1. Introduktion
Thank you for choosing the LUTEC P6221W-PIR24 Motion Activated Dual-Head Floodlight. This manual provides essential information for the safe installation, operation, and maintenance of your new security light. Please read these instructions carefully before installation and retain them for future reference.
This floodlight features two adjustable LED light heads, an integrated motion sensor, and is designed for outdoor use, providing 2000 lumens of bright, 5200K daylight white light with 18 watts of power consumption.
Image 1.1: Two LUTEC P6221W-PIR24 dual-head floodlights, showcasing the product's design and dual light heads.
2. Sikkerhedsoplysninger
- Elektrisk sikkerhed: Always turn off power at the circuit breaker before installing, servicing, or cleaning the fixture. Consult a qualified electrician if you are unsure about wiring procedures.
- Jording: Sørg for, at armaturet er korrekt jordforbundet for at undgå potentielt elektrisk stød.
- Udendørs brug: This product is rated IP54 for outdoor use and is waterproof. However, ensure all connections are sealed properly to prevent water ingress.
- Varme: LED lights can generate heat. Do not touch the fixture immediately after operation.
- Øjensikkerhed: Do not stare directly into the LED light source when illuminated, as it may cause eye strain or damage.
- Installationshøjde: For optimal motion detection, install the light at a recommended height of approximately 8.2 feet (2.5 meters).
3. Pakkens indhold
Kontroller, at alle komponenter er til stede, før installationen påbegyndes:
- LUTEC P6221W-PIR24 Dual-Head Floodlight (2 units)
- Wire connectors (2 x 18AWG)
- Outlet Box Screws (2)
- Monteringsbeslag (1)
- Fixture Screws (2)
- Rubber Stopper (1)
- Pakning (1)
Image 3.1: Diagram illustrating the various components included in the package, such as wire connectors, screws, mounting bracket, rubber stopper, and gasket.
4. Opsætning og installation
Følg disse trin for korrekt installation:
- Sluk for strømmen: Before starting, ensure the power to the installation area is turned off at the circuit breaker.
- Montering af monteringsbeslag: Secure the mounting bracket to the wall or junction box using the provided outlet box screws. Ensure it is firmly attached.
- Ledningsføring: Connect the floodlight's wires to your household wiring. Typically, this involves connecting the black wire (live) to black, white wire (neutral) to white, and the ground wire to ground. Use the provided wire connectors and ensure all connections are secure.
- Fastgørelsesanordning: Carefully align the floodlight fixture with the mounting bracket and secure it using the fixture screws. Ensure the gasket is properly seated to maintain the waterproof seal.
- Juster lyshoveder og sensor: The dual light heads and the motion sensor are adjustable. Position them to cover your desired area. The light heads can be rotated 360 degrees, and the sensor can be angled for optimal detection.
- Gendan strøm: Når installationen er færdig, og alle forbindelser er sikre, skal strømmen genoprettes ved afbryderen.
Image 4.1: A person using a screwdriver to secure the floodlight during installation, demonstrating the final mounting step.
Image 4.2: A diagram illustrating the adjustable design of the floodlight, with arrows indicating the rotational movement of the light heads and motion sensor for customizable coverage.
Image 4.3: The floodlight installed above a house entryway, demonstrating its motion sensor capabilities with a 110-degree sensing angle and a maximum range of 50 feet. The image also highlights the recommended installation height of 8.2 feet for optimal performance.
5. Betjeningsvejledning
The LUTEC P6221W-PIR24 floodlight is designed for automatic operation based on motion detection.
Indstillinger for bevægelsessensor
The motion sensor has a 110-degree sensing angle and can detect motion up to 50 feet (approximately 15 meters) away. The duration for which the light stays on after motion detection can be adjusted using the switch located on the motion sensor unit.
Billede 5.1: Et nærbillede view of the motion sensor's adjustment switch, showing options for setting the light duration to 1 minute, 3 minutes, 10 minutes, or a 'TEST' mode.
- TEST-tilstand: Use this setting during installation to verify the sensor's coverage area. The light will turn on for a short period each time motion is detected.
- 1 MIN.: The light will remain on for approximately 1 minute after motion is no longer detected.
- 3 MIN.: The light will remain on for approximately 3 minutes after motion is no longer detected.
- 10 MIN.: The light will remain on for approximately 10 minutes after motion is no longer detected.
Image 5.2: The floodlight illuminating a backyard at night, visually representing the adjustable lighting durations of 1, 3, and 10 minutes after motion detection.
6. Vedligeholdelse
Regelmæssig vedligeholdelse sikrer optimal ydeevne og levetid for din projektør.
- Rensning: Rengør lampehovederne og bevægelsessensorlinsen med jævne mellemrum med en blød klud.amp klud. Brug ikke slibende rengøringsmidler eller opløsningsmidler. Sørg for, at strømmen er slukket, før rengøring.
- Inspektion: Regularly inspect the fixture for any signs of damage, loose connections, or wear. Address any issues promptly.
- Vandtæt forsegling: Check the integrity of the waterproof seals, especially around the mounting area, to prevent water intrusion.
Image 6.1: The LUTEC floodlight installed on an exterior wall, shown with rain falling, emphasizing its waterproof design suitable for various outdoor applications.
7. Fejlfinding
Hvis du støder på problemer med din projektør, kan du se følgende almindelige problemer og løsninger:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Lyset tændes ikke. | Ingen strømforsyning. Løs ledningsforbindelse. Sensoren registrerer ikke bevægelse. | Tjek afbryderen. Kontroller, at alle ledningsforbindelser er sikre (sluk først). Adjust sensor angle or test sensitivity. |
| Lyset forbliver tændt konstant. | Kontinuerlig bevægelse i detektionszonen. Sensor setting incorrect. | Clear obstructions or adjust sensor angle. Check the time setting on the sensor (e.g., ensure it's not stuck in TEST mode). |
| Lys tændes uden nogen åbenbar grund. | Sensor, der registrerer små dyr, grene i bevægelse eller varmekilder. | Adjust sensor angle to exclude unwanted detection areas. |
| Lyset flimrer eller dæmpes. | Ustabil strømforsyning. Løs forbindelse. | Kontakt en elektriker for at kontrollere strømforsyningen. Kontroller, at alle ledningsforbindelser er sikre (sluk først). |
8. Specifikationer
- Model: P6221W-PIR24
- Mærke: LUTEC
- Strømforbrug: 18 watt
- Lysstyrke: 2000 lumen
- Farvetemperatur: 5200K dagslys hvid
- Lyskildetype: LED
- Voltage: 120 volt (AC)
- Bevægelsessensor: 110° sensing angle, up to 50 feet (15 meters) detection range
- Adjustable Lighting Time: 1 min, 3 min, 10 min
- Vandtæthed: IP54, vandtæt
- Materiale: Plast
- Monteringstype: Vægmontering
- Dimensioner (B x D x H): 10.28" x 5.59" x 7.24" (26.1 cm x 14.2 cm x 18.4 cm)
- Varens vægt: 1.83 pund (0.83 kg)
Image 8.1: A visual representation of the floodlight's key specifications, including its dimensions (W:10.28", D:5.59", H:7.24"), super bright 2000 lumen output, and 5200K color temperature.
9. Garanti og support
LUTEC provides high-quality after-sales service. If you encounter any issues or have questions regarding your P6221W-PIR24 floodlight, please contact LUTEC customer support. We are available 7 days a week, 24 hours a day to assist you.
For support, please visit the official LUTEC webwebstedet eller se de kontaktoplysninger, der følger med din produktemballage.
