Produkt overview
This instruction manual provides detailed guidance for installing and operating the BRIKSMAX LED Lighting Kit designed specifically for the LEGO 75257 Millennium Falcon model. The kit enhances the visual appeal of your LEGO set by illuminating various sections with LED lights. Please note that the LEGO building blocks model set is not included with this lighting kit.
Hvad er inkluderet
The BRIKSMAX LED Lighting Kit for the LEGO 75257 Millennium Falcon includes the following components:
- Dot Lights (various colors and lengths)
- Expansion Boards (8-port and 6-port)
- Tilslutningskabler
- Battery Holder (requires 3 AA batteries, not included)
- Klæbende firkanter
- USB strømkabel
- LEGO Plates (random colors, for integration)
- Instruktionsmanual
Installationsvejledning
Follow these steps carefully to install your BRIKSMAX LED Lighting Kit. Patience and attention to detail are essential for a successful installation. It is recommended to refer to the detailed video instructions for visual guidance.
Generel installation overståetview
Detailed Installation Steps (Part 2)
This video focuses on specific steps for integrating the lighting components into your LEGO Millennium Falcon model. Pay close attention to wire routing and component placement.
Additional Product Showcase
Observe the final appearance of the illuminated model from various angles to understand the intended lighting effects.
Vigtige overvejelser:
- Handle wires and small components with care to prevent damage.
- Sørg for, at alle forbindelser er sikre, før du tænder for sættet.
- Refer to the included printed instructions for step-by-step diagrams.
Betjeningsvejledning
To operate your BRIKSMAX LED Lighting Kit:
- Insert 3 AA batteries (not included) into the battery holder. Ensure correct polarity.
- Connect the battery holder to the main expansion board.
- Alternatively, connect the USB power cable to the main expansion board and a compatible USB power source (e.g., power bank, USB wall adapter).
- The lights should illuminate once power is supplied. This kit does not include a remote control.
Opretholdelse
To ensure the longevity and optimal performance of your lighting kit:
- Hold sættet rent og fri for støv. Brug en blød, tør klud til rengøring.
- Avoid exposing the kit to excessive moisture or extreme temperatures.
- When not in use for extended periods, remove batteries from the battery holder to prevent leakage.
- Do not pull on the wires forcefully, as this can damage connections.
Fejlfinding
If you encounter issues with your BRIKSMAX LED Lighting Kit, consider the following:
- Lysene lyser ikke:
- Check if batteries are correctly inserted and have sufficient charge.
- Ensure all connecting cables are securely plugged into the expansion boards and lights.
- Verify that the power source (battery holder or USB) is functioning correctly.
- Flimrende lys:
- Undersøg forbindelserne for løse dele.
- Ensure wires are not pinched or damaged by LEGO bricks.
- Overheating or burning smell:
- Immediately disconnect power. This indicates a short circuit or component malfunction. Recheck all wiring for proper insulation and connections. Contact customer support if the issue persists.
Specifikationer
| Feature | Detalje |
|---|---|
| Mærke | BRIKSMAX |
| Modelnummer | BX281 |
| Kompatibelt LEGO-sæt | 75257 Millennium Falcon |
| Lyskildetype | Lysdiode (LED) |
| Strømkilde | Battery Powered (3 AA batteries required, not included) or USB |
| Voltage | 4.5 volt |
| Antal lyskilder | 14 |
| Varens vægt | 5.3 ounce |
| Produktdimensioner | 6.69 cm L x 4.72 cm B x 1.57 cm H (emballage) |
Støtte
For any difficulties or questions regarding your BRIKSMAX LED Lighting Kit, please contact our customer support team. We are committed to providing assistance and ensuring your satisfaction.
You can typically find contact information on the product packaging or the official BRIKSMAX webwebsted.
