Valberg FRS-51 EL Brandsikkert pengeskab Brugermanual

1. Introduktion

This manual provides essential instructions for the proper installation, operation, and maintenance of your Valberg FRS-51 EL Fire Resistant Safe. Designed to protect valuables against fire, this safe features a robust construction and a dual digital and key locking mechanism. Please read this manual thoroughly before using the safe to ensure optimal performance and security.

2. Sikkerhedsoplysninger

• Always keep the safe keys in a secure location, separate from the safe itself.
• Do not store the safe keys inside the safe.
• Memorize your digital code and avoid writing it down in an easily discoverable location.
• Ensure the safe is securely anchored to prevent unauthorized removal or tipping.
• Hold børn væk fra pengeskabet og dets låsemekanismer.
• Do not attempt to force the safe open if the lock malfunctions. Contact customer support.

3. Pakkens indhold

Ved udpakning skal du kontrollere, at alle nedenstående varer er til stede:

• Valberg FRS-51 EL brandsikkert pengeskab
• Operating Keys (typically 2)
• Brugervejledning (dette dokument)
• Justerbar hylde (1)
• Bakke (1)
• Mounting Hardware (bolts for anchoring)

4. Produktet er slutview

The Valberg FRS-51 EL safe is engineered for fire resistance and security. Its construction features two inter-welded walls filled with fire-resistant concrete, providing LFS 60P fire protection. The door is secured by four solid metal locking bolts. It incorporates a dual locking system: a digital keypad for quick access and a traditional key lock for backup or primary use.

Image: Valberg FRS-51 EL Fire Resistant Safe with its door open, revealing an interior shelf and the digital keypad with an integrated key lock on the door. The safe's robust construction is visible.

4.1 Komponenter

• Digitalt tastatur: For electronic code entry.
• Nøgle lås: Primary or override lock.
• Håndtag: To open and close the safe door.
• Locking Bolts: Four solid metal bolts securing the door.
• Batterirum: Located on the inside of the door for the digital lock power.
• Justerbar hylde: For organizing contents.

5. Opsætning

5.1 Udpakning

1. Tag forsigtigt pengeskabet ud af emballagen.
2. Inspect the safe for any signs of damage. Report any damage to your supplier immediately.
3. Locate the keys and user manual, typically found taped to the safe or within a small package.

5.2 Forankring af pengeskabet

Anchoring the safe to the floor is highly recommended for enhanced security. The safe is designed with pre-drilled holes for this purpose.

1. Choose a suitable location, preferably a solid concrete floor.
2. Open the safe door and remove the shelf and tray to access the anchoring holes at the bottom.
3. Position the safe and mark the drilling points on the floor through the pre-drilled holes.
4. Move the safe aside and drill holes into the floor using an appropriate drill bit for your floor type and the provided mounting hardware.
5. Placer pengeskabet tilbage over de borede huller.
6. Secure the safe to the floor using the provided anchor bolts. Tighten firmly.

5.3 Initial Digital Lock Setup

Before first use, you must install batteries and set your personal digital code.

1. Open the safe using the emergency key (if provided) or the factory default code (refer to specific instructions on the safe or a separate card).
2. Locate the battery compartment on the inside of the door. Insert the required batteries (e.g., AA batteries, not included) according to polarity markings.
3. Press the internal reset button (usually a small red button or switch) located near the battery compartment. A beep will sound, and an indicator light will flash.
4. While the light is flashing, enter your desired personal code (typically 4-8 digits) on the keypad.
5. Press the '#' or 'ENTER' button to confirm. A confirmation beep will sound.
6. Test the new code with the safe door open before closing it.

6. Betjening af pengeskabet

6.1 Opening with Digital Lock

1. Enter your personal digital code on the keypad.
2. Press the '#' or 'ENTER' button.
3. If the code is correct, a green light will illuminate, and you will hear a beep.
4. Within a few seconds (usually 5-7 seconds), turn the handle clockwise to open the door.

6.2 Opening with Key Lock (Emergency/Override)

1. Insert the key into the keyhole on the digital keypad.
2. Drej nøglen med uret (eller som angivet) for at låse op.
3. Drej håndtaget med uret for at åbne døren.

6.3 Lukning og låsning af pengeskabet

1. Luk pengeskabslågen godt.
2. Turn the handle counter-clockwise until it is fully engaged and the door is secured. The locking bolts will extend.
3. If using the key lock, remove the key after locking.

6.4 Changing the Digital Code

1. Åbn pengeskabsdøren.
2. Press the internal reset button (usually a small red button or switch) located near the battery compartment. A beep will sound, and an indicator light will flash.
3. While the light is flashing, enter your new desired personal code (4-8 digits) on the keypad.
4. Press the '#' or 'ENTER' button to confirm. A confirmation beep will sound.
5. Test the new code with the safe door open before closing it.

6.5 Udskiftning af batteri

When the batteries are low, the digital keypad may emit a warning sound or an indicator light will flash during operation. Replace batteries promptly to avoid being locked out.

1. Åbn pengeskabsdøren.
2. Find batterirummet på indersiden af ​​døren.
3. Remove the cover and replace all old batteries with new ones of the same type (e.g., AA). Ensure correct polarity.
4. Luk batterirummets dæksel.
5. Test the digital lock with your code.

7. Vedligeholdelse

• Rensning: Tør ydersiden af ​​pengeskabet af med en blød, tør klud.amp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Låsemekanisme: Do not lubricate the digital keypad or key lock mechanism with oil or grease. If the key lock feels stiff, consult a professional locksmith.
• Batterikontrol: Periodically check the batteries (every 6-12 months) and replace them before they fully discharge to prevent potential lockouts.
• Dørpakning: Ensure the door seal is clean and free from debris to maintain fire resistance.

8. Fejlfinding

• Safe does not open with digital code:
  • Sørg for, at batterierne er friske og korrekt installeret.
  • Re-enter the code carefully.
  • Try using the override key.
• Tastaturet reagerer ikke:
  • Udskift batterierne.
  • Ensure no foreign objects are obstructing the buttons.
• Døren lukker ikke ordentligt:
  • Check for any obstructions inside the safe or around the door frame.
  • Ensure the handle is turned fully to engage the locking bolts.
• Forgotten Digital Code:
  • Use the override key to open the safe.
  • Reset the code following the instructions in Section 6.4.

9. Specifikationer

10. Garanti og support

The Valberg FRS-51 EL Fire Resistant Safe is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or contact your retailer for specific terms and conditions. For technical support, service, or inquiries regarding parts, please contact your authorized Valberg dealer or the customer service department of your place of purchase. Ensure you have your model number and purchase date available when contacting support.