Indledning
This manual provides essential information for the proper use and maintenance of your Shure SLXD2 handheld transmitter with the SM58 vocal microphone capsule. The SLXD2 is designed for use with SLX-D Digital Wireless receivers, delivering transparent 24-bit digital audio and reliable RF performance.
Image: Shure SLXD2/SM58 Handheld Transmitter. This image displays the complete handheld transmitter unit, featuring the SM58 microphone capsule at the top, followed by the digital display and control buttons on the body, and the battery compartment at the base.
Hvad er der i æsken
The Shure SLXD2/SM58 package includes the following components:
- (1) SLXD2 Handheld Transmitter with SM58 Cardioid Dynamic Microphone Capsule
- (1) Zippered Bag
- (2) AA-batterier
Opsætning
1. Wireless Frequency Band Selection
Before operation, ensure the wireless frequency band of your SLXD2 transmitter matches that of your SLX-D receiver. Wireless frequency availability varies by region. Consult the Shure website's Wireless Frequency Finder for details specific to your location.
2. Batteriinstallation
- Unscrew the bottom cap of the handheld transmitter.
- Insert the two supplied AA batteries, observing correct polarity (+/-).
- Alternatively, install an optional Shure SB903 Lithium-ion rechargeable battery for extended features.
- Securely reattach the bottom cap.
3. Pairing with Receiver (IR Sync)
The SLXD2 transmitter must be paired with a compatible SLX-D receiver. This process typically involves an IR (Infrared) sync:
- Perform an RF Scan on your SLX-D receiver to find an open frequency.
- Align the IR windows of the transmitter and receiver.
- Initiate the IR Sync function on the receiver. The transmitter will automatically link to the selected frequency.
Betjeningsvejledning
Tænd/sluk
Press and hold the power button on the transmitter to turn it on or off. The OLED display will illuminate upon power-on.
Display og kontrol
The OLED display provides information such as frequency, battery status, and channel. Use the menu and enter buttons to navigate settings if required. Refer to the full SLX-D system manual for advanced configuration.
Batterilevetid
The transmitter operates for up to 8 hours using two AA batteries. When using the optional Shure SB903 Lithium-ion rechargeable battery, the display will show battery charge status in hours and minutes, along with health statistics.
Driftsområde
Oprethold en rækkevidde på op til 100 meter (330 fod) mellem sender og modtager for optimal ydeevne.
Lydkvalitet
The SLXD2/SM58 system delivers crystal-clear 24-bit / 48 kHz digital audio with an extended 20 Hz to 20 kHz frequency response (microphone dependent). It features a 120 dB dynamic range, suitable for vocals and various instruments.
Opretholdelse
- Rensning: Use a soft, dry cloth to clean the exterior of the transmitter. Avoid liquid cleaners or solvents.
- Batteripleje: Remove AA batteries if the unit will not be used for an extended period to prevent leakage. If using the SB903 rechargeable battery, follow its specific charging and storage guidelines.
- Opbevaring: Store the transmitter in its zippered bag in a cool, dry place away from extreme temperatures and humidity.
Fejlfinding
No Audio or Intermittent Signal
- Tjek batteri: Ensure batteries are correctly installed and have sufficient charge. Replace AA batteries or recharge the SB903.
- Frekvensmatch: Verify that the transmitter and receiver are tuned to the same frequency band and channel. Perform an IR Sync again if necessary.
- RF interferens: Scan for a clear frequency on the receiver and re-sync the transmitter. Avoid operating near other wireless devices or strong RF sources.
- Driftsområde: Ensure the transmitter is within the 330-foot (100-meter) operating range of the receiver.
Skærm fungerer ikke
- Power Cycle: Turn the transmitter off and then on again.
- Batterikontrol: A low battery can affect display functionality. Replace or recharge batteries.
For further assistance, consult the comprehensive SLX-D Digital Wireless System User Guide or contact Shure support.
Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnavn | SLXD2/SM58 |
| Mærke | Shure |
| Mikrofon formfaktor | Håndholdt |
| Polar mønster | Envejs (kardioid) |
| Forbindelsesteknologi | Infrarød (til synkronisering) |
| Signalformat | Digital |
| Frekvensrespons | 20 Hz til 20 kHz (afhængig af mikrofon) |
| Dynamisk rækkevidde | 120 dB |
| Audio Følsomhed | 120 decibel |
| Impedans | 150 Ohm |
| Driftsområde | 330 fod (100 meter) |
| Antal kanaler | 32 (per frequency band, region dependent) |
| Tuning båndbredde | 44 MHz (regionafhængig) |
| Strømkilde | Batteridrevet (2 AA-batterier medfølger) |
| Batterilevetid | Op til 8 timer (med AA-batterier) |
| Materiale | Metal (construction) |
| Varens vægt | 5.2 ounce |
| Produktmål (L x B x H) | 11.02 x 5.28 x 3.15 tommer |
Garantioplysninger
For detailed warranty information, please refer to the official Shure website or the warranty card included with your product. Shure products typically come with a limited warranty covering defects in materials and workmanship.
Støtte
If you require technical assistance or have questions regarding your Shure SLXD2/SM58 handheld transmitter, please visit the official Shure support website or contact their customer service department. Online resources often include FAQs, troubleshooting guides, and downloadable documentation.
Shure Official Webwebsted: www.shure.com
