KOAMTAC KDC180 Wearable Barcode Scanner User Manual

Indledning

This manual provides comprehensive instructions for the setup, operation, maintenance, and troubleshooting of your KOAMTAC KDC180 Wearable Barcode Scanner. The KDC180 is a compact and lightweight barcode scanner designed for efficient data collection, featuring a double ring trigger for comfortable and hands-free operation. It connects via Bluetooth to compatible devices such as laptops and desktops.

Image: The KOAMTAC KDC180 Wearable Barcode Scanner, showing its compact design with a black body and a prominent green trigger button. The device is attached to a black adjustable strap, indicating its wearable nature. The top surface features connection points for integration with other components.

Opsætning

1. Udpakning og indledende inspektion

• Carefully remove the KDC180 scanner from its packaging.
• Undersøg enheden for synlige skader.
• Sørg for, at alle komponenter, der er angivet i emballagen, er til stede.

2. Opladning af enheden

The KDC180 is powered by a battery. Before first use, fully charge the device.

• Connect the charging cable to the KDC180 and a compatible power source.
• Opladningsindikatorlampen lyser.
• Allow the device to charge until the indicator shows a full charge.

3. Wearing the Scanner

The KDC180 is designed to be worn for hands-free operation.

• Adjust the double ring trigger strap to fit comfortably on your finger.
• Ensure the scanner module is securely attached to the ring trigger.
• The scanner should be positioned to allow for easy aiming at barcodes.

Betjeningsvejledning

1. Tænd/sluk

• To power on: Press and hold the power button until the device vibrates and/or an indicator light appears.
• To power off: Press and hold the power button until the device vibrates and/or the indicator light turns off.

2. Bluetooth-parring

The KDC180 connects to compatible devices (Laptop, Desktop) via Bluetooth.

1. Ensure the KDC180 is powered on and in pairing mode (refer to device indicator lights for status).
2. On your host device (laptop/desktop), navigate to Bluetooth settings.
3. Søg efter available devices and select "KDC180" from the list.
4. Følg eventuelle anvisninger på skærmen for at fuldføre parringsprocessen.
5. A successful connection will be indicated by a specific light pattern or sound from the KDC180.

3. Scanning af stregkoder

• Aim the scanner's light beam at the barcode you wish to scan.
• Press the trigger button on the double ring.
• A successful scan will typically be indicated by a beep or vibration.
• The scanned data will be transmitted to your paired device.

Opretholdelse

1. Rengøring af enheden

• Use a soft, dry, lint-free cloth to wipe the exterior of the scanner.
• Til genstridigt snavs, let dampda kluden med vand eller et mildt, ikke-slibende rengøringsmiddel.
• Brug ikke skrappe kemikalier, opløsningsmidler eller slibende materialer.
• Sørg for, at der ikke kommer væske ind i enhedens åbninger.

2. Batteripleje

• Undgå at aflade batteriet helt ofte.
• Opbevar enheden et køligt og tørt sted, når den ikke er i brug i længere perioder.
• Udsæt ikke enheden for ekstreme temperaturer.

3. Opbevaring

When storing the KDC180, ensure it is powered off and kept in a safe environment, away from direct sunlight, moisture, and extreme temperatures. The maximum storage temperature is 140 Degrees Fahrenheit (60 Degrees Celsius).

Fejlfinding

1. Enheden tændes ikke

• Check battery level: Ensure the device is fully charged.
• Verify power button: Press and hold the power button firmly for a few seconds.

2. Kan ikke parres via Bluetooth

• Ensure KDC180 is in pairing mode.
• Check Bluetooth on host device: Make sure Bluetooth is enabled and discoverable.
• Restart both devices: Power off and on both the KDC180 and the host device.
• Clear previous pairings: If issues persist, remove any existing KDC180 pairings from your host device's Bluetooth settings and attempt to pair again.

3. Stregkoder scannes ikke

• Check scanner window: Ensure the scanner window is clean and free of obstructions.
• Barcode quality: Verify the barcode is not damaged, smudged, or poorly printed.
• Distance and angle: Adjust the distance and angle of the scanner to the barcode.
• Lighting conditions: Ensure adequate lighting, but avoid direct glare.

Specifikationer

Garantioplysninger

For detailed warranty information regarding your KOAMTAC KDC180, please refer to the official KOAMTAC website or contact KOAMTAC customer support directly. Warranty terms and conditions may vary by region and purchase date.

Støtte

If you require further assistance or have questions not covered in this manual, please contact KOAMTAC customer support:

• Fabrikant: KOAMTAC, INC.
• Webwebsted: www.koamtac.com (Besøg venligst den officielle webwebsted for de mest opdaterede kontaktoplysninger og supportressourcer.)
• Sælger: KOAMTAC KDC (via Amazon)