Indledning
Thank you for choosing the Brondell Swash LE99 Electric Bidet Toilet Seat. This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your new bidet seat. Please read this manual thoroughly before installation and keep it for future reference.
Vigtige sikkerhedsoplysninger
Always follow basic safety precautions when using electrical products, especially when children are present. To reduce the risk of electrocution, burns, fire, or injury, ensure proper grounding and avoid using near water. Disconnect from power before cleaning or servicing. Do not operate with a damaged cord or plug. Refer to the full safety precautions in the included owner's manual.
Produktegenskaber
The Brondell Swash LE99 offers a range of advanced features for enhanced hygiene and comfort:
- Vask med varmt vand: Advanced hybrid heating technology provides an extended warm water cycle with adjustable temperature.
- Varmlufttørrer: Offers an added touch of luxury for a complete cleaning experience.
- Opvarmet toiletsæde: Justerbar sædetemperatur for komfort.
- Stainless-Steel Nozzle: Self-cleaning, 5-position adjustable nozzle for front and rear washes.
- Flere vasketilstande: Includes Strong Wash Mode, Soft Wash Mode, pulsing, and oscillating spray options.
- Lite-Touch Remote Control: Intuitive wireless remote for easy operation and customization.
- Programmable User Settings: Save preferred settings for up to two users.
- Natlys: Gentle-glow LED nightlight for visibility in the dark.
Opsætning og installation
Proper installation is crucial for the optimal performance of your bidet seat. Follow these steps carefully.
1. Trin før installation
- Fjern eksisterende toiletsæde: Carefully detach your current toilet seat and thoroughly clean the toilet bowl and surrounding area.
- Sluk for vandforsyningen: Locate the shutoff valve on the wall behind your toilet and turn it clockwise to stop the water flow.
- Skyl toilet: Hold down the flush handle until the toilet tank is completely drained of water.
- Disconnect Water Line: Unscrew the flexible water supply line from the fill valve beneath the toilet tank. Have a small bucket or towel ready to catch any residual water.
2. Installing the T-Valve
- Insert Rubber Washer: Place the provided rubber washer into the T-valve, ensuring the raised lip faces upwards.
- Tilslut T-ventil: Connect the T-valve to the fill valve located under the toilet tank.
- Reconnect Supply Line: Reconnect the flexible water supply line to the bottom of the T-valve.
3. Mounting the Bidet Seat
- Place Mounting Plate: Position the mounting plate over the bolt holes on your toilet, with the arrow pointing towards the toilet tank.
- Insert Brackets and Bolts: Place the adjustable brackets inside the mounting plate, aligning them with the toilet seat bolt holes. Slide the mounting bolts through the mounting plate and the holes in the toilet.
- Sikre bolte: Secure the bolts with the provided washers and nuts. Keep them loose enough to allow for seat position adjustment later.
- Position Swash Seat: Place your Swash bidet seat flat onto the toilet, in front of the mounting plate.
- Skub på plads: Slide the bidet seat towards the tank onto the mounting plate until it clicks securely into place.
- Juster og stram: Adjust the seat position for the best fit, then tighten the nuts under the toilet to secure it.
4. Elektrisk tilslutning
- Tænd for vandforsyning: Slowly turn on the water supply at the shutoff valve and check for any leaks.
- Tilslut: If there are no leaks, plug the Swash bidet seat into the nearest Ground Fault Circuit Interrupter (GFCI) outlet. The bidet will immediately power on, and the nozzle will extend and retract as part of its self-test.
5. Fit Guide
Ensure your toilet is compatible with the elongated Brondell Swash LE99. Measure your toilet bowl according to the diagram below:
- Længde (A): 18"-19.5" (45.7 cm - 49.5 cm) from bolt holes to front of toilet bowl.
- Distance to Tank (B): Minimum 1.5" (3.81 cm) from center of bolt holes to toilet tank.
