1. Introduktion
This manual provides essential information for the safe and effective use of the TURCK WKB 3T-4 Cable Assembly. This product is a high-quality industrial cable designed for reliable electrical connections in various applications. Please read this manual thoroughly before installation and operation.
Figure 1: TURCK WKB 3T-4 Cable Assembly featuring a right-angle 1/2-20UNF female connector. The cable is yellow and the connector housing is metallic.
2. Sikkerhedsoplysninger
Always observe the following safety precautions to prevent injury or damage to the product and connected equipment:
- Afbryd strømmen: Ensure all power to the system is disconnected before installing, removing, or performing any maintenance on the cable assembly.
- Korrekt håndtering: Do not bend, twist, or pull the cable excessively. Avoid sharp edges or abrasive surfaces that could damage the cable jacket.
- Miljøforhold: Use the cable within its specified voltage, current, and temperature ratings. While rated for indoor/outdoor use, protect connections from direct water ingress unless specifically designed for submersible applications.
- Kvalificeret personale: Installation og vedligeholdelse bør kun udføres af kvalificeret personale, der er bekendt med elektriske systemer og sikkerhedsprocedurer.
- Efterse før brug: Before each use, visually inspect the cable and connector for any signs of damage, wear, or corrosion. Do not use if damage is observed.
3. Produktet er slutview og komponenter
The TURCK WKB 3T-4 Cable Assembly is designed for robust industrial connectivity. Key features include:
- Connector Type: Right Angle 1/2-20UNF Female Connector.
- Ledningskonfiguration: 3-wire cable.
- Kabellængde: 4 meters (4M).
- Elektriske klassifikationer: 4 Amperes (4A), 250 Volts (250V).
- Cable Jacket: AWM PVC (Appliance Wiring Material, Polyvinyl Chloride) for durability and flexibility.
- Farve: Black cable jacket.
- Anvendelse: Velegnet til både indendørs og udendørs applikationer.
4. Opsætning og installation
Follow these steps for proper installation of the cable assembly:
- Forberedelse: Ensure the mating male connector on your device or system is clean and free of debris. Verify that the system is powered off and de-energized.
- Justering: Carefully align the right-angle female connector of the WKB 3T-4 cable assembly with the corresponding male connector.
- Forbindelse: Gently push the connector together until it seats firmly. The right-angle design allows for connections in confined spaces.
- Sikker forbindelse: Rotate the threaded coupling nut on the female connector clockwise until it is hand-tight. Do not overtighten, but ensure a secure connection to prevent accidental disconnection or ingress of contaminants.
- Kabelføring: Route the cable in a manner that avoids sharp bends, kinks, or areas where it could be pinched, cut, or exposed to excessive heat or abrasion. Use cable ties or clamps if necessary to secure the cable path.
- Verifikation: After installation, visually inspect the connection to ensure it is fully seated and secured.
5. Betjeningsvejledning
The TURCK WKB 3T-4 Cable Assembly functions as a passive electrical conduit, transmitting power and/or signals between connected devices. Once properly installed, its operation is dependent on the connected equipment.
- Ensure the cable is not subjected to stresses beyond its design limits (e.g., excessive pulling force, sharp impacts).
- Verify that the connected devices are operating within the cable's specified voltage and current ratings (4A, 250V).
- The right-angle design is particularly useful for applications where space is limited or where the cable needs to run parallel to a surface immediately after the connection point.
6. Vedligeholdelse
Regular maintenance helps ensure the longevity and reliable performance of your cable assembly:
- Rensning: Periodically clean the exterior of the cable and connector with a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild detergent can be used, ensuring the connector pins are dry before re-connecting.
- Inspektion: Regularly inspect the cable jacket for cracks, cuts, abrasions, or discoloration. Check the connector for bent pins, corrosion, or loose components.
- Forbindelsesintegritet: Periodically check the tightness of the connector's coupling nut to ensure it remains secure.
- Opbevaring: When not in use, store the cable in a clean, dry environment, away from extreme temperatures and direct sunlight. Avoid coiling the cable too tightly.
7. Fejlfinding
This section addresses common issues you might encounter with the cable assembly.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| No power/signal transmission | Løs forbindelse Beskadiget kabel/stik Incorrect wiring (external to cable) | Ensure connector is fully seated and coupling nut is tight. Inspect cable for visible damage; replace if damaged. Verify wiring of connected devices. |
| Intermitterende forbindelse | Løs forbindelse Corrosion on pins Intern kabelskade | Tighten coupling nut. Clean connector pins carefully (with power off). Replace cable if internal damage is suspected. |
| Connector difficult to mate | Fejljustering Affald i stikket Bent pins | Ensure correct orientation and alignment. Clean connector thoroughly. Inspect for bent pins; if found, cable may need replacement. |
8. Specifikationer
Detailed technical specifications for the TURCK WKB 3T-4 Cable Assembly:
| Attribut | Værdi |
|---|---|
| Modelnummer | WKB 3T-4 |
| Mærke | TURK |
| Connector Type | Right Angle 1/2-20UNF Female |
| Ledningskonfiguration | 3 Tråd |
| Kabellængde | 4 meter (4M) |
| Nuværende vurdering | 4 Amperes (4A) |
| Voltage Bedømmelse | 250 Volts (250V) |
| Kabeljakke materiale | AWM PVC |
| Farve | Sort |
| Indendørs/Udendørs brug | Indendørs, Udendørs |
| Form | Rund |
| Første ledige dato | 30. april 2020 |
9. Garanti og support
TURCK products are manufactured to high standards and are typically covered by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the official TURCK website or contact your authorized distributor.
For technical support, product inquiries, or assistance with troubleshooting beyond the scope of this manual, please contact TURCK customer service or your local TURCK representative. Contact information can usually be found on the official TURCK webwebsted (www.turck.com).
