Reverie RC-WM-103 Adjustable Bed Remote Control Instruction Manual

Indledning

This manual provides essential instructions for the setup, operation, and maintenance of your Reverie RC-WM-103 Replacement Remote Control for adjustable bed bases. This remote is designed as an exact OEM replacement for Reverie 5i, 5D, 7S, R400, or 4M adjustable bed bases. Please review this manual thoroughly to ensure proper functionality and compatibility.

Important: Ensure your original remote matches the appearance of this remote exactly, including the logo, for guaranteed compatibility. This remote is not compatible with old Tempurpedic bases, even if buttons appear similar.

Sikkerhedsoplysninger

• Hold fjernbetjeningen væk fra vand og overdreven fugt.
• Udsæt ikke fjernbetjeningen for ekstreme temperaturer.
• Undgå at tabe fjernbetjeningen eller udsætte den for hårde stød.
• Opbevar batterier utilgængeligt for børn.
• Bortskaf gamle batterier ansvarligt i henhold til lokale regler.

Opsætning

1. Udpakning

Carefully remove the remote control from its packaging. Inspect for any visible damage. If damage is present, contact your retailer.

2. Batteriinstallation

Fjernbetjeningen kræver to AAA-batterier (medfølger ikke). Sådan installeres:

1. Find batteridækslet på bagsiden af ​​fjernbetjeningen.
2. Skub dækslet af i den retning, som pilen angiver.
3. Isæt to AAA-batterier, og sørg for at polerne (+ og -) vender korrekt som markeret inde i batterirummet.
4. Sæt batteridækslet på plads, indtil det klikker sikkert på plads.

3. Pairing/Syncing the Remote Control

To establish communication between your new remote and the adjustable bed base, follow these pairing instructions:

1. Sørg for, at sengebunden er tilsluttet en fungerende stikkontakt.
2. Locate the control box under your adjustable bed base. This box typically has a small button, often labeled "PAIR," "LEARN," or "SYNC." It might be recessed and require a pen tip to press.
3. Press and hold the pairing button on the control box for approximately 3 seconds. The indicator light on the control box should begin to flash.
4. Immediately after the light starts flashing, press and hold any button on your new remote control (e.g., "HEAD UP" or "FLAT") for 3-5 seconds.
5. Release the button on the remote. The indicator light on the control box should stop flashing, indicating successful pairing.
6. Test the remote by pressing various function buttons to ensure the bed base responds correctly.

Note: If pairing is unsuccessful, repeat the steps. Some older bed bases may require pressing the pairing button on the control box with a pen tip.

Betjening af fjernbetjeningen

The Reverie RC-WM-103 remote control provides intuitive control over your adjustable bed's functions. Refer to the image below for button layout and descriptions.

This image displays the Reverie RC-WM-103 remote control. On the left is the older black version, and on the right is the new gray OEM version, which is the replacement model. Both remotes feature buttons for head and foot adjustments, lift, massage, and preset positions.

Knap funktioner:

• HEAD UP/DOWN Arrows: Justerer sengens hoveddel opad eller nedad.
• FOOT UP/DOWN Arrows: Justerer sengens fodsektion opad eller nedad.
• LØFTE OP: Activates a quick lift function for the entire bed or a specific preset.
• FLAD: Vender sengen tilbage til en helt flad position.
• MASSAGE (HEAD/FOOT): Activates or adjusts massage functions for the head or foot sections.
• MASSAGE (WAVE/PULSE/STEADY): Controls different massage modes.
• FORUDINDSTILLINGSknapper (1, 2, 3): Recalls pre-programmed favorite positions.
• ZERO GRAVITY (if present): Elevates the head and foot to a position that mimics weightlessness, reducing pressure on the body.

Opretholdelse

Rensning:

Tør fjernbetjeningen af ​​med en blød, tør klud. Brug ikke flydende rengøringsmidler eller slibende materialer, da de kan beskadige overfladen eller de indvendige komponenter.

Udskiftning af batteri:

Replace batteries when the remote's response becomes sluggish or stops working. Always replace both batteries at the same time with new ones of the same type (AAA). Do not mix old and new batteries or different battery types.

Fejlfinding

Fjernbetjeningen reagerer ikke:

• Tjek batterier: Sørg for, at batterierne er korrekt installeret og ikke er afladede. Udskift dem om nødvendigt.
• Re-Pair Remote: Follow the "Pairing/Syncing the Remote Control" steps in the Setup section to re-establish connection.
• Strømforsyning: Verify that the adjustable bed base is properly plugged into a working power outlet.
• Forhindringer: Ensure there are no objects blocking the signal path between the remote and the bed base.

Bed Base Not Moving Smoothly:

• Tjek for forhindringer: Ensure no objects are under or around the bed base that could impede its movement.
• Power Cycle: Unplug the bed base from the power outlet for 30 seconds, then plug it back in.

If problems persist after attempting these troubleshooting steps, contact customer support.

Specifikationer

Garanti og support

For warranty information or technical assistance, please contact the retailer or manufacturer directly. Keep your purchase receipt as proof of purchase.

For yderligere hjælp kan du besøge Reverie Adjustable Bed Remotes store on Amazon or refer to the contact information provided with your original bed base documentation.