebstedet eller kontakt din forhandler. Gem din købskvittering til garantikrav.

Official VONETS Webwebsted: www.vonets.com (Note: This is a placeholder link, please verify the actual support webwebsted.)