Digi-Pas DWL280PRO

Brugermanual til Digi-Pas DWL280PRO digital torpedo-vaterpas

Model: DWL280PRO

Indledning

The Digi-Pas DWL280PRO is a 3rd-generation innovative digital torpedo level designed for professional use. It features a robust, waterproof (IP67) and shock-proof design, advanced LED display technology, and a magnetic V-groove base. This manual provides essential information for the proper setup, operation, and maintenance of your DWL280PRO digital level.

Two Digi-Pas DWL280PRO digital torpedo levels side-by-side, showing their bright LED displays and compact design.

Figure 1: Digi-Pas DWL280PRO Digital Torpedo Levels

This image shows two Digi-Pas DWL280PRO digital torpedo levels, highlighting their compact form factor and the clear, bright LED display. Each level features a traditional bubble vial alongside the digital readout, and is marked "WaterProof—IP67".

Opsætning

Installation af batteri

The DWL280PRO operates on standard batteries. To install or replace batteries:

  1. Locate the battery compartment cover, typically on the rear or side of the device.
  2. Brug en lille skruetrækker eller mønt til at åbne rummet.
  3. Indsæt nye batterier, og sørg for korrekt polaritet (+/-).
  4. Luk dækslet til batterirummet forsvarligt.

Første gang tændt

Tryk på tænd / sluk-knappen (red button with power symbol) to turn on the device. The LED display will illuminate, showing the current angle or slope.

Betjeningsvejledning

Grundlæggende måling

Place the base of the DWL280PRO firmly on the surface you wish to measure. The digital display will instantly show the angle relative to horizontal. For vertical measurements, the display will automatically invert when the gauge is upside down, ensuring readability.

A hand holding the Digi-Pas DWL280PRO digital level vertically against a metal shelving unit, showing the digital display reading 90.00 degrees.

Figure 2: Measuring a Vertical Surface

This image demonstrates the use of the Digi-Pas DWL280PRO digital level for vertical measurements. A hand holds the level against a metal shelving unit, utilizing its magnetic V-groove base to securely attach to the surface. The bright LED display clearly shows a 90.00-degree reading, indicating a perfectly vertical alignment.

Ændring af displayenheder

Tryk på UNIT button (blue button with two arrows) to cycle through different measurement units: degrees (°), slope (%), mm/M, and inch/FT.

Setting Reference Angle / Zero Function

To set a relative zero point, place the level on your desired reference surface and press the ZERO button (green gear icon). The display will show 0.00°, and subsequent measurements will be relative to this new zero.

Buzzer funktion

The DWL280PRO features an audible buzzer that sounds at 0° or any user-set angle, providing an auditory cue for precise alignment.

Close-up of the Digi-Pas DWL280PRO digital level's display, showing 0.00 degrees and a speaker icon indicating the buzzer function.

Figure 3: Buzzer Indication

Dette billede giver et nærbillede view of the Digi-Pas DWL280PRO's bright LED display, showing a reading of 0.00 degrees. A prominent speaker icon is overlaid, indicating the active buzzer function which provides an audible alert when the level reaches 0 degrees or a user-defined angle.

Opretholdelse

Rensning

Tør enheden af ​​med en blød, damp cloth. Do not use abrasive cleaners or solvents. The DWL280PRO is waterproof (IP67), allowing for cleaning under running water if necessary, but ensure the battery compartment is securely sealed.

The Digi-Pas DWL280PRO digital level partially submerged in water, with water splashing around it, demonstrating its waterproof capability.

Figur 4: Vandtæthed

This image vividly illustrates the waterproof capability of the Digi-Pas DWL280PRO digital level. The device is shown partially submerged in water, with splashes around it, confirming its IP67 rating and suitability for use in wet environments or for easy cleaning.

Opbevaring

Store the level in a dry place, away from extreme temperatures and direct sunlight, when not in use for extended periods.

Fejlfinding

Specifikationer

FeatureDetalje
MærkeDigi-Pas
ModelDWL280PRO
MaterialePC ABS
FarveMetallisk
DriftstilstandAutomatisk
Resolution (0° & 90°)±0.05°
Resolution (Other Angles)±0.2°
Driftstemperatur-4°F til 140°F (-20°C til 60°C)
Vandtæt vurderingIP67
FunktionerMagnetic V-groove base, Bright LED display, Auto-invert display, Buzzer
Digi-Pas DWL280PRO digital level in a snowy outdoor environment, with text indicating an operating temperature range of -20°C to 60°C.

Figure 5: Extreme Temperature Operation

This image shows the Digi-Pas DWL280PRO digital level in a snowy, cold outdoor setting, emphasizing its ability to operate in freezing temperatures. The graphic highlights an operating temperature range of -20°C to 60°C (-4°F to 140°F), showcasing its ruggedness for various environmental conditions.

A hand holding the Digi-Pas DWL280PRO digital level, with measurements indicating its dimensions: 2.4 inches (6 cm) in height.

Figur 6: Produktmål

This image provides a visual representation of the Digi-Pas DWL280PRO's dimensions, showing a hand holding the level. An overlay indicates a height of 2.4 inches (6 cm), giving a clear idea of its compact size.

Garanti og support

For warranty information and technical support, please refer to the official Digi-Pas webwebstedet eller kontakt deres kundeservice. Gem din købskvittering som købsbevis i tilfælde af garantikrav.

Visit the official Digi-Pas Store for more information: Digi-Pas Store on Amazon

Relaterede dokumenter - DWL280PRO

Preview Digi-Pas DWL-80Pro & DWL-80E Digital Level Brugervejledning
Omfattende brugermanual til Digi-Pas DWL-80Pro og DWL-80E digitale nivelleringsniveauer i lommestørrelse. Dækker enheden overview, tekniske specifikationer, kalibrering, rengøring, garanti og ansvar. Find detaljerede instruktioner til nøjagtig vinkelmåling.
Preview Digi-Pas DWL3000XY og DWL3500XY: Installations- og driftsvejledning
Omfattende installations- og betjeningsvejledning til Digi-Pas DWL3000XY og DWL3500XY 2-aksede højpræcisions digitale maskinistniveauer, der dækker enheden overview, tekniske specifikationer, driftsprocedurer, opbevaring, rengøring, garanti og kalibrering.
Preview Digi-Pas DWL-80Pro / DWL-80E Digitalt Nivå i Lommestørrelse Brugermanual
Brugermanual til Digi-Pas digitale niveauer i lommestørrelse (DWL-80Pro, DWL-80E) fra JSB Tech. Inkluderer enhed overview, tekniske specifikationer, kalibrering, rengøring, garanti og ansvarsoplysninger.
Preview Digi-Pas DWL-1500XY & DWL-1300XY: Brugermanual til 2-akset Smart præcisionsmaskinistvaterpas
Brugermanual til Digi-Pas DWL-1500XY og DWL-1300XY 2-aksede Smart Precision Machinist-niveauer. Dækker betjening, kalibrering, specifikationer og fejlfinding.
Preview Digi-Pas DWL-9000XY 2-akset ultrapræcisionshældningsmåler brugermanual
Omfattende brugermanual til Digi-Pas DWL-9000XY 2-akset ultrapræcisionshældningsmåler og vibrometer. Lær om specifikationer, opsætning, brugergrænseflade, funktioner, kalibrering, garanti og vedligeholdelse.
Preview Digi-Pas DWL-5500XY 2-akset præcisionssensormodul – hurtigstartguide
Lynvejledning til Digi-Pas DWL-5500XY 2-akset præcisionssensormodul, med detaljerede oplysninger om opsætning, tilslutninger, software, specifikationer og garanti.