Sure-Lites EBP500 1-Lamp Emergency Battery Pack Instruction Manual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of the Sure-Lites EBP500 1-Lamp Emergency Battery Pack. This unit is designed to provide emergency power to fluorescent lamps in the event of a power failure, ensuring illumination for safety and egress.

Læs venligst denne manual grundigt inden installation og brug for at sikre korrekt funktion og sikkerhed.

2. Vigtige sikkerhedsinstruktioner

Ved brug af elektrisk udstyr skal grundlæggende sikkerhedsforanstaltninger altid følges, herunder følgende:

ADVARSEL: For at forhindre høj voltage from being present on output leads prior to installation, do not connect battery connector until installation is complete and AC power is supplied to the unit.
FORSIGTIGHED: This unit requires an unswitched AC power source (120/277V AC, 60Hz). Ensure proper voltage leveres.
FORSIGTIGHED: For use in UL Listed indoor fixtures only. Do not use outdoors or in hazardous locations.
FORSIGTIGHED: This is a sealed, unitized battery. Replace entire unit when necessary.
Al service skal udføres af kvalificeret servicepersonale.
Må ikke monteres i nærheden af gas- eller elvarmere.
Udstyret bør monteres på steder og i højder, hvor det ikke let vil blive udsat for t.ampaf uautoriseret personale.
Brug af tilbehør, der ikke er anbefalet af producenten, kan forårsage en usikker tilstand.
Brug ikke dette udstyr til andet end det tilsigtede.

3. Produktkomponenter

The Sure-Lites EBP500 Emergency Battery Pack is a compact unit designed for integration into fluorescent lighting fixtures. Below is an image illustrating the key features of the device.

Sure-Lites EBP500 Emergency Battery Pack with wiring terminals and labels

Figur 1: Sure-Lites EBP500 Emergency Battery Pack. This image shows the elongated, rectangular battery pack with a metal casing. Visible labels include "EBP500 EMERGENCY BATTERY PACK", "120/240/277 VAC", "60Hz", "34W", "260mA", and a "UL LISTED" certification mark. Wiring terminals with color-coded connections (yellow, blue, red, black, white) are clearly visible at one end, along with a small connector for the test switch/indicator light.

Nøglekomponenter omfatter:

Batteri pakke: Sealed Ni-Cad battery system.
Ledningsklemmer: Color-coded for easy connection to the fixture's ballast and lamp.
Test Switch/Indicator Light Connector: For connecting the remote test switch and charge indicator light.
Input bindtage: Supports 120/240/277 VAC, 60Hz.

4. Opsætning og installation

Installation should only be performed by a qualified electrician in accordance with the National Electrical Code and local regulations.

4.1 Kontrol før installation

Ensure AC power to the fixture is turned OFF at the circuit breaker.
Verify that the fixture is suitable for emergency lighting applications and has adequate space for the EBP500 unit.
Bekræft input voltage of the fixture matches the EBP500 (120/240/277 VAC).

4.2 Ledningsinstruktioner

Refer to the wiring diagram provided with your fixture and the EBP500 unit for specific connections. General steps include:

Mount the EBP500 unit securely within the fixture or in an adjacent accessible location.
Disconnect the normal AC ballast from the lamp(s) as per the wiring diagram.
Connect the EBP500's input wires to the unswitched AC power source (Line and Neutral).
Connect the EBP500's output wires to the lamp(s) according to the diagram, ensuring proper polarity.
Connect the remote test switch and indicator light to the designated connector on the EBP500. Mount the test switch/indicator light in an accessible location on the fixture.
Once all wiring is complete, connect the battery connector to the EBP500 unit.

4.3 Indledende opladning

After installation, restore AC power to the fixture. The EBP500 requires a minimum of 24 hours of continuous AC power to fully charge the battery before it can provide its rated emergency duration.

5. Betjeningsvejledning

5.1 Normal drift

When AC power is present, the EBP500 unit is in standby mode, continuously charging its battery. The indicator light (if installed) will be illuminated, signifying that the battery is charging and ready for emergency operation.

5.2 Nøddrift

Upon interruption of normal AC power, the EBP500 automatically switches to emergency mode, providing power to the connected fluorescent lamp(s) for a minimum of 90 minutes. The indicator light will turn off during emergency operation.

5.3 Testing the Unit

To test the emergency function, press and hold the test switch. The connected lamp(s) should illuminate, and the indicator light should turn off. Release the test switch to return to normal operation. Regular testing is recommended as per local codes (e.g., monthly 30-second tests, annual 90-minute tests).

