Moukey MAMP2 Mini Amplivligere brugervejledning

Indledning

Thank you for choosing the Moukey MAMP2 Mini Amplifier. This compact and powerful audio receiver is designed to enhance your home audio experience with versatile input options including Bluetooth 5.0, USB, AUX, and FM radio. Please read this manual carefully to ensure proper setup and operation of your device.

Nøglefunktioner

• Kompakt og kraftfuld: Small design (4.85"W x 3.05"D x 1.65"H) with 50W peak power dual-channel sound, utilizing an original AC6922A amplifer-chip.
• Bluetooth 5.0-forbindelse: Upgraded Bluetooth 5.0 ensures stable connection up to 50ft with low latency, supporting speakers with 4-16 ohm impedance.
• Multiple Input Sources: Supports AUDIO (RCA), USB (up to 32G, MP3/APE/WAV/WMA formats), and wireless Bluetooth connection.
• FM radio funktion: Integrated FM mode for news, music, sports, and finance.
• Fjernbetjening: Infrared remote control for volume and mode adjustments. Note: Remote controls amplifier volume only, not external equipment volume, and cannot select songs in AUX mode.

Pakkens indhold

• Moukey MAMP2 Mini Amplivligere
• Fjernbetjening
• Power Supply (DC12V/3A)
• FM antenne

Opsætningsvejledning

1. Tilslutning af højttalere

Connect your passive speakers to the "ROUT LOUT" (Left/Right Output) terminals on the rear panel of the amplifier. Ensure correct polarity (red to positive, black to negative) for optimal sound quality. The amplifier supports speakers with 4-16 ohm impedance.

Billede: Tilslutninger på bagpanelet af Moukey MAMP2 amplifier, illustrating speaker and input ports.

2. Tilslutning af strøm

Plug the provided DC12V/3A power supply into the "DC12/3A" port on the rear of the amplifier, then connect the power supply to a wall outlet.

3. Tilslutning af indgangskilder

MAMP2 amplifier offers multiple ways to connect your audio sources:

• Bluetooth-forbindelse:

  Skift til amplifier to Bluetooth mode using the "MODE" button. The BT indicator light will illuminate. On your device (e.g., smartphone, tablet), enable Bluetooth and search for "MAMP2". Select it to connect. A beep sound will confirm successful pairing (if speakers are connected).

  

  Billede: Moukey MAMP2 amplifier demonstrating wireless Bluetooth connectivity with a smartphone.
• AUX/RCA Input:

  Connect external audio sources such as DVD players, TVs, computers, or MP3 players to the "RIGHT AUDIO INPUT" and "LEFT AUDIO INPUT" RCA ports on the rear panel using an RCA cable. Switch the ampskifte til AUX-tilstand.

• USB-indgang:

  Insert a USB flash drive (maximum 32GB) containing music files (MP3, APE, WAV, WMA formats) into the USB port on the front panel. The ampLifieren skifter automatisk til USB-tilstand og begynder afspilning.

• FM-radio:

  Extend the FM antenna located on the rear of the amplifier for better reception. Switch the amplifier to FM mode using the "MODE" button. Use the remote control to scan for stations.

  

  Image: Illustration of the extendable FM antenna on the Moukey MAMP2 amplifier, highlighting its length.

Image: A comprehensive diagram illustrating the various input (BT, RCA) and output (speakers) connection modes for the Moukey MAMP2 amplivligere.

Betjeningsvejledning

Tænd/sluk

Rotate the "VOL/POWER" knob clockwise to turn the amplifier on. Rotate counter-clockwise until it clicks to turn off. The remote control also has an ON/OFF button.

Valg af tilstand

Press the "MODE" button on the front panel or the remote control to cycle through available input modes: Bluetooth (BT), FM Radio, USB, and AUX (RCA).

Volume, Treble, and Bass Control

• Bind: Adjust the main volume using the large "VOL/POWER" knob on the front panel or the Volume +/- buttons on the remote control.
• Diskant: Use the "TREBLE" knob on the front panel to adjust high-frequency sounds.
• Bas: Use the "BASS" knob on the front panel to adjust low-frequency sounds.

Fjernbetjeningsfunktioner

Den medfølgende infrarøde fjernbetjening giver nem adgang til forskellige funktioner:

Image: Detailed layout of the Moukey MAMP2 remote control, indicating the function of each button.

• TIL/FRA: Power on or off the amplivligere.
• KØRSELSVEJLEDNING: Switch between input modes (BT, FM, USB, AUX).
• CH-/CH+: In FM mode, navigate between radio stations.
• EQ: Adjust equalization presets (if available).
• Afspil/pause: Play or pause media playback (USB/Bluetooth modes).
• Forrige Næste: Skip to the previous or next track (USB/Bluetooth modes).
• Volumen +/-: Juster amplifiers volumen.
• Numeriske knapper (0-9): For direct track selection or FM frequency input (functionality may vary).

Opretholdelse

• Behold amplifier in a dry, well-ventilated area away from direct sunlight, heat sources, and moisture.
• Rengør enheden med en blød, tør klud. Brug ikke flydende rengøringsmidler eller aerosoler.
• Sørg for korrekt ventilation omkring enheden for at forhindre overophedning.
• Undgå at placere tunge genstande oven på amplivligere.

Fejlfinding

Problemer med Bluetooth-forbindelse

If Bluetooth is not working or the connection is unstable, try the following:

1. Sørg for amplifier is in Bluetooth mode (BT indicator light should be on). If not, press the "MODE" button to switch.
2. Turn on Bluetooth on your input device (e.g., mobile phone), search for "MAMP2", and click to connect. A beep indicates a successful connection (speakers must be connected).
3. Ensure there are no obstacles, especially metal objects, blocking the signal between your device and the amplivligere.
4. Sluk for amplifier, disconnect, and clear the connection from your Bluetooth transmitting device, then attempt to reconnect.

Connecting Two Devices via Bluetooth

The Moukey MAMP2 amplifier is designed to connect to one Bluetooth device at a time. Connecting two devices simultaneously will disrupt the audio stream. Disconnect the current device before connecting another.

Tilslutning til en Bluetooth-højttaler

MAMP2 amplifier is a Bluetooth receiver, not a transmitter. It cannot connect to a Bluetooth speaker. Bluetooth speakers already have their own internal amplifiers, and attempting to amplify them further with another amplifier may cause damage.

Connecting an External Bluetooth Receiver

If you wish to use an external Bluetooth receiver, connect its output end to an input port on the MAMP2 amplifier, such as the 3.5mm AUX port or the RCA AUDIO INPUT ports. Ensure you use the correct port interface converter if necessary.

Specifikationer

Billede: Moukey MAMP2 amplifier shown with its physical dimensions and a table detailing its technical specifications.

Garanti og support

Moukey products are designed for reliability and performance. For warranty information or technical support, please refer to the official Moukey webwebstedet eller kontakt deres kundeservice direkte. Gem din købskvittering til garantikrav.

For yderligere hjælp kan du besøge Moukey-butik på Amazon.