1. Introduktion
Welcome to your new Canarm KORBER IOL458BK Outdoor Down Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
2. Vigtige sikkerhedsoplysninger
ADVARSEL: RISIKO FOR ELEKTRISK STØD. Afbryd strømmen ved afbryderen eller sikringsboksen før installation eller service.
- All electrical connections must be in accordance with local codes and the National Electric Code (NEC). If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.
- This fixture is intended for outdoor use. Ensure the installation location is suitable for wet conditions.
- Brug kun pæretypen og wattage specified in the specifications section. Exceeding the maximum wattage kan forårsage overophedning.
- Installer ikke denne armatur på overflader, der er let brandfarlige.
- Wear safety glasses and appropriate protective gear during installation.
- Sørg for, at armaturet er korrekt jordet.
3. Pakkens indhold
Carefully unpack your fixture and inspect for any damage. Ensure all components listed below are present before discarding packaging materials.
- Light Fixture Body (1)
- Clear Glass Shade (1)
- Monteringsplade (1)
- Monteringsskruer (2)
- Ledningskonnektorer (3)
- Pakning (1)
Figur 3.1: Forside view of the Canarm KORBER IOL458BK Outdoor Light, showing the matte black finish and clear glass shade.
4. Installationsvejledning
4.1 Nødvendigt værktøj
- Phillips hovedskruetrækker
- Trådstrippere
- Tang
- Elektrisk tape (valgfrit)
- Sikkerhedsbriller
4.2 Trin-for-trin installation
- Sluk for strømmen: Før du starter, skal du sørge for, at strømmen til samledåsen er slukket ved afbryderen eller sikringsskabet.
- Forbered monteringsoverfladen: Remove the old fixture (if applicable). Ensure the mounting surface is clean, dry, and structurally sound.
- Fastgør monteringsplade: Secure the mounting plate to the junction box using the provided mounting screws. Ensure the plate is flush against the wall.
- Foretag elektriske forbindelser:
- Tilslut sort ledningen fra armaturet til sort (hot) wire from the junction box.
- Tilslut hvid ledningen fra armaturet til hvid (neutral) ledning fra samledåsen.
- Tilslut jord ledningen fra armaturet til jord wire from the junction box (or to the green ground screw on the mounting plate).
- Sikker armatur: Carefully tuck all wires into the junction box. Align the fixture body with the mounting plate and secure it using the fixture screws. Ensure the gasket is properly seated between the fixture and the mounting surface for a watertight seal.
- Installer pære: Insert one 60W Type A maximum bulb (not included) into the socket. Do not exceed the recommended wattage.
- Fastgør glasskærm: Carefully place the clear glass shade over the bulb and secure it according to the fixture design (e.g., by tightening retaining screws or a threaded ring).
- Gendan strøm: Once installation is complete, restore power at the circuit breaker or fuse box and test the light fixture.
Figur 4.1: View of the mounting plate and wiring connections for the Canarm KORBER IOL458BK. Note the wire connectors and ground wire attachment.
Figur 4.2: Side view of the assembled Canarm KORBER IOL458BK Outdoor Light, illustrating its profile and how the glass shade is attached.
5. Betjeningsvejledning
The Canarm KORBER IOL458BK Outdoor Down Light operates with a standard wall switch (not included). Simply toggle the wall switch to turn the light fixture on or off.
5.1 Udskiftning af pære
Sådan udskiftes pæren:
- Sluk for strømmen til armaturet ved afbryderen.
- Allow the bulb to cool completely if it has been recently in use.
- Carefully remove the glass shade.
- Unscrew the old bulb and screw in a new 60W Type A maximum bulb.
- Reattach the glass shade.
- Genopret strømmen og test den nye pære.
6. Vedligeholdelse
Regular maintenance will help preserve the appearance and functionality of your outdoor light fixture.
- Rensning: Rengør armaturet med en blød, damp cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or glass. Ensure the power is off before cleaning.
- Inspektion: Periodically inspect the fixture for any signs of wear, damage, or loose connections. Check the gasket for integrity to maintain weather resistance.
- Udskiftning af pære: Replace bulbs as needed, following the instructions in Section 5.1.
7. Fejlfinding
If you encounter issues with your light fixture, refer to the table below for common problems and solutions.
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset lyser ikke. | Ingen strøm til armaturet. Pæren er defekt eller løs. Forkert ledningsforbindelse. | Tjek afbryder/sikring. Skift pæren, eller spænd den. Verify wiring connections (refer to Section 4.2). |
| Lyse flimrer. | Løs pære. Løs ledningsforbindelse. Defekt pære. | Spænd pæren. Check and secure wiring connections. Udskift pære. |
| Water inside glass shade. | Pakning ikke korrekt monteret. Damage to fixture seal. | Ensure gasket is correctly positioned during installation. Inspect fixture for cracks or damage; replace if necessary. |
8. Produktspecifikationer
| Feature | Detalje |
|---|---|
| Mærke | Canarm |
| Modelnummer | IOL458BK |
| Produktmål (D x B x H) | 6.5 x 4.75 x 10.5 tommer (16.51 x 12.07 x 26.67 cm) |
| Varens vægt | 3.3 pund (1.5 kg) |
| Strømkilde | Elektrisk med ledning |
| Indendørs/Udendørs brug | Udendørs |
| Lysarmatur Form | Væg |
| Farve / Finish | Matte Black, Clear Glass |
| Skærmmateriale | Glas |
| Antal lyskilder | 1 |
| Bulb Type (Max) | 60W Type A |
| Monteringstype | Vægmontering |
| Montering påkrævet | Ja |
| UPC | 062345445045 |
9. Garanti og support
For warranty information or technical assistance regarding your Canarm KORBER IOL458BK Outdoor Light, please contact Canarm customer service. Refer to the original purchase documentation for specific warranty terms and conditions.
You can also visit the official Canarm Store for more information and products: Canarm Official Store
