PowerWalker VI 3000 SCL FR UPS Brugermanual

1. Introduktion

Thank you for choosing the PowerWalker VI 3000 SCL FR Uninterruptible Power Supply (UPS). This device is designed to provide reliable power protection for your electronic equipment against power outages, surges, and spikes. It ensures continuous operation and safeguards your valuable data and hardware.

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your UPS. Please read it thoroughly before using the product and keep it for future reference.

Figure 1.1: PowerWalker VI 3000 SCL FR UPS

This image shows the PowerWalker VI 3000 SCL FR UPS from an angled front perspective, highlighting its compact black casing and the front display panel.

2. Sikkerhedsinstruktioner

Please observe the following safety precautions to ensure safe operation and to prevent damage to the UPS or connected equipment.

• Elektrisk sikkerhed: Åbn ikke UPS'en casing. There are no user-serviceable parts inside. Refer all servicing to qualified service personnel. Ensure the UPS is connected to a grounded power outlet.
• Placering: Place the UPS in a well-ventilated area, away from direct sunlight, heat sources, and moisture. Do not block ventilation openings.
• Batterisikkerhed: The UPS contains internal batteries. Do not dispose of batteries in a fire, as they may explode. Do not open or mutilate batteries. Electrolyte is harmful to the skin and eyes.
• Overbelaste: Do not overload the UPS. Ensure the total power consumption of connected devices does not exceed the UPS's rated capacity (1800W).

3. Pakkens indhold

Carefully unpack the UPS and check the contents of the package. You should find the following items:

• PowerWalker VI 3000 SCL FR UPS Unit
• Brugervejledning (dette dokument)
• USB Cable (for HID driver communication)
• Strømledning(er)

Hvis nogen dele mangler eller er beskadiget, bedes du straks kontakte din forhandler.

4. Produktet er slutview

4.1 Frontpanel

Figure 4.1: Front Panel of the UPS

This image displays the front panel of the PowerWalker VI 3000 SCL FR UPS, showing the LCD display and the power button.

1. LCD-skærm: Viser statusinformation i realtid, såsom input/output volumentage, battery level, load capacity, and various operational modes.
2. Power knap: Used to turn the UPS ON or OFF.

4.2 Bagpanel

Figure 4.2: Rear Panel of the UPS

This image illustrates the rear panel of the PowerWalker VI 3000 SCL FR UPS, detailing the various input/output ports and sockets.

1. COM.PORT (RS-232): Serial communication port for monitoring software.
2. USB-port: USB communication port for monitoring software and HID driver functionality.
3. Output Sockets (French Type): Connect your critical equipment here. These outlets provide battery backup and surge protection.
4. Input strømledning: Tilslutter UPS'en til strømudtaget.
5. RJ11/RJ45 Protection (IN/OUT): Giver overspændingsbeskyttelse til telefon-/netværkslinjer.
6. Nulstil knap: Used to reset the UPS in certain error conditions.

5. Opsætning

5.1 Placering

Choose a suitable location for your UPS:

• Placer UPS'en på en flad, stabil overflade.
• Ensure adequate airflow around the unit. Maintain at least 10 cm (4 inches) clearance from walls or other obstructions.
• Avoid areas with excessive dust, humidity, or extreme temperatures.

5.2 Tilslutning til strøm

1. Connect the UPS input power cord to a grounded wall outlet.
2. Allow the UPS to charge for at least 8 hours before initial use to ensure optimal battery runtime. The UPS will charge whether it is turned ON or OFF.

5.3 Tilslutning af udstyr

1. Plug your computer, monitor, and other critical devices into the output sockets on the rear panel of the UPS.
2. Do not connect laser printers or shredders to the UPS, as their high surge current during startup may overload the unit.
3. For network/telephone line protection, connect your modem/router to the RJ11/RJ45 IN port and then connect the OUT port to your device.

6. Betjening

6.1 Turning the UPS ON/OFF

• At tænde: Tryk på tænd/sluk-knappen på frontpanelet og hold den nede i cirka 3 sekunder, indtil du hører et bip, og LCD-displayet lyser.
• At slukke: Tryk på tænd/sluk-knappen og hold den nede i cirka 3 sekunder, indtil du hører et bip, og LCD-skærmen slukker.

6.2 Forståelse af LCD-skærmen

The LCD display provides real-time status of the UPS. Key indicators include:

• Input bindtage: Displays the current utility power voltage.
• Udgang Voltage: Viser voltage supplied by the UPS to connected devices.
• Batteriniveau: Angiver den resterende batteriopladning.
• Belastningskapacitet: Viser procententage of the UPS's capacity being used by connected devices.
• Driftstilstand: Indicates if the UPS is operating on utility power (AC mode) or battery power (Battery mode).

6.3 Softwareinstallation (valgfrit)

For advanced monitoring and management features, you can install the PowerWalker monitoring software. This software allows you to:

• Overvåg UPS-status og strømforhold.
• Perform scheduled shutdowns.
• Receive alerts for power events.

Connect the UPS to your computer using the provided USB cable. The UPS supports HID (Human Interface Device) driver, allowing basic functionality without additional software on compatible operating systems.

7. Vedligeholdelse

7.1 Pleje af batterier

• To maintain optimal battery life, ensure the UPS is connected to a power outlet at all times to keep the batteries charged.
• Perform a battery calibration (if supported by software) or a full discharge/recharge cycle every 3-6 months to ensure accurate battery runtime readings.
• Batteries are consumable items and will degrade over time. Replace batteries when their runtime significantly decreases.

7.2 Rengøring

Rengør UPS'ens yderside med en blød, tør klud. Brug ikke flydende rengøringsmidler eller rengøringsmidler på aerosolbasis. Sørg for, at ventilationsåbningerne er fri for støv og snavs.

7.3 Opbevaring

If storing the UPS for an extended period, ensure the batteries are fully charged. Recharge the batteries every three months to prevent permanent damage due to self-discharge.

8. Fejlfinding

If you encounter issues with your UPS, refer to the following table for common problems and solutions:

Hvis problemet fortsætter efter at have prøvet ovenstående løsninger, bedes du kontakte kundesupport.

9. Specifikationer

Technical specifications for the PowerWalker VI 3000 SCL FR UPS:

10. Garanti og support

10.1 Garantioplysninger

PowerWalker products are manufactured to the highest quality standards. This UPS comes with a standard manufacturer's warranty against defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official PowerWalker webhjemmeside for detaljerede garantivilkår.

10.2 Kundesupport

For technical assistance, troubleshooting, or warranty claims, please contact PowerWalker customer support. You can typically find contact information on the PowerWalker official webwebstedet eller gennem din lokale distributør.

Når du kontakter support, bedes du have dit produktmodelnummer (10121151) og serienummer klar.