Faultless Aged Bronze Electronic Deadbolt User Manual

Indledning

Thank you for choosing the Faultless Aged Bronze Electronic Deadbolt. This manual provides detailed instructions for the installation, operation, programming, and maintenance of your new electronic deadbolt. Please read this manual thoroughly before installation and use to ensure proper function and longevity of your product.

This electronic deadbolt offers enhanced security and convenience with its keypad entry system, allowing for keyless access. It features a durable aged bronze finish and is designed for residential use.

Sikkerhedsoplysninger

• Forsøg ikke at adskille eller ændre låsen. Dette kan forårsage skade på produktet og ugyldiggøre garantien.
• Brug kun den angivne batteritype (4 AA-batterier). Bland ikke gamle og nye batterier eller forskellige typer batterier.
• Keep all keys and access codes in a secure location to prevent unauthorized access.
• Avoid exposing the lock to extreme temperatures, direct sunlight, or excessive moisture.
• Ensure the door frame and door are properly aligned and in good condition before installation to prevent binding or malfunction.
• Dette produkt indeholder kemikalier, som staten Californien kender til at forårsage kræft og fødselsdefekter eller anden reproduktionsskade. Vask hænder efter håndtering.

Pakkens indhold

Kontroller venligst, at alle komponenter er til stede, før installationen påbegyndes:

• Electronic Deadbolt Exterior Assembly (Keypad)
• Electronic Deadbolt Interior Assembly (Thumb Turn)
• Deadbolt Latch Mechanism
• Monteringsplade
• Slagplade
• Monteringsskruer
• Taster (til manuel overstyring)
• Brugervejledning (dette dokument)

Bemærk: Der kræves 4 AA-batterier til drift og er ikke inkluderet i pakken.

Opsætning og installation

Before you begin, ensure your door is prepared for a standard deadbolt installation. You may need a Phillips head screwdriver and a measuring tape.

1. Installer låsemekanismen

1. Insert the deadbolt latch into the edge bore hole of the door. Ensure the "UP" arrow on the latch is pointing upwards.
2. Fastgør låsen med de medfølgende skruer.

2. Monter den udvendige enhed

1. Feed the cable and spindle through the center hole of the latch mechanism.
2. Align the exterior keypad assembly with the door and press it firmly against the door surface.

3. Installer monteringspladen

1. Route the cable from the exterior assembly through the rectangular hole in the mounting plate.
2. Secure the mounting plate to the exterior assembly using the long screws provided, ensuring the spindle passes through the center hole of the mounting plate.

4. Monter den indvendige samling

1. Tilslut kablet fra den udvendige enhed til porten på den indvendige enhed.
2. Align the interior assembly with the mounting plate, ensuring the spindle engages with the thumb turn mechanism.
3. Secure the interior assembly to the mounting plate using the short screws provided.

5. Installer batterier

1. Fjern batteridækslet på den indvendige del.
2. Insert 4 new AA alkaline batteries, observing the correct polarity (+/-).
3. Sæt batteridækslet på igen.

6. Install Strike Plate

1. Align the strike plate with the deadbolt hole on the door frame.
2. Secure the strike plate with the provided screws. Ensure the deadbolt extends smoothly into the strike plate when locked.

Billede: Forside view of the Faultless Aged Bronze Electronic Deadbolt, showing the keypad and keyhole.

Betjeningsvejledning

Låsning af døren

• Udefra: Press the "LOCK" button (if available, or a specific button for locking) or press any key for 2 seconds. The deadbolt will extend.
• Indefra: Rotate the thumb turn on the interior assembly to the horizontal position.

Oplåsning af døren

• From the outside (Keypad): Enter your valid User Code (or Master Code) followed by the "LOCK" button (or specific enter button). The deadbolt will retract.
• From the outside (Key): Insert the physical key into the keyhole and turn it to unlock.
• Indefra: Rotate the thumb turn on the interior assembly to the vertical position.

Billede: Vinklet view of the Faultless Aged Bronze Electronic Deadbolt, highlighting the keypad and finish.

Programmeringskoder

Your deadbolt supports one Master Code and up to 10 User Codes. The Master Code is used for programming and should be kept confidential. User Codes are for daily entry.

Setting the Master Code (First Time Setup)

The lock comes with a default programming code. You must change this to your unique Master Code immediately after installation.

1. Åbn batteridækslet på den indvendige del.
2. Press the "Program" button (usually a small button on the interior assembly). The keypad will illuminate.
3. Enter the default Master Code (refer to a sticker on the interior assembly or quick start guide, typically 123456).
4. Press the "LOCK" button.
5. Enter your new Master Code (4-10 digits).
6. Press the "LOCK" button again to confirm. A successful tone will sound.

Tilføjelse af brugerkoder

1. Tryk på knappen "Program".
2. Indtast din masterkode.
3. Press the "LOCK" button.
4. Enter a new User Code (4-10 digits).
5. Press the "LOCK" button again to confirm. A successful tone will sound.
6. Repeat for additional user codes (up to 10).

Sletning af brugerkoder

1. Tryk på knappen "Program".
2. Indtast din masterkode.
3. Press the "LOCK" button.
4. Indtast den brugerkode, du vil slette.
5. Press the "LOCK" button again. A successful tone will sound, and the code will be deleted.

Note: Individual user codes cannot be deleted. To remove a user code, you typically need to reset all user codes or overwrite them. Consult the specific instructions that came with your lock for advanced programming options.

Opretholdelse

• Udskiftning af batteri: When the batteries are low, the lock may emit a series of beeps or the keypad may not illuminate as brightly. Replace all 4 AA batteries promptly. Always use new, high-quality alkaline batteries.
• Rensning: Rengør låsens yderside med en blød, damp klud. Undgå slibende rengøringsmidler, opløsningsmidler eller kemiske spray, da disse kan beskadige overfladen og de elektroniske komponenter.
• Dørjustering: Periodically check that your door and frame are properly aligned. Misalignment can cause the deadbolt to bind, leading to excessive battery drain or malfunction.

Fejlfinding

Specifikationer

• Mærke: Overlager
• Modelnummer: GA7X7D01AA
• UPC: 050134988286
• Låsetype: Electronic Deadbolt with Keypad and Key Override
• Materiale: Bronze, Metal
• Slutte: Ældre bronze
• Dimensioner (L x B x H): 5.8 x 4.6 x 7.5 tommer
• Strømkilde: 4 AA batterier (medfølger ikke)
• Master Codes: 1
• Brugerkoder: Op til 10
• Forbindelsesprotokol: Wi-Fi (as per product specifications, though typical for smart locks, this is an electronic deadbolt)
• Controller type: Mechanical knob (for interior thumb turn)

Garanti og support

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact Overstock customer service directly. Keep your purchase receipt as proof of purchase for any warranty claims.

For further assistance, you may visit the Overstock website or contact their support line. Please have your model number (GA7X7D01AA) and UPC (050134988286) ready when contacting support.