VisionTek VT2000 USB-C MST 3x Monitor Docking Station Instruction Manual

1. Introduktion

The VisionTek VT2000 Triple Display USB-C Dock is designed to expand the connectivity and display capabilities of your laptop, creating a versatile and efficient workstation. This plug-and-play docking station supports up to three external displays and offers a wide array of ports for peripherals, networking, and data transfer.

2. Pakkens indhold

Sørg for, at alle varer er til stede i kassen:

• VT2000 - Triple Display USB-C Docking Station with Power Passthrough
• USB-C til USB-C-kabel (1 m)
• Brugermanual

3. Produktet er slutview

The VT2000 docking station provides a comprehensive set of ports to enhance your productivity.

Frontpanelporte:

• Strømindikatorlys: Indikerer strømstatus.
• 3.5mm Combo In/Out Audio Jack: Til hovedtelefoner eller headsets.
• USB 3.0 (5Gbps) Ports: Two USB-C ports and one USB-A port for high-speed data transfer and device connectivity.
• MicroSD Reader: For reading MicroSD cards.
• SD Reader: Til læsning af standard SD-kort.

Bagpanelporte:

• gigabit ethernet: RJ45 port for wired network connectivity.
• USB 2.0 (480Mbps) Ports: Two USB-A ports for peripherals like keyboards and mice.
• DisplayPort: Two DisplayPort outputs for connecting external monitors.
• HDMI: One HDMI output for connecting an external monitor.
• USB-C strømforsyning: Input for the external power adapter (not included).
• USB-C til vært: Tilsluttes din bærbare computers USB-C-port.
• Kensington Lock Slot: Til sikring af enheden.

4. Systemkrav

To ensure optimal performance, your system must meet the following requirements:

• Operativsystem: Windows 11, 10, 8.1, 7 | macOS 10.10 and later
• Hardwarekrav:
  • USB-C Port with DisplayPort Alt Mode
  • USB-C Power Delivery Support
  • Up to 100W USB-C Power Supply for charging (Note: Power supply not included with the dock)
  • Host System must support DP 1.3 HBR3 for 2 displays @ 4K 30Hz.
  • Host System must support DP 1.3 and have onboard graphics that supports MST for 3 external displays at 1080p.

5. Opsætning

The VisionTek VT2000 is designed for simple plug-and-play functionality.

1. Tilslut strøm: Plug the external power adapter (not included) into the USB-C Power Supply port on the rear of the docking station and then into a wall outlet.
2. Opret forbindelse til vært: Use the provided USB-C to USB-C cable to connect the "USB-C to Host" port on the docking station to your laptop's USB-C port.
3. Tilslut ydre enheder: Attach your keyboard, mouse, external storage, and other USB devices to the available USB 3.0 and USB 2.0 ports on the front and rear panels.
4. Tilslut skærme: Connect your external monitors to the DisplayPort and HDMI outputs on the rear panel. Refer to the "Display Configuration & Resolutions" section for optimal setup.
5. Netværks forbindelse: For a wired network connection, plug an Ethernet cable into the Gigabit Ethernet port on the rear panel.
6. Lydenheder: Connect your headphones or headset to the 3.5mm combo audio jack on the front panel.

6. Betjening

Once connected, your operating system should automatically detect the docking station and connected devices. No additional drivers are typically required for basic functionality.

• Tænd/sluk: The docking station powers on automatically when connected to a powered laptop.
• Skærmtilstande: Utilize your laptop's display settings to configure extended, mirrored, or primary display modes across your connected monitors. The Multi-Stream Transport (MST) technology allows for flexible display arrangements.
• Dataoverførsel: Use the USB 3.0 ports for high-speed data transfer with compatible devices.
• Strømforsyning: The USB-C Power Passthrough port delivers up to 85W to charge your laptop if connected to a compatible power supply.

7. Display Configuration & Resolutions

The VT2000 supports various display configurations and resolutions, depending on your host system's capabilities.

*For Triple Display Output, Host System must have Dedicated Graphics with DP 1.4 and MST Support.

Note: Performance and maximum resolutions are dependent on host system's onboard video capabilities. macOS supports one external display extended up to 3840 x 2160 @ 60Hz or one external display mirrored.

8. Vedligeholdelse

To ensure the longevity and optimal performance of your VisionTek VT2000 docking station, follow these maintenance guidelines:

• Rensning: Use a soft, dry cloth to wipe the exterior of the docking station. Avoid using liquid cleaners or aerosol sprays, which may damage the device.
• Ventilation: Sørg for, at dockingstationen er placeret et godt ventileret område for at forhindre overophedning. Bloker ikke ventilationsåbninger.
• Opbevaring: Når dockingstationen ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.
• Kabelstyring: Keep cables organized and untangled to prevent damage to the ports and cables themselves.

9. Fejlfinding

If you encounter issues with your VisionTek VT2000 docking station, try the following steps:

• Ingen strøm: Ensure the external power adapter is securely connected to the docking station and a working power outlet.
• Ingen visning:
  • Verify that the USB-C to Host cable is securely connected to both the laptop and the docking station.
  • Check that monitor cables (DisplayPort, HDMI) are firmly connected to both the docking station and the monitors.
  • Sørg for, at din bærbare computers skærmindstillinger er konfigureret korrekt til udvidede eller spejlede skærme.
  • Confirm your laptop supports DisplayPort Alt Mode via its USB-C port.
• USB-enheder virker ikke:
  • Prøv at tilslutte USB-enheden til en anden USB-port på dockingstationen.
  • Connect the USB device directly to your laptop to rule out device issues.
  • Ensure the docking station has sufficient power.
• Problemer med Ethernet-forbindelse:
  • Kontroller Ethernet-kabelforbindelsen til både dockingstationen og din router/modem.
  • Bekræft netværksindstillingerne på din bærbare computer.
• Lyd virker ikke:
  • Ensure your audio device is correctly plugged into the 3.5mm combo jack.
  • Check your laptop's audio output settings to ensure the docking station's audio is selected.

If problems persist, please contact VisionTek Customer Support for further assistance.

10. Specifikationer

11. Garanti og support

The VisionTek VT2000 USB-C MST 3x Monitor Docking Station comes with a 2 års begrænset garanti. To activate your warranty and receive full customer support, please register your product within 30 days of purchase.

For technical assistance, troubleshooting, or warranty claims, please visit the official VisionTek website or contact their customer support team directly. Keep your proof of purchase for warranty validation.