Indledning
The Geemarc Wake 'N' Shake Spot is a powerful alarm clock designed to effectively wake heavy sleepers and individuals with hearing impairments. It combines a loud alarm, a bright flashing light, and a vibrating pad to ensure you wake up. A unique feature is its red time projector, allowing you to display the time on your wall or ceiling.
Image: The Geemarc Wake 'N' Shake Spot alarm clock, showing its main unit with a digital display, a connected vibrating pad, and a red projected time on a surface. The display shows "12:00 AM" and "6:00 AM" for the alarm setting, along with icons for light, sound, and vibration.
Pakkens indhold
- Geemarc Wake 'N' Shake Spot Alarm Clock
- Vibrerende Pad
- Strømadapter
- Brugermanual
Opsætning
- Strømtilslutning: Connect the provided power adapter to the DC IN port on the back of the alarm clock and plug it into a wall outlet.
- Vibrating Pad Connection: Plug the vibrating pad's cable into the dedicated port on the alarm clock. Place the vibrating pad under your pillow or mattress.
- Indstilling af starttidspunkt: The display will light up. Follow the operating instructions to set the current time.
Betjeningsvejledning
Indstilling af tid
- Tryk og hold på TIDSINDSTILLING knap. Timecifrene vil blinke.
- Brug TIME og MINUT knapper for at justere tiden.
- Trykke TIDSINDSTILLING igen for at bekræfte og afslutte.
Indstilling af alarm
- Tryk og hold på ALARM SÆT knappen. Alarmtimecifrene blinker.
- Brug TIME og MINUT knapperne til at indstille det ønskede alarmtidspunkt.
- Trykke ALARM SÆT igen for at bekræfte.
- Brug ALARMtilstand button to select your preferred alarm combination:
- Kun vibrationer
- Vibration + Alarm Sound
- Vibration + Flashing Light
- Vibration + Alarm Sound + Flashing Light
Snooze funktion
Når alarmen lyder, skal du trykke på den store SLUM button to temporarily silence the alarm. The alarm will sound again after a set interval (adjustable from 5 to 60 minutes). If the alarm is not stopped, it will continue for one hour.
Tidsprojektion
The Wake 'N' Shake Spot features a red time projector. Adjust the projector's angle (90° pivot, 180° tilt) to display the time on your wall or ceiling. Press the PROJEKT knappen for at tænde eller slukke for projektionen.
Display Brightness and Night Light
Adjust the display brightness using the DIMMER button (3 levels). The white LED above the display can also function as a small night light; press the dedicated button to activate it.
Opretholdelse
- Rensning: Tør enheden af med en blød, tør klud. Brug ikke flydende rengøringsmidler eller slibende materialer.
- Opbevaring: If storing for an extended period, disconnect the power adapter.
- Miljø: Hold vækkeuret væk fra direkte sollys, varmekilder og overdreven fugtighed.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Alarmen lyder/vibrerer ikke. | Alarm is not set or alarm mode is incorrect. | Ensure alarm time is set and the desired alarm combination (vibration, sound, light) is selected. |
| Tidsprojektionen er sløret eller ikke synlig. | Projector lens needs adjustment or surface is too far/bright. | Adjust the projector's angle and focus. Ensure the room is dark enough for clear projection. |
| Skærmen er for svag eller for lys. | Lysstyrkeindstillingen er ikke optimal. | Tryk på DIMMER knappen for at skifte mellem lysstyrkeniveauerne. |
Specifikationer
- Mærke: Geemarc
- Modelnummer: JWNS-SPOT_BLK_VDE
- Farve: Sort
- Dimensioner (L x B x H): 30 x 3.81 x 10 cm (11.8 x 1.5 x 3.9 tommer)
- Vægt: 320 gram (0.7 lbs)
- Materiale: Plast
- Alarm lydniveau: Op til 95dB
- Snooze-varighed: 5 to 60 minutes (adjustable)
- Skærmtype: Digital
- Strømkilde: Elektrisk med ledning
Garanti og support
For warranty information and technical support, please refer to the official Geemarc webwebstedet eller kontakt deres kundeservice direkte. Gem din købsbevis til eventuelle garantikrav.
Webwebsted: www.geemarc.com
