1. Introduktion
This manual provides detailed instructions for the installation, operation, and maintenance of your LE Solar Outdoor Motion Sensor Light, model WL4000. Please read this manual thoroughly before use to ensure proper function and longevity of the product.
Billede 1.1: Overview of the LE Solar Outdoor Motion Sensor Light WL4000.
2. Produktfunktioner
- Bred belysningsvinkel: Features 3 adjustable heads providing 270° wide lighting coverage.
- Høj lysstyrke: Delivers 1000 lumens of 6500K daylight illumination.
- Effektiv solopladning: Converts sunlight into electricity, charging during the day for night operation.
- PIR Motion Sensor: Detects motion within 16-26 feet and a 120° angle, automatically turning the light on.
- Automatisk drift: Stays off during the day, charges in sunlight, and turns on for 20 seconds when motion is detected at night.
- Holdbar og vejrbestandig: IP65 waterproof rating ensures resistance to water, heat, and frost for reliable outdoor performance.
- Nem installation: Wireless design requires no household electrical circuit, simplifying mounting with included hardware.
Image 2.1: Product dimensions and adjustable light heads.
Image 2.2: The 270-degree wide lighting angle.
Image 2.3: Motion sensor detection range and angle.
3. Pakkens indhold
- LE Solar Outdoor Motion Sensor Light (WL4000)
- Monteringsudstyr (skruer og vægankre)
- Brugermanual
4. Opsætning og installation
Follow these steps for proper installation of your solar light:
- Vælg en placering: Select an outdoor location that receives direct sunlight for at least 8 hours a day to ensure optimal charging. The recommended installation height is 1.5-3.5 meters (5-12 feet).
- Installer Lamp Holder: Use the included screws and wall anchors to securely fix the lamp holder to the desired exterior wall.
- Aktiver lyset: Locate the power switch on the back of the light unit. Press the button to turn the light ON.
- Hæng lyset op: Carefully hang the solar light unit onto the installed lamp holder.
- Juster lyshoveder: Adjust the three light heads and the solar panel to your preferred angles for optimal lighting coverage and sun exposure.
Image 4.1: Step-by-step installation process.
Image 4.2: Fixing the lamp holder med skruer.
Image 4.3: Activating the light using the mode switch.
Image 4.4: Hanging the light onto the lamp holder.
5. Betjeningsvejledning
The LE Solar Outdoor Motion Sensor Light operates automatically based on ambient light and motion detection.
- Dagsdrift: The light will remain off during the day and the solar panel will charge the internal battery using sunlight. Ensure the solar panel is clean and exposed to direct sunlight for optimal charging.
- Natdrift: Once it gets dark, the motion sensor becomes active. When motion is detected within its 16-26 ft range and 120° angle, the light will automatically turn on at full brightness.
- Automatisk slukning: The light will automatically turn off approximately 20 seconds after no further motion is detected.
Image 5.1: Solar charging and motion-activated lighting cycle.
6. Vedligeholdelse
To ensure optimal performance and extend the lifespan of your solar light, follