Yale YSFB/250/EB1 Motoriseret Højsikkerheds Pengeskab med Fingeraftryk Brugermanual

1. Introduktion

This manual provides essential instructions for the safe and proper use of your Yale YSFB/250/EB1 Motorized High-Security Safe. Please read this manual thoroughly before installation and operation to ensure optimal performance and security.

The Yale Fingerprint motorized high-security safes are reliable, premium quality products featuring a laser-cut door, reinforced hinges, and automatic spring-loaded door opening. A digital keypad with a blue backlit LCD screen includes all the features and benefits of a motorized safe.

2. Sikkerhedsoplysninger

• Do not store the emergency key inside the safe. Keep it in a secure, separate location.
• Keep your user codes and master codes confidential and do not write them down where they can be easily found.
• Sørg for, at pengeskabet er sikkert monteret for at forhindre uautoriseret fjernelse.
• Udskift batterierne med det samme, når indikatoren for lavt batteri vises, for at undgå at blive låst ude.
• This safe is designed for indoor use only.

3. Pakkens indhold

Kontroller, at alle varer er til stede i kassen:

• 1 x Yale YSFB/250/EB1 Motorized High-Security Safe
• 1 x Emergency Key (double-bit)
• 4 x AA-alkaliske batterier
• 4 x Metal Fixing Bolts
• Brugervejledning (dette dokument)

4. Opsætning

4.1. Batteriinstallation

1. Open the safe door using the emergency key (refer to Section 5.3 for emergency key use).
2. Find batterirummet på indersiden af ​​døren.
3. Insert the 4 AA alkaline batteries, ensuring correct polarity (+/-).
4. Luk batterirummets dæksel.

4.2. Montering af pengeskabet

The safe is equipped with pre-drilled holes for secure mounting to a wall or floor. It is recommended to fix the safe using the provided metal fixing bolts to prevent unauthorized removal.

• Vælg et passende sted til installation.
• Mark the drilling points through the holes located on the bottom and/or back of the safe.
• Drill holes in the wall or floor using an appropriate drill bit.
• Position the safe and secure it using the provided fixing bolts.

5. Betjeningsvejledning

5.1. Initial Opening and Closing

Upon first use, open the safe using the emergency key. Once open, install the batteries as described in Section 4.1.

5.2. Programming User Code

The user code can be 3 to 8 digits long. It is recommended to program the code with the safe door open.

1. With the door open, press the # button. The display will show 'PROG'.
2. Enter your desired 3 to 8 digit user code.
3. Tryk på # button again to confirm. The display will show 'GOOD' to indicate successful programming.

5.3. Programmering af fingeraftryk

The safe allows for multiple fingerprints to be stored. It is recommended to program fingerprints with the safe door open.

1. With the door open, press the ✓ (check mark) button followed by the 5 button. The display will show a message ending with '1', indicating it's ready to capture the first fingerprint image.
2. Place your finger firmly on the fingerprint scanner. Lift and place your finger two more times as prompted by the display (total of 3 scans for one fingerprint).
3. The display will show 'GOOD' if the fingerprint is successfully registered.
4. Repeat steps 1-3 to add additional fingerprints (e.g., other fingers or authorized users).

5.4. Åbning af pengeskabet

The safe can be opened using a PIN code, fingerprint, master code, or emergency key.

• Brug af PIN-kode: Enter your 3-8 digit user code and press #. The door will automatically open.
• Brug af fingeraftryk: Place your registered finger on the fingerprint scanner. The door will automatically open.
• Brug af nødnøgle: Remove the small plastic cover next to the fingerprint scanner to reveal the keyhole. Insert the emergency key and turn it to open the safe.

5.5. Lukning af pengeskabet

To close the safe, simply push the door shut. The motorized bolts will automatically engage. If the safe was opened using the electronic methods (PIN or fingerprint), it must be closed by pressing the ✓ (check mark) button followed by the nøglesymbol button. If the safe was opened with the emergency key, it must be closed by turning the key back to the locked position.

6. Vedligeholdelse

6.1. Udskiftning af batteri

When the batteries are low, the display will indicate a low battery warning. Replace all 4 AA batteries promptly to ensure continuous operation. Refer to Section 4.1 for battery installation steps.

6.2. Rensning

Rengør pengeskabets yderside med en blød, tør kludamp cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.

7. Fejlfinding

• Safe does not open with PIN/Fingerprint:
  • Check if batteries are depleted. Replace them if necessary.
  • Ensure you are entering the correct PIN or using a registered fingerprint.
  • Try using the external 9V battery power source (see below).
  • Use the emergency key to open the safe.
• External 9V Battery for Emergency Power: If the internal batteries are completely depleted and you cannot open the safe electronically, you can use an external 9V battery.
  1. Locate the two metal terminals on the keypad panel.
  2. Press a 9V battery firmly against these terminals.
  3. While holding the 9V battery in place, enter your PIN code or use your fingerprint to open the safe.

8. Specifikationer

9. Garanti og support

This product comes with a 1-year availability for spare parts. For further support or inquiries, please visit the official Yale webwebsted eller kontakt deres kundeservice.

For information regarding privacy and legal policies, please refer to the official Yale webwebsted: Yale Privacy and Legal Center