1. Introduktion
The Sunmi Printer V1S W5920 is a versatile mobile Point-of-Sale (POS) terminal designed for efficient business operations. It integrates an Android operating system, a high-speed thermal printer, and a barcode scanner, providing a comprehensive solution for various retail and service environments. This manual provides essential information for the proper setup, operation, and maintenance of your device.
2. Enhed overview
Figur 2.1: Front view of the Sunmi V1S W5920, illustrating its display and user interface.
Figur 2.2: Sunmi V1S W5920 with an optional handheld scanner accessory.
Figur 2.3: Side view of the Sunmi V1S W5920 with the printer compartment open, showing paper roll insertion.
3. Opsætning
3.1 Indledende opladning
Before first use, fully charge the device. Connect the provided USB Type-C cable to the device's charging port and the other end to a compatible power adapter. The charging indicator will illuminate during charging and turn off when complete.
3.2 Installation af termisk papir
- Open the printer cover by gently pressing the release button or latch, typically located on the side or top of the printer compartment (refer to Figure 2.3).
- Insert a new thermal paper roll (58mm width, 40mm diameter) into the compartment, ensuring the paper feeds from the bottom and the leading edge extends slightly out of the slot.
- Close the printer cover firmly until it clicks into place. Ensure there is no slack in the paper roll.
3.3 Tænd/sluk
- For at tænde: Press and hold the power button (usually on the side) for a few seconds until the screen illuminates.
- For at slukke: Press and hold the power button until a power-off menu appears on the screen. Select 'Power Off' and confirm.
4. Betjeningsvejledning
4.1 Android OS Navigation
The device runs on Android 6.0. Navigate the interface using the 5.5-inch HD IPS capacitive touchscreen. Standard Android gestures such as tap, swipe, pinch-to-zoom, and long-press apply.
4.2 Forbindelse til netværk
- Wi-Fi: Go to Settings > Wi-Fi, turn Wi-Fi on, and select your desired network. Enter the password if prompted.
- Bluetooth: Go to Settings > Bluetooth, turn Bluetooth on, and pair with other Bluetooth-enabled devices.
- 3G: Insert a compatible SIM card (if applicable) and configure mobile data settings via Settings > More > Mobile networks.
4.3 Udskrivning
The integrated thermal printer supports 58mm wide paper with a printing speed of 60mm/s. Printing is typically initiated by applications installed on the device. Ensure paper is loaded correctly and the printer cover is closed.
4.4 Barcode and QR Code Scanning
The device includes an integrated reader for QR and barcode scanning. Open a scanning application or a POS application that utilizes the scanner. Position the barcode or QR code within the scanner's field of view until it is successfully read.
5. Vedligeholdelse
5.1 Rengøring af enheden
Use a soft, dry cloth to clean the exterior of the device. For the screen, use a screen-specific cleaning solution and a microfiber cloth. Do not use abrasive cleaners or immerse the device in water.
5.2 Printer Head Maintenance
To ensure optimal print quality and extend the life of the print head (rated for 50 km), periodically clean it with an alcohol swab. Ensure the device is powered off before cleaning the print head.
5.3 Pleje af batterier
To prolong battery life, avoid exposing the device to extreme temperatures. Charge the device regularly and avoid completely draining the battery frequently.
6. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Enheden tænder ikke. | Lavt batteri; enheden er frosset. | Oplad enheden i mindst 30 minutter. Udfør en tvungen genstart ved at holde tænd/sluk-knappen nede i 10-15 sekunder. |
| Printeren udskriver ikke. | No paper; paper jammed; printer cover open. | Check paper supply and load new roll. Clear any paper jams. Ensure printer cover is securely closed. |
| Dårlig printkvalitet. | Dirty print head; incorrect paper type. | Clean the print head. Ensure you are using thermal paper. |
| Kan ikke oprette forbindelse til Wi-Fi/Bluetooth. | Wi-Fi/Bluetooth off; out of range; incorrect password. | Ensure Wi-Fi/Bluetooth is enabled in settings. Move closer to the access point. Verify password. |
7. Specifikationer
- Operativsystem: Android 6.0
- Processor: 1.3 GHz, Quadcore
- VÆDDER: 1 GB
- ROM: 8 GB
- Vise: 5.5 inches, 1280 × 720 pixels, HD IPS Capacitive
- Kamera: 5.0 MP AF
- Netværk: 3G (GSM 900/1800, WCDMA 900/2100), Wi-Fi (802.11 b/g/n), Bluetooth
- Batteri: 3.7V / 5200mAh
- Printertype: Termisk printer
- Papirbredde: 58 mm
- Udskrivningshastighed: 60 mm/s
- Printhovedets levetid: 50 km
- Papirrullens diameter: 40 mm
- Driftstemperatur: 5 til 40 grader celsius
- Forbindelse: USB Type-C (for charging and OTG)
8. Garanti og support
8.1 Garantioplysninger
This product is covered by a standard manufacturer's warranty. Please refer to the warranty card included in the original packaging for specific terms, conditions, and duration. Keep your proof of purchase for warranty claims.
8.2 Teknisk support
For technical assistance, troubleshooting beyond this manual, or service requests, please contact your authorized SUNMI dealer or visit the official SUNMI support website. Ensure you have your device model number (V1S W5920) and serial number ready when contacting support.
