Yaheetech Convertible Sleeper Sofa Instruction Manual

1. Vigtige sikkerhedsoplysninger

Læs venligst alle instruktioner omhyggeligt inden montering og brug. Gem denne manual til senere brug.

• Alt skum og alle polstrede overflader opfylder brandfarlighedsstandarderne.
• Hold sofaen væk fra åben ild eller høje varmekilder for at forhindre brandfare.
• Supervise children and pets around the sofa to avoid risks of entrapment or injury, especially during conversion.
• Ensure all components are securely fastened before use. Periodically check and tighten fasteners as needed.
• Overskrid ikke den maksimale vægtkapacitet på 350 kg.

2. Produktkomponenter

Før monteringen påbegyndes, skal du kontrollere, at alle dele er til stede og ubeskadigede. Hvis der mangler eller er beskadigede dele, bedes du kontakte kundesupport.

• Sofa Frame (main body)
• Metal Legs (6 pieces: 4 L-shaped, 2 T-shaped)
• Pillows (2 pieces)
• Samlebeslag (skruer, skruenøgle)

Image: Sofa legs are typically stored in a zippered compartment underneath the main sofa body for shipping.

3. Opsætning og montering

Assembly is required. It is recommended to have two people for easier assembly.

1. Udpak komponenter: Tag forsigtigt alle dele ud af emballagen. Læg dem på en ren, blød overflade for at undgå ridser.
2. Locate Legs: The metal legs are typically stored in a zippered compartment underneath the sofa frame. Unzip the compartment and retrieve all six legs.
3. Fastgør ben: Align each leg with the pre-drilled holes on the bottom of the sofa frame. Secure them using the provided screws and wrench. Ensure all legs are firmly attached. While some users report minor alignment issues with middle leg holes, applying gentle pressure with a drill can assist if needed.
4. Position Sofa: Carefully flip the sofa upright onto its newly attached legs.
5. Place Pillows: Arrange the two included pillows as desired.

Image: This diagram illustrates the key dimensions of the sofa in its various configurations, aiding in placement and understanding its size.

4. Betjeningsvejledning

The Yaheetech Convertible Sleeper Sofa features a versatile 3-position adjustable backrest, allowing it to function as a sofa, recliner, or bed.

Adjusting the Backrest (Click-Clack Mechanism):

1. Sådan låses op: Gently push the backrest forward until you hear a 'click'. This unlocks the current position.
2. For at justere: Slowly unfold the backrest backward to your desired angle. You will hear distinct 'clicks' as it locks into each of the three positions:
   • 105-degree angle: Standard upright sofa position.
   • 140-degree angle: Reclined position for relaxation.
   • 180-degree angle: Fully flat position, converting the sofa into a bed.
3. At låse: Release the backrest once it is in the desired position. It will automatically lock into place.

Image: The sofa shown in its three primary configurations: upright, reclined, and fully flat for sleeping.

5. Vedligeholdelse og pleje

Proper care will extend the life and appearance of your Yaheetech Sleeper Sofa.

Rengøringsvejledning:

• Rengøring af pletter: For spills or stains, spot clean immediately with a water-based detergent. Apply a small amount of detergent to a clean cloth and gently blot the affected area. Do not rub vigorously.
• Pudebetræk: The pillow covers can be removed and machine washed as needed. Refer to the care label on the pillow covers for specific washing instructions.
• Generel rengøring: Støvsug regelmæssigt sofaen med et polstringstilbehør for at fjerne støv og snavs.

Generel pleje:

• Undgå direkte sollys for at forhindre falmning af stoffet.
• Keep sharp objects away from the upholstery to prevent tears or snags.
• Periodically check all fasteners and tighten them if they become loose.

6. Fejlfinding

This section addresses common concerns that may arise during the use of your sofa.

• Issue: Difficulty aligning legs during assembly.
  Løsning: Ensure you are using the correct screws for each leg. If holes do not perfectly align, a power drill with appropriate bit can help guide screws into place. Do not overtighten.
• Issue: A hard spot or bump is felt in the middle when the sofa is flat (bed mode).
  Løsning: This can be due to the internal hinge mechanism. For enhanced comfort, consider using a foam mattress topper or an additional blanket when using the sofa in bed mode.
• Issue: Sofa feels too firm.
  Løsning: The sofa is designed with medium firmness. Over time, the foam will slightly soften with regular use. Adding throw blankets or decorative pillows can also enhance perceived softness.
• Issue: Backrest mechanism is stiff or not locking.
  Løsning: Ensure you are fully pushing the backrest forward to engage the 'click-clack' unlocking mechanism before attempting to recline or flatten. If the issue persists, check for any obstructions.

7. Specifikationer

Detailed technical specifications for the Yaheetech Convertible Sleeper Sofa.

Image: The sofa's adaptable design makes it suitable for various room environments, from living rooms to offices and bedrooms.

8. Garantioplysninger

This Yaheetech product comes with a limited warranty. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included with your purchase or contact Yaheetech customer support directly.

9. Kundesupport

If you have any questions, require assistance with assembly, or need to report a missing/damaged part, please contact Yaheetech customer support. You can find contact information on the product packaging or by visiting the official Yaheetech webwebsted.

For yderligere produktinformation og support, besøg Yaheetech-butik på Amazon.