NERF Elite 2.0 Commander RD-6 Dart Blaster

1. Introduktion

The Nerf Elite 2.0 Commander RD-6 Dart Blaster is designed for active play, featuring a 6-dart rotating drum and the ability to fire darts up to 90 feet (27 meters). This manual provides essential information for safe and effective use of your blaster.

Image 1: The Nerf Elite 2.0 Commander RD-6 Dart Blaster, shown with 12 included darts.

2. Sikkerhedsoplysninger

WARNING: CHOKING HAZARD. Not for children under 3 years.

• Always use official NERF Elite darts. Other darts may not meet safety standards.
• Modificer ikke dart eller blaster.
• Do not aim at eyes or face. Eyewear is recommended (not included).
• Voksenopsyn anbefales under leg.

3. Hvad er der i æsken

Your Nerf Elite 2.0 Commander RD-6 package includes:

• 1 x Nerf Elite 2.0 Commander RD-6 Blaster
• 12 x Nerf Elite Darts (6 for the drum, 6 for reload)

Image 2: The Nerf Elite 2.0 Commander RD-6 Dart Blaster as it appears in its retail packaging.

4. Opsætning

4.1 Loading Darts

1. Ensure the blaster is not primed.
2. Insert one Nerf Elite dart into each of the 6 chambers in the rotating drum. Push the darts in firmly until they are seated.
3. Keep the remaining 6 darts nearby for quick reloads during play.

Image 3: Demonstrates the process of loading darts into the blaster's rotating drum.

5. Betjening af blæseren

5.1 Single-Shot Firing

1. Load darts into the rotating drum as described in Section 4.1.
2. Grip the priming slide located on top of the blaster.
3. Pull the priming slide backward completely, then push it forward until it clicks into place. The blaster is now primed.
4. Aim at your target (remembering safety guidelines).
5. Pull the trigger to launch one dart. The drum will rotate to the next dart automatically.

Image 4: A person demonstrating the aiming posture with the Nerf Elite 2.0 Commander RD-6 Blaster.

5.2 Slam-Fire Action

For rapid-fire action, use the slam-fire feature:

1. Load darts and prime the blaster as for single-shot firing.
2. Hold down the trigger.
3. Rapidly pull the priming slide backward and push it forward repeatedly. Darts will launch in quick succession as you cycle the slide.

ALDRIG tilpasning

The Commander RD-6 features 2 tactical rails and attachment points for a stock and a barrel. These allow for customization with compatible Nerf accessories (sold separately).

Billede 5: Et nærbillede view of the Nerf Elite 2.0 Commander RD-6 Blaster, highlighting its design and attachment points.

6. Vedligeholdelse

• Keep the blaster clean and free of dirt or debris. Use a dry cloth to wipe down surfaces.
• Store darts in a clean, dry place to maintain their shape and performance.
• Avoid exposing the blaster to extreme temperatures or direct sunlight for prolonged periods.

7. Fejlfinding

7.1 Dart Jams

If a dart jams:

1. Ensure the blaster is not primed and the trigger is not held down.
2. Carefully inspect the dart drum and barrel for any lodged darts.
3. Gently remove any jammed darts. Do not force them, as this may damage the blaster.
4. Check darts for damage (e.g., bent tips, torn foam). Damaged darts can cause frequent jams and should be replaced.

8. Specifikationer

9. Garanti og support

For garantioplysninger eller produktsupport henvises til producentens officielle webwebstedet eller kontakt deres kundeservice. Behold din købskvittering som købsbevis.