Produkt overview
The Azur Z12 Wireless Bike Computer is designed to provide essential cycling data for recreational riders. It features a large, easy-to-read display and a slim, tool-free mounting design. This manual provides instructions for setup, operation, and maintenance of your Azur Z12.
Nøglefunktioner
- Wireless connectivity for clean installation.
- 12 essential cycling functions.
- Slim and compact design.
- Brugervenlig grænseflade.
- Stort, tydeligt display for nem læsning.
- Værktøjsfrit monteringssystem.
Opsætning
1. Batteriinstallation
The Azur Z12 requires a battery for operation. Note: A battery is included with your purchase.
- Find batterirummet på bagsiden af computerenheden.
- Åbn dækslet til rummet.
- Isæt batteriet, og sørg for at polariteten vender korrekt.
- Luk batterirummet forsvarligt.
2. Montering af computer og sensor
The Azur Z12 features a tool-free mounting system for quick and easy installation.
- Attach the computer mount to your bicycle's handlebar or stem using the provided straps or zip ties. Ensure it is securely fastened and positioned for easy viewing.
- Mount the wireless speed sensor to the front fork of your bicycle.
- Attach the magnet to a spoke on your front wheel. Position the magnet so it passes within 5mm of the sensor as the wheel rotates.
- Slide the Azur Z12 computer unit onto the mount until it clicks into place.
3. Indledende konfiguration
After installation, configure the computer for accurate readings.
- Enhedsvalg: Tryk på MODE button (or equivalent, assuming standard bike computer buttons) to cycle through settings. Select your preferred unit of measurement (e.g., km/h or mph).
- Wheel Circumference Input: This is crucial for accurate speed and distance measurements. Refer to your bicycle tire's sidewall for its size (e.g., 700x23c, 26x1.95) and consult a wheel circumference chart (available online or in a more detailed manual) to find the corresponding value in millimeters. Enter this value into the computer.
- Indstilling af ur: Indstil det aktuelle klokkeslæt, og vælg mellem 12-timers eller 24-timers format.
Operating Your Azur Z12
Display Modes and Functions
The Azur Z12 cycles through various data displays. Use the MODE button (typically the left button) to switch between functions.
- Aktuel hastighed: Viser din hastighed i realtid.
- Gennemsnitshastighed: Shows the average speed of your current ride.
- Maksimal hastighed: Records the highest speed achieved during your current ride.
- Odometer (TOTAL): Displays the total accumulated distance. This value is typically stored even when the battery is removed.
- Rejseafstand (DST): Shows the distance covered in the current ride. This can be reset.
- Køretid: Sporer varigheden af din aktuelle tur.
- 12/24 timers ur: Viser det aktuelle klokkeslæt.
Yderligere funktioner
- Automatisk scanning: The computer may automatically cycle through different display modes.
- Automatisk tænd/sluk: The computer automatically turns on when motion is detected and turns off after a period of inactivity to conserve battery.
- Indikator for lavt batteri: An icon will appear on the display when the battery level is low, indicating it's time for replacement.
Nulstilling af rejsedata
To reset trip-specific data (Trip Distance, Ride Time, Average Speed, Maximum Speed), typically press and hold the NULSTIL button (or equivalent, often the right button) for a few seconds while in the relevant display mode. Refer to the specific button layout on your device.
Opretholdelse
- Rensning: Tør computeren og sensoren af med en blød kludamp cloth. Do not use abrasive cleaners or solvents. Ensure the unit is dry before storage or use.
- Udskiftning af batteri: When the low battery indicator appears, replace the battery promptly to ensure continuous operation and data integrity. Use the specified battery type (e.g., CR2032, common for bike computers).
- Sensor and Magnet Alignment: Periodically check that the speed sensor and wheel magnet remain properly aligned (within 5mm) to ensure accurate readings. Adjust if necessary.
- Opbevaring: If storing the bike computer for an extended period, consider removing the battery to prevent leakage.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Intet display | Dødt eller forkert installeret batteri. | Check battery polarity or replace battery. |
| No speed reading / Incorrect speed | Sensor/magnet misalignment; Wireless interference; Incorrect wheel circumference. | Adjust sensor/magnet distance (max 5mm); Check for strong electromagnetic fields; Verify wheel circumference setting. |
| Display freezes or behaves erratically | Low battery; Temporary electronic glitch. | Replace battery; Remove and reinsert battery to reset. |
Specifikationer
- Model: Azur Z12
- Forbindelse: Trådløs
- Funktioner: Current Speed, Average Speed, Maximum Speed, Odometer, Trip Distance, Ride Time, 12/24 Hour Clock, Auto Scan, Low Battery Indicator, Auto On/Off, Unit Selection, Wheel Circumference Input.
- Vægt: 0.12 kilogram (120 gram)
- Montering: Uden brug af værktøj
- Strømkilde: Batteri (inkluderet)
Garanti og support
For warranty information or technical support regarding your Azur Z12 Wireless Bike Computer, please refer to the warranty card included with your product or contact Azur customer service through their official webwebsted. Gem din købsbevis til garantikrav.
