COOSPO BC200 Trådløs GPS Cykelcomputer Brugermanual

1. Introduktion

This manual provides detailed instructions for the setup, operation, and maintenance of your COOSPO BC200 Wireless GPS Bike Computer. Please read this manual thoroughly before using the device to ensure optimal performance and longevity.

Image 1.1: The COOSPO BC200 Bike Computer displaying speed, distance, heart rate, cadence, power, altitude, temperature, and calories.

2. Produktet er slutview

2.1 Nøglefunktioner

• 2.6-inch anti-glare LCD screen with automatic backlight.
• Integrated GPS for accurate tracking.
• Bluetooth and ANT+ connectivity for external sensors.
• Over 70 customizable cycling data displays.
• IP67 vandtæt klassificering.
• Op til 36 timers batterilevetid.
• Support for CoospoRide App, Strava, and TrainingPeaks synchronization.
• Multi-sprog support.

2.2 Hvad er der i æsken

Bekræft at alle komponenter er til stede ved udpakning:

• 1 x COOSPO BC200 GPS Bike Computer
• 1 x USB Type-C opladningskabel
• 1 x skærmbeskytter
• 1 x Standard Bike Computer Mount
• 1 x Mount Adapter Base

Image 2.1: The complete package contents for the COOSPO BC200, including the device, charging cable, screen protector, and mounting accessories.

3. Opsætning

3.1 Indledende opladning

Before first use, fully charge the BC200 using the provided USB Type-C cable. A full charge takes approximately 1.5 hours and provides up to 36 hours of operation in GPS mode.

Image 3.1: The USB Type-C charging port located on the COOSPO BC200 device.

3.2 Montering af enheden

Attach the standard bike computer mount to your bicycle's handlebars or stem. Secure the BC200 onto the mount by aligning the tabs and twisting until it locks into place.

Image 3.2: The COOSPO BC200 securely mounted on a bicycle handlebar, displaying ride data.

3.3 Indledende konfiguration

Upon first power-on, you will be prompted to set basic parameters:

1. Sprog: Select your preferred language (English, Russian, German, Spanish, French, Portuguese, Turkish, etc.).
2. Tidszone: Adjust the time zone to your current location.
3. Enheder: Choose between metric (km/h, km) or imperial (mph, miles) units.
4. Hjulomkreds: Input your bicycle's wheel circumference for accurate speed and distance readings if not using GPS.

3.4 Parring af eksterne sensorer

The BC200 supports Bluetooth and ANT+ sensors such as heart rate monitors, cadence sensors, speed sensors, and power meters. To pair a sensor:

1. Sørg for, at sensoren er aktiv og inden for BC200's rækkevidde.
2. Navigate to the 'Sensor' menu on the BC200.
3. Vælg 'Tilføj sensor', og vælg den type sensor, du vil parre.
4. The BC200 will scan for available sensors. Select your sensor from the list to connect.

Image 3.3: The COOSPO BC200 demonstrating compatibility with various BLE/ANT+ sensors, including speed, cadence, heart rate, and power meters.

3.5 CoospoRide App Connection

The CoospoRide app allows for quick device settings adjustment, firmware updates, and data synchronization. Download the CoospoRide app from your smartphone's app store.

1. Aktiver Bluetooth på din smartphone.
2. Open the CoospoRide app and follow the on-screen instructions to add your BC200 device.
3. Once connected, you can customize display pages, update firmware, and sync ride data.

Image 3.4: Various screens from the CoospoRide application, showing device settings, data synchronization, and map views.

4. Betjeningsvejledning

4.1 Knapfunktioner

The BC200 features multiple buttons for navigation and control. Refer to the device's physical buttons for specific functions:

• Venstre knap: Power On/Off (long press), Backlight (short press).
• Midterste knap: Confirm selection, Start/Pause ride.
• Højre knap: Navigate menus, Lap function.

4.2 Display Customization

The BC200 allows you to customize up to 70+ data fields across multiple display pages. This can be done directly on the device or more conveniently via the CoospoRide app.

1. Access the 'Settings' menu on the BC200.
2. Select 'Display' or 'Data Fields' to configure each page.
3. Each page can display 2 to 9 types of data, such as speed, distance, heart rate, cadence, power, altitude, temperature, and calories.

Image 4.1: The COOSPO BC200 showcasing its ability to display over 70 different riding data points, including speed, distance, heart rate, and power.

4.3 Starting and Ending a Ride

1. Starte: Press the Middle Button to begin recording your ride. Ensure GPS signal is acquired for accurate tracking.
2. Pause: Press the Middle Button during a ride to pause recording.
3. Ende: Long press the Middle Button to end and save the ride.

4.4 Automatic Backlight

The BC200 features an automatic backlight that adjusts based on ambient light conditions, ensuring readability in both bright sunlight and low-light environments.

Image 4.2: The COOSPO BC200 display shown in both daytime (without backlight) and nighttime (with automatic backlight activated) conditions.

4.5 Datasynkronisering

After completing a ride, you can synchronize your data:

• Via CoospoRide App: Connect the BC200 to the CoospoRide app via Bluetooth. The app can then upload your ride data to platforms like Strava or TrainingPeaks.
• Via USB: Connect the BC200 to a computer using the USB cable. The device will appear as a mass storage device, allowing you to transfer ride files (e.g., .fit files) for manual upload to cycling platforms.

5. Vedligeholdelse

5.1 Rengøring

Tør enheden af ​​med en blød, damp cloth. Avoid using harsh chemicals or abrasive cleaners, as these can damage the screen or casing. Ensure the charging port cover is securely closed to maintain water resistance.

5.2 Pleje af batterier

For at forlænge batterilevetiden:

• Undgå at aflade batteriet helt ofte.
• Opbevar enheden på et køligt, tørt sted, når det ikke er i brug.
• Charge the device periodically if stored for extended periods.

5.3 Opbevaring

Store the BC200 in a dry environment, away from direct sunlight and extreme temperatures. Ensure it is clean before storage.

6. Fejlfinding

• Enheden tænder ikke: Ensure the device is fully charged. If the issue persists, try a soft reset by holding the power button for 10-15 seconds.
• Intet GPS-signal: Sørg for at du er i et åbent område med klar view of the sky. GPS acquisition may take longer in urban areas or under heavy tree cover.
• Sensors not pairing: Check that the sensor's battery is not depleted and that it is active. Ensure the sensor is compatible (Bluetooth or ANT+). Try restarting both the BC200 and the sensor.
• Data synkroniseres ikke med appen: Verify that Bluetooth is enabled on your phone and the BC200 is connected to the CoospoRide app. Check for app updates.
• Screen not readable: The automatic backlight should adjust. If not, check the backlight settings in the device menu. Ensure the screen is clean and free from smudges.

7. Specifikationer

8. Garanti og support

COOSPO provides technical support and assistance for its products. If you encounter any issues or have questions regarding your BC200 bike computer, please contact our customer service.

Vigtig bemærkning: If the back casing of the bike computer is accidentally broken, please contact us. We will provide free replacement parts and technical support.

For further assistance, visit the official COOSPO webwebstedet eller se de kontaktoplysninger, der blev oplyst ved dit køb.