Intermec Easycoder PD42 termisk stregkodelabelprinter brugermanual

1. Introduktion

This manual provides instructions for the setup, operation, and maintenance of the Intermec Easycoder PD42 Thermal Barcode Label Printer. The PD42 is a robust industrial printer designed for high-volume label printing, featuring thermal transfer technology, multiple connectivity options, and an integrated rewinder for efficient label handling.

2. Sikkerhedsoplysninger

Please read all safety instructions before operating the printer to prevent injury or damage. Keep the printer away from liquids and extreme temperatures. Ensure proper ventilation. Only use approved power cords and accessories. Disconnect power before performing any maintenance.

• Bloker ikke ventilationsåbninger.
• Brug kun den strømforsyning, der er angivet til denne enhed.
• Avoid touching hot printhead components immediately after printing.
• Hold hænderne væk fra bevægelige dele under drift.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

• Intermec Easycoder PD42 Thermal Barcode Label Printer
• Strømledning
• Integrated Rewinder
• Documentation (Quick Start Guide, Safety Manual)
• USB-kabel (kan variere afhængigt af region/pakke)

4. Fysisk overview

Figur 4.1: Forside View of the PD42 Printer. This image displays the front of the Intermec Easycoder PD42 printer, showing the control panel with an LCD screen and buttons, and the label output slot with printed barcode labels visible.

Figur 4.2: Intern View of the PD42 Printer. This image shows the interior of the printer with the top cover open, revealing the label roll spindle, ribbon supply and take-up spindles, and the path for media loading. The integrated rewinder mechanism is also visible.

Figur 4.3: Bagside View of the PD42 Printer. This image illustrates the back panel of the Intermec Easycoder PD42 printer, highlighting various connectivity ports including Parallel, Serial, USB, and Network (Ethernet) interfaces, along with the power input and main power switch.

5. Opsætning

5.1 Tilslutning af printeren

1. Strømtilslutning: Tilslut netledningen til printerens strømindgang og derefter til en jordforbundet stikkontakt.
2. Interfaceforbindelse: Choose one of the available interfaces (USB, Parallel, Serial, or Network) and connect the appropriate cable from your computer or network to the printer.
   • USB: Connect a standard USB cable to the USB port on the printer and your computer.
   • Parallel: Connect a parallel cable to the parallel port on the printer and your computer.
   • Serie: Connect a serial cable to the serial port on the printer and your computer.
   • Netværk (Ethernet): Connect an Ethernet cable to the network port on the printer and your network router/switch.
3. Tænd: Flip the main power switch located at the rear of the printer to the 'ON' position.

5.2 Loading Media (Labels and Ribbon)

The PD42 printer uses thermal transfer technology, requiring both labels and a thermal ribbon. Refer to Figure 4.2 for visual guidance.

1. Åbn låg: Lift the top cover of the printer.
2. Indlæs etiketter: Place the roll of labels onto the label supply spindle. Ensure the labels feed smoothly through the guides and under the printhead assembly.
3. Indlæs bånd: Install the thermal ribbon onto the ribbon supply spindle and thread it through the print mechanism, ensuring the coated side faces the labels. Secure the used ribbon onto the take-up spindle.
4. Luk låg: Luk topdækslet forsvarligt.
5. Calibrate Media: Follow the printer's on-screen prompts or refer to the advanced settings for media calibration to ensure accurate label detection.

6. Betjening

6.1 Grundlæggende udskrivning

Once the printer is connected and media is loaded, you can send print jobs from your computer. Ensure the correct printer driver is installed and configured for the chosen interface.

• From your application, select "Print".
• Choose the "Intermec Easycoder PD42" from the list of available printers.
• Adjust print settings such as label size, print density, and speed as needed.
• Click "Print" to start the print job.

6.2 Interfacekonfiguration

The PD42 supports various communication interfaces. Network configuration typically involves assigning an IP address, which can be done via the printer's control panel or a web interface if enabled. USB, Parallel, and Serial connections are generally plug-and-play with appropriate drivers.

7. Vedligeholdelse

7.1 Rengøring

Regular cleaning ensures optimal print quality and extends printer lifespan. Always power off and unplug the printer before cleaning.

• Printhoved: Gently wipe the printhead with an alcohol wipe or a lint-free cloth dampened with isopropyl alcohol. Allow to dry completely.
• Valseplade: Clean the platen roller with an alcohol wipe to remove adhesive residue or dust.
• Ydre: Tør de udvendige overflader af med en blød, damp klæde. Brug ikke slibende rengøringsmidler.

7.2 Udskiftning af forbrugsvarer

Replace labels and thermal ribbon as they run out. Follow the loading instructions in Section 5.2. Ensure you use compatible labels and ribbons for best performance.

8. Fejlfinding

9. Specifikationer

10. Garanti og support

The Intermec Easycoder PD42 printer comes with a limited warranty. For specific warranty terms and conditions, please refer to the warranty documentation included with your product or visit the official Intermec (now Honeywell) support webwebsted.

For technical support, driver downloads, or further assistance, please contact your authorized Intermec reseller or visit the manufacturer's support portal. Ensure you have your printer's model number (PD42GJ1100001020) and serial number ready when seeking support.