APC BR1500MS 1500VA Sine Wave UPS User Manual

1. Introduktion

This manual provides essential instructions for the installation, operation, and maintenance of your APC BR1500MS Uninterruptible Power Supply (UPS). The BR1500MS is designed to protect your electronic equipment from power outages, surges, and spikes, ensuring continuous power and safeguarding your data.

2. Sikkerhedsoplysninger

Please read these instructions carefully before installing or operating the UPS. Failure to follow these instructions may result in damage to the unit, injury, or electric shock.

• The UPS contains internal batteries that are not user-serviceable. Refer to qualified service personnel for battery replacement.
• Bortskaf ikke batterier i åben ild, da de kan eksplodere.
• Batterier må ikke åbnes eller ødelægges. Frigivet elektrolyt er skadelig for hud og øjne.
• Connect the UPS power cable directly to a wall outlet. Do not use extension cords or surge protectors with the UPS input.
• Ensure the UPS is installed in a well-ventilated area, away from direct sunlight, excessive heat, or moisture.
• UPS'en er kun beregnet til indendørs brug.

3. Pakkens indhold

Verify that you have received all the following items with your APC BR1500MS UPS:

• APC BR1500MS UPS Unit
• USB kommunikationskabel
• Brugervejledning (dette dokument)
• PowerChute Personal Edition-software-cd (eller downloadvejledning)

4. Produktet er slutview

Familiarize yourself with the components of your APC BR1500MS UPS.

Figur 4.1: Frontpanel View
This image displays the front of the APC BR1500MS UPS, highlighting its LCD screen, power button, and USB charging ports. The screen shows battery status, load, and estimated runtime.

Frontpanelets funktioner:

• LCD-skærm: Provides real-time status information such as battery charge, load level, estimated runtime, and various operational modes.
• Power knap: Bruges til at tænde eller slukke UPS'en.
• Menu/Scroll Buttons: Navigate through the LCD display options.
• USB Charging Ports (Type-A and Type-C): Provide power for charging mobile devices.

Figur 4.2: Bagpanel View
This image shows the rear panel of the APC BR1500MS UPS, detailing the various outlets for battery backup and surge protection, data line protection ports, and the circuit breaker.

Bagpanelets funktioner:

• Batteribackup og overspændingsbeskyttede stikkontakter: Provide power from the battery during outagog beskytte mod overspænding.
• Kun overspændingsudtag: Provide surge protection only, without battery backup.
• Data Line Protection (Ethernet/Coaxial): Protects network and cable connections from surges.
• USB-kommunikationsport: Connects the UPS to a computer for power management software.
• Afbryder: Resettable overload protection.
• Indikator for bygningsledningsfejl: Illuminates if a wiring problem is detected in the wall outlet.

5. Opsætning

5.1 Indledende placering

Place the UPS on a flat, stable surface in a cool, dry, and well-ventilated indoor area. Avoid placing it near heat sources, direct sunlight, or excessive dust.

5.2 Tilslutning af udstyr

1. Connect to Wall Power: Sæt UPS-strømkablet direkte i en jordet stikkontakt med 3 ben. Brug ikke forlængerledninger eller overspændingsbeskyttere.
2. Tilslut batteri: The battery may be disconnected for shipping. Refer to the quick start guide or internal instructions to connect the battery terminals if necessary.
3. Connect Devices to Battery Backup Outlets: Plug critical equipment such as your computer, monitor, and external hard drives into the Batteribackup og overspændingsbeskyttet outlets. These outlets provide power during an outage.
4. Connect Devices to Surge Only Outlets: Plug non-critical equipment like printers or scanners into the Kun overspænding Disse stikkontakter yder overspændingsbeskyttelse, men ingen batteribackup.
5. Tilslut datalinjer (valgfrit): If desired, connect your network cable (Ethernet) or coaxial cable through the respective data line protection ports on the rear panel.
6. Connect USB Communication Cable: Connect one end of the USB cable to the UPS USB port and the other end to your computer. This enables communication for the PowerChute software.

Figure 5.1: Typical Desktop Setup
This image illustrates a common setup where the APC BR1500MS UPS is positioned on a desk, providing power and protection to a desktop computer and monitor.

5.3 Indledende tænding

After connecting all equipment, press the power button on the front panel to turn on the UPS. The LCD display will illuminate, and the UPS will begin charging its battery.

6. Betjening af UPS'en

6.1 Display på frontpanelet

The LCD display provides various status indicators. Use the menu buttons to cycle through information such as:

• Input bindtage
• Udgang Voltage
• Belastningsprocenttage
• Batteriopladningsniveau
• Estimeret køretid
• Hændelseslog

6.2 Tænd/sluk

• At tænde: Press and hold the power button until a beep is heard and the LCD illuminates.
• At slukke: Press and hold the power button until a beep is heard and the LCD turns off.

6.3 Batteribackupdrift

Under en magt outage, the UPS will automatically switch to battery power, providing continuous power to connected equipment on the battery backup outlets. The LCD will indicate 'On Battery' and display the estimated runtime.

6.4 USB-opladningsporte

The front panel features USB-A and USB-C charging ports (5V, 3.0A total) for convenient charging of mobile devices, even when the UPS is off (as long as it is connected to wall power).

Figure 6.1: USB Device Charging
This image demonstrates a smartphone being charged via the USB port on the front of the APC BR1500MS UPS, highlighting its utility for mobile devices.

6.5 PowerChute Personal Edition Software

For advanced power management, install the PowerChute Personal Edition software on your computer. This software allows for:

• Safe system shutdown during extended power outages.
• Customizable UPS settings.
• Overvågning af energiforbrug.
• Diagnostic capabilities.

Download the latest version from the official APC webwebsted.

7. Vedligeholdelse

7.1 Udskiftning af batteri

The internal battery typically lasts 3-5 years. When the battery needs replacement, the UPS will indicate a 'Replace Battery' warning on the LCD. Contact APC support or an authorized service center for replacement batteries and instructions. Always use genuine APC replacement batteries.

7.2 Rengøring

Rengør UPS'ens yderside regelmæssigt med en blød, tør klud. Brug ikke flydende rengøringsmidler eller aerosolrengøringsmidler. Sørg for, at ventilationsåbningerne er fri for støv og blokeringer.

7.3 Opbevaring

If storing the UPS for an extended period, ensure the battery is fully charged, then disconnect it from wall power and store it in a cool, dry place. Recharge the battery every 3-6 months to prevent permanent damage.

8. Fejlfinding

Se tabellen nedenfor for almindelige problemer og deres løsninger.

9. Specifikationer

10. Garantioplysninger

APC by Schneider Electric provides a standard warranty for this product. The specific terms and duration of the warranty may vary by region and product type. Please refer to the warranty card included with your product or visit the official APC webwebstedet for detaljerede garantioplysninger. Gem din købsbevis til garantikrav.

11. Support

For technical support, troubleshooting assistance, or information on replacement parts, please visit the official APC by Schneider Electric support website or contact their customer service. You can find contact details and online resources at www.apc.com/support.