JOYO Atmosphere R-14 Digital Reverb Pedal Instruction Manual

1. Introduktion

The JOYO Atmosphere R-14 is a versatile digital reverb pedal designed for electric guitars, offering a wide range of atmospheric effects. This pedal features 9 distinct digital reverb types, including SPRING, CHURCH, PLATE, EKO-VERB, SHIMMER, COMET, REWIND, FOREST, and PULSE. It provides comprehensive control over MIX, DECAY, and TONE, along with a dedicated MODULATION effects depth control. A unique "TRAIL" function allows the reverb tail to naturally fade out after disengaging the effect, ensuring smooth transitions.

2. Opsætning

Proper setup is crucial for optimal performance and to avoid unwanted noise. Follow these steps to connect your JOYO Atmosphere R-14 pedal:

1. Strømtilslutning: Connect a DC 9V power adapter (center negative, 140mA current consumption) to the DC 9V input jack on the pedal. For best results, use a JOYO original power adapter or a reliable alternative that meets the specified power requirements.
2. Instrumenttilslutning: Connect your electric guitar to the 'INPUT' jack on the pedal using a standard 1/4-inch mono instrument cable.
3. Amplifier tilslutning: Connect the 'OUTPUT' jack of the pedal to your amplifier's input using a standard 1/4-inch mono instrument cable.
4. Ensure Full Connection: Before playing, verify that all cables are securely connected between your guitar, the pedal, and the amplifier. The pedal supports mono cables only; stereo or balanced signals are not supported.

Figure 2.1: Proper connection of the JOYO Atmosphere R-14 pedal to guitar and amplifier, highlighting the DC 9V power input.

3. Kontrol og funktioner

The JOYO Atmosphere R-14 pedal offers intuitive controls for shaping your reverb sound:

• DECAY-knap: Controls the length of the reverb tail. Turn clockwise for longer decay, counter-clockwise for shorter decay.
• MIX-knap: Adjusts the blend between the dry (unaffected) and wet (reverb) signals. Turn clockwise for more reverb effect, counter-clockwise for less.
• TONE knap: Controls the brightness or darkness of the reverb. Turn clockwise for a brighter, more present reverb, counter-clockwise for a darker, warmer tone.
• MOD knap: Adjusts the depth of the modulation effect applied to the reverb. This control is specifically for reverb types that include modulation.
• TYPE Selector: A rotary switch to select one of the 9 digital reverb types: SPRING, CHURCH, PLATE, EKO-VERB, SHIMMER, COMET, REWIND, FOREST, and PULSE.
• TRAIL Switch (OFF/ON): Engages or disengages the "TRAIL" function. When ON, the reverb tail will naturally decay after the pedal is bypassed, creating a more seamless transition. When OFF, the reverb cuts off immediately upon bypass.
• LED Light Control Switch (SYNC/ALWAYS/OFF): This switch, located on the back of the pedal, controls the behavior of the LED ambient lights.
  • SYNC mode: All LEDs (side & top) synchronize with footswitch operation.
  • ALWAYS mode: Side LEDs remain continuously on, top LED operates with footswitch.
  • OFF -tilstand: Side LEDs remain deactivated, top LED operates with footswitch.

Figur 3.1: Overview of the JOYO Atmosphere R-14 pedal's controls and 9 digital reverb types.

Figure 3.2: The TRAIL function switch allows the reverb tail to fade out naturally after bypassing the effect.

Figure 3.3: The LED Light Control Switch on the back of the pedal adjusts the ambient lighting behavior.

4. Betjeningsvejledning

To operate your JOYO Atmosphere R-14 pedal, follow these general guidelines:

1. Tænd: Once connected, the pedal will power on automatically. The LED indicator will illuminate.
2. Select Reverb Type: Use the TYPE selector knob to choose your desired reverb algorithm (e.g., Spring, Church, Plate).
3. Adjust Reverb Parameters: Use the DECAY, MIX, TONE, and MOD knobs to fine-tune the selected reverb effect to your preference. Experiment with different settings to discover the full range of sounds.
4. Aktiver/omgå effekt: Press the footswitch to engage the reverb effect. The LED indicator will change color or state to show the effect is active. Press the footswitch again to bypass the effect.
5. Utilize TRAIL Function: If you desire a natural decay of the reverb tail after bypassing, set the TRAIL switch to 'ON'.

5. Specifikationer

6. Fejlfinding

If you encounter issues with your JOYO Atmosphere R-14 pedal, consider the following:

• Ingen lyd: Ensure all cables are securely connected. Check that your guitar, pedal, and amplifier are all powered on and their volume controls are appropriately set. Verify the pedal's power supply meets the DC 9V, center negative, 140mA requirements.
• Uønsket støj/brummen: This can often be caused by an incompatible or insufficient power supply. Use a high-quality, regulated 9V DC (center negative) power supply. Ensure all connections are tight and that you are using mono instrument cables.
• Effekt ikke engagerende: Check the footswitch for proper operation. Ensure the pedal is receiving power (LED should be on).
• Effect Too Weak/Strong: Adjust the MIX knob to control the blend of the effect. Also, check the DECAY, TONE, and MOD knobs to ensure they are not set to extreme positions that might diminish the perceived effect.

7. Garanti og support

JOYO TECHNOLOGY is committed to providing quality products and customer satisfaction. If you experience any product issues, please contact the seller directly through your order details. We are happy to assist with any concerns or questions regarding your JOYO Atmosphere R-14 pedal.