1. Introduktion
This manual provides comprehensive instructions for the CAME 3199ZL65 electronic control board, designed specifically for 24V CAME gate motors. It covers essential information regarding installation, operation, maintenance, and troubleshooting to ensure safe and efficient use of your gate automation system.
The CAME 3199ZL65 is an original replacement part, ensuring full compatibility and optimal performance with your existing CAME system.
2. Vigtige sikkerhedsoplysninger
Please read and understand all safety instructions before proceeding with installation or operation. Failure to follow these instructions may result in serious injury or damage to property.
- Afbryd strømmen: Always disconnect the main power supply to the control board and motor before performing any installation, maintenance, or troubleshooting.
- Kvalificeret personale: Installation and electrical connections must be performed by qualified and experienced personnel in accordance with all local electrical codes and regulations.
- Miljøbeskyttelse: Protect the control board from moisture, dust, and extreme temperatures. Install it in a suitable, weather-resistant enclosure.
- Bevægelige dele: Keep hands, feet, and clothing clear of moving gate parts during operation.
- Børn og kæledyr: Do not allow children or pets to play near the gate or control devices.
- Nødstop: Ensure an easily accessible emergency stop mechanism is in place and functional.
3. Produktet er slutview
The CAME 3199ZL65 is a sophisticated electronic board designed to manage the operation of 24V CAME gate motors. It integrates various control and safety features, allowing for precise and reliable gate automation.
Image 1: The CAME 3199ZL65 electronic control board, showing various components, connectors, and relays.
4. Opsætning og installation
4.1 Kontrol før installation
- Verify that the existing power supply is 24V DC and stable.
- Confirm compatibility with your specific CAME 24V gate motor model.
- Ensure adequate space within the protective enclosure for mounting the board and making connections.
4.2 Mounting the Control Board
Securely mount the CAME 3199ZL65 board within a suitable, weather-resistant enclosure. Ensure it is protected from direct sunlight, moisture, and excessive vibrations. Use appropriate fasteners to prevent movement.
4.3 Elektriske forbindelser
All electrical connections must be made with the main power supply disconnected. Refer to the wiring diagram provided with your specific gate motor and the CAME 3199ZL65 board for precise terminal identification.
4.3.1 Strømforsyningstilslutning
Connect the 24V DC power supply to the designated power input terminals on the control board. Carefully observe polarity (+ and -) to prevent damage.
4.3.2 Motorforbindelser
Connect the 24V gate motor(s) to the motor output terminals. For dual gate systems, ensure correct wiring for each motor (e.g., master/slave configuration if applicable).
4.3.3 Safety Device Connections
Connect all safety devices, such as photocells, safety edges, and emergency stop buttons, to their respective input terminals. Ensure proper alignment and functionality of photocells to prevent accidental gate closure.
4.3.4 Control Device Connections
Connect remote control receivers, wired push buttons, keypads, or other access control devices to the designated command input terminals.
4.4 Indledende konfiguration
After all connections are made and verified, restore power to the board. The initial configuration typically involves:
- Justering af grænsekontakt: Set the open and close limit switches to define the gate's travel limits accurately.
- Operating Logic Selection: Configure the desired operating logic (e.g., automatic closing time, step-by-step operation, pedestrian opening).
- Force Adjustment: Adjust the motor force settings to ensure safe and efficient operation, preventing excessive force on obstructions.
- Programmering af fjernbetjening: Program any remote controls to the receiver connected to the board.
5. Betjeningsvejledning
5.1 Grundlæggende betjening
Once installed and configured, the gate can be operated using your programmed remote control or a wired push button. A single press typically initiates an open or close cycle, or stops the gate mid-movement, depending on the configured operating logic.
5.2 Manuel udløsning
In the event of a power failure or system malfunction, your gate motor should have a manual release mechanism. Refer to your specific gate motor's manual for instructions on how to manually disengage the motor and operate the gate by hand.
6. Vedligeholdelse
Regular maintenance helps ensure the longevity and reliable operation of your CAME 3199ZL65 control board and gate system.
- Renhed: Periodically inspect the control board for dust, debris, or insect nests. Clean gently with a soft, dry brush or compressed air.
- Ledningsinspektion: Annually check all electrical connections for tightness and signs of wear or corrosion. Repair or replace any damaged wiring immediately.
- Sikkerhedsanordninger: Regularly test all safety devices (e.g., photocells, safety edges) to ensure they are functioning correctly.
- Manuel udgivelse: Test the gate's manual release mechanism periodically to ensure it operates smoothly.
7. Fejlfinding
This section addresses common issues you might encounter with your CAME 3199ZL65 control board. Always disconnect power before inspecting internal components.
7.1 Gate Not Responding
- Tjek strøm: Ensure the control board is receiving power. Look for indicator lights on the board.
- Fjernbetjenings batteri: Replace the battery in your remote control.
- Sikkerhedsanordninger: Verify that photocells are aligned and clear of obstructions. A triggered safety device will prevent gate operation.
- Nødstop: Ensure the emergency stop button (if installed) is not activated.
7.2 Gate Stops Mid-Cycle
- Forhindringer: Kontrollér for eventuelle fysiske forhindringer i portens bane.
- Safety Device Activation: A safety device may have been triggered. Inspect photocells and safety edges.
- Motoroverbelastning: The motor may be overheating or encountering excessive resistance. Allow it to cool down and check for mechanical issues with the gate.
7.3 Fjernbetjening virker ikke
- Batteri: Udskift fjernbetjeningens batteri.
- Programmering: Re-program the remote control to the receiver. Refer to the remote control's specific instructions.
- Modtagerforbindelse: Ensure the remote control receiver is correctly connected to the control board.
If issues persist after troubleshooting, contact a qualified technician or CAME customer support.
8. Tekniske specifikationer
- Mærke: Kom
- Model: 3199ZL65
- Type: Elektronisk kontrolkort
- Operation Voltage: 24V DC
- Kompatibilitet: Designed for CAME 24V gate motors
- ASIN: B084SY7S3P
- Fabrikant: Kom
- Tilgængelighed: Original replacement part
9. Garanti og support
Warranty information for the CAME 3199ZL65 electronic control board is typically provided with the product at the time of purchase. For specific warranty details, terms, and conditions, please refer to the documentation included with your product or contact your authorized CAME dealer.
For technical support, spare parts, or further assistance, please visit the Came official webwebsted or contact their customer service department directly. When contacting support, please have your product model (3199ZL65) and any relevant purchase information ready.
