Produkt overview
The Nerf Elite 2.0 Volt SD-1 Blaster is designed for enhanced targeting and customizable play. This compact blaster comes with 6 Official Nerf darts and features a light beam for improved accuracy in low-light conditions. It also includes 2 tactical rails for attaching accessories (sold separately) and built-in storage for 2 darts, ensuring quick reloads during play.

Image: Nerf Elite 2.0 Volt SD-1 Blaster in its retail packaging, showcasing the blaster, darts, and key features.
Komponenter
Your Nerf Elite 2.0 Volt SD-1 Blaster package includes:
- 1 x Nerf Elite 2.0 Volt SD-1 Blaster
- 6 x Official Nerf Darts
- Instruktionsmanual

Image: The Nerf Elite 2.0 Volt SD-1 Blaster displayed alongside its 6 included Official Nerf Darts.
Opsætning
Battery Installation (for Light Beam)
The light beam targeting feature requires 2 AAA batteries (not included). To install:
- Find batterirummet på blasteren.
- Skru dækslet til batterirummet af med en stjerneskruetrækker (medfølger ikke).
- Isæt 2 AAA-batterier, og sørg for at polerne vender korrekt (+/-).
- Sæt dækslet på igen og fastgør det med skruen.
Indlæsning af dart
To load a dart into the blaster:
- Insert one Official Nerf dart into the barrel at the front of the blaster. Push it in firmly until it is seated properly.
- For quick reloads, store up to 2 additional darts in the built-in storage slots located in the handle of the blaster.

Billede: Forside view of the Nerf Elite 2.0 Volt SD-1 Blaster, showing the barrel where darts are loaded.
Betjeningsvejledning
Priming and Firing
- Ensure a dart is loaded into the barrel.
- Pull the priming handle at the back of the blaster all the way back until it clicks into place. This primes the blaster for firing.
- Aim at your target.
- Press the trigger to fire the dart.
Using the Light Beam Targeting
To activate the light beam for enhanced targeting:
- Locate the light beam switch on the front underside of the blaster.
- Slide the switch to the 'ON' position to activate the light beam.
- The light beam will project a red dot onto your target, assisting with aim up to 15 feet (4.5 meters) away.
- Skub kontakten til 'OFF'-positionen, når den ikke er i brug, for at spare på batteriet.
Video: Et produkt overståetview demonstrating the features and operation of the Nerf Elite 2.0 Volt SD-1 Blaster.
Video: Officiel produktvideoasing the Nerf Elite 2.0 Volt SD-1 Blaster in action, highlighting its light beam and dart storage.
Opretholdelse
- Rensning: Tør blasteren af med reklameamp cloth to remove dust and dirt. Do not submerge in water.
- Pleje af dartpile: Use only Official Nerf darts. Inspect darts regularly for damage. Damaged darts may affect performance and could cause jams. Do not modify darts.
- Udskiftning af batteri: Replace batteries when the light beam becomes dim or stops working. Always use fresh, new batteries of the specified type.
- Opbevaring: Store the blaster and darts in a cool, dry place away from direct sunlight when not in use.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Dart does not fire or jams | Blaster not fully primed; Damaged dart; Non-Official dart used | Pull priming handle all the way back until it clicks; Replace dart with a new, Official Nerf dart |
| Light beam is dim or not working | Low or dead batteries; Batteries incorrectly installed; Light beam switch is off | Replace batteries; Check battery polarity; Slide light beam switch to 'ON' |
Specifikationer
- Produktdimensioner: 10.5 x 2.25 x 8 tommer
- Varens vægt: 7.1 ounce
- Modelnummer: E9952
- Producentens anbefalede alder: 8 - 8 år
- Batterier påkrævet: 2 AAA batterier (medfølger ikke)
- Dart Firing Range: Op til 90 fod (27 meter)
- Light Beam Range: Op til 15 fod (4.5 meter)
- Fabrikant: Hasbro
Sikkerhedsoplysninger
WARNING: To avoid eye injury:
- Sigt ikke mod øjne eller ansigt.
- Use of eyewear recommended for players and people within range.
- Use only Official Nerf darts. Other darts may not meet safety standards.
- Do not modify blaster or darts.
Støtte
For further assistance or inquiries, please contact the manufacturer directly. Refer to the product packaging for contact details.