6. Vedligeholdelse

The EBP500 requires minimal maintenance. However, periodic checks are essential to ensure proper operation.

Månedlig test: Press the test switch for 30 seconds. The emergency lamp should operate.
Årlig test: Disconnect AC power to the unit for 90 minutes. The emergency lamp should remain illuminated for the entire duration.
Rensning: Keep the unit and fixture clean and free of dust. Use a dry cloth for cleaning.
Udskiftning af batteri: The EBP500 contains a sealed Ni-Cad battery. As stated on the unit, the entire unit should be replaced when the battery reaches the end of its service life or fails to hold a charge. Do not attempt to replace individual battery cells.
Bortskaffelse: Dispose of the unit in accordance with local regulations for Ni-Cad batteries. The unit is recyclable.

7. Fejlfinding

Problem	Mulig årsag	Løsning
Nødsituation lamp does not illuminate during test or power failure.	Ingen vekselstrøm til enheden. Batteri ikke fuldt opladet. Defekt lamp. Forkert ledningsføring. Battery pack failure.	Kontroller afbryderen og ledningsforbindelserne. Allow 24 hours for initial charge. Udskift lamp. Bekræft ledningsføringen i forhold til diagrammet. Replace the entire EBP500 unit.
Indicator light is off during normal AC power.	Ingen vekselstrøm til enheden. Indicator light or wiring faulty. Battery pack failure.	Kontroller vekselstrømforsyningen. Check indicator light connections. Replace the entire EBP500 unit.
Nødsituation lamp duration is less than 90 minutes.	Batteri ikke fuldt opladet. Battery pack nearing end of life.	Ensure 24-hour charge time. Replace the entire EBP500 unit.

Hvis fejlfindingstrinene ikke løser problemet, skal du kontakte kvalificeret servicepersonale.

8. Specifikationer

Model: EBP500
Input bindtage: 120/277 VAC, 60 Hz
Batteritype: Sealed Ni-Cad
Batteri Voltage: 4.8V
Batterikapacitet: 2 AH
Opladningstid: 24 timer (minimum)
Emergency Operation Time: 90 minutes (minimum)
Maksimal udladning: 0.27A ved 120V, 0.25A ved 277V
Etui materiale: Stål (legeret stål)
Monteringstype: Væg
Kompatibel Lamp Typer: T5/T5HO/T8/T12/CFL 2G11/Circular T9/T8/U-
Certificeringer: UL-listet
Genanvendelighed: Genopladelig

9. Garanti og support

For warranty information or technical support, please contact Sure-Lites customer service. Refer to the product packaging or the Sure-Lites official website for contact details. Please have your model number (EBP500) and purchase date available when contacting support.

This product is designed for long-term reliability when installed and maintained correctly. Adherence to the instructions in this manual will help ensure optimal performance.

	Sure-Lites EBPLEDL6SF Emergency LED Driver - Product Specifications and Data Detailed specifications, features, and installation data for the Sure-Lites EBPLEDL6SF Emergency LED Driver by Cooper Lighting Solutions. Includes product overview, technical data, certifications, and dimensional drawings.
	Sure-Lites EBP1400NCX/NCF Emergency Ballast Installation Manual Comprehensive installation, operation, and maintenance guide for Sure-Lites EBP1400NCX and EBP1400NCF emergency ballasts, detailing safety precautions, wiring diagrams, and lamp kompatibilitet.
	Sure-Lites EBPLED Emergency Battery Packs: 7W & 14W LED Emergency Lighting Datasheet for Sure-Lites EBPLED series LED emergency battery packs. Features 90-minute run time, constant wattage output, LiFePO4 battery, and UL 924 compliance for 7W and 14W models, suitable for various commercial applications.
	Sure-Lites APEL-seriens nødbelysningsarmatur Udforsk Sure-Lites APEL-serien af nødbelysning, der er UL 924-godkendt, har 90 minutters driftstid, justerbare LED-hoveder og et holdbart nikkel-cadmium-batteri. Ideel til pålidelig nødudgang med fjernbetjeningskapacitet.
	Sure-Lites EBPLEDL6SF Emergency LED Driver - Technical Specifications and Features Detailed technical specifications, features, and application information for the Sure-Lites EBPLEDL6SF Emergency LED Driver by Cooper Lighting Solutions. Includes product overview, certifications, dimensions, and warranty.
	Sure-Lites FirstLink Connected Emergency Lighting System \| Cooper Lighting Solutions Explore the Sure-Lites FirstLink connected emergency lighting system from Cooper Lighting Solutions. This brochure details system features, hardware, app control, and service plans designed for building safety and code compliance.