- Bolt Hole Spacing (C): 5.25"-7.45" (13.3 cm - 20.3 cm) between bolt holes.
Betjeningsvejledning
The Brondell Swash LE99 is operated via its intuitive wireless remote control. Ensure the seat sensor is engaged (you must be seated on the bidet) for functionality.
Fjernbetjeningsfunktioner
- Bagvask: Activates the standard rear cleansing.
- Forvask: Activates the feminine cleansing.
- Stærk vask: Increases water pressure for a more powerful wash.
- Tørre: Aktiverer varmlufttørreren.
- Dyseposition: Adjusts the nozzle's forward or backward position.
- Water Pressure/Dry Temp: Adjusts water pressure and air dryer temperature.
- Vandtemperatur: Adjusts the water temperature (cold, medium, hot).
- Sædetemperatur: Justerer temperaturen på det opvarmede sæde.
- Puls: Provides a pulsating water spray.
- Mild: Reduces water pressure for a softer wash.
- Rengøring af dyse: Initiates a self-cleaning cycle for the nozzle.
- Øko-tilstand: Aktiverer energisparetilstand.
- Bruger 1/Bruger 2: Giver mulighed for at gemme og genkalde personlige indstillinger for to forskellige brugere.
- Stop: Halts all current bidet functions.
Opretholdelse
Regular cleaning and maintenance will ensure the longevity and hygienic performance of your Brondell Swash LE99.
1. Dyserengøring
The stainless-steel nozzle features a self-cleaning function. Press the 'Nozzle Cleaning' button on the remote to activate this cycle. For manual cleaning, gently pull out the nozzle and wipe it with a soft cloth and mild, non-abrasive cleaner.
2. Generel rengøring
- Always unplug the bidet seat from the electrical outlet before cleaning.
- Wipe the exterior surfaces of the bidet seat with a soft, damp cloth and a mild, non-abrasive household cleaner.
- Avoid using harsh chemicals, abrasive cleaners, or scrub brushes, as these can damage the finish.
- Do not spray water directly onto the bidet seat, especially near electrical components.
Fejlfinding
If you experience issues with your Brondell Swash LE99, refer to the following common troubleshooting tips. For more detailed solutions, consult the full owner's manual.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| No power/No functions | Not plugged in, GFCI tripped, power outage. | Ensure plug is secure, reset GFCI, check household power. |
| Ingen vandspray | Water supply valve closed, seat sensor not engaged, water filter clogged. | Open water supply valve, ensure you are seated, check/replace water filter. |
| Water not warm | Water temperature setting too low, Eco Mode active. | Adjust water temperature setting, deactivate Eco Mode. |
| Fjernbetjeningen svarer ikke | Batteries low/dead, obstruction between remote and bidet. | Replace batteries, ensure clear line of sight. |
Specifikationer
- Modelnummer: LE99-EW
- Farve: White Warm air dryer + Remote Control
- Mærke: Brondell
- Materiale: Stainless Steel (nozzle)
- Stil: Forlænget
- Form: Oval
- Produktdimensioner: 20.79 cm L x 15.98 cm B x 5.7 cm H
- Varens vægt: 11.46 pund
- UPC: 819911014200
- Strømkilde: Electric (requires GFCI outlet)
- Inkluderede komponenter: AAA Batteries (4), Adjustable Brackets (2), Bidet Hose, Bidet Seat, Flat Washer (2), Mounting Bolt (2), Mounting Plate, Nuts (2), Remote Control, Remote Control Wall Mount, Rubber Cone Washer (2), T-Valve Connector with Rubber Washer
Garanti og support
The Brondell Swash LE99 Bidet Toilet Seat typically comes with a 1-year limited warranty covering manufacturing defects. For specific warranty details, product support, or to contact customer service, please refer to the official Brondell webwebstedet eller garantikortet, der følger med dit produkt.
Visit the Brondell Store: Brondell Official Store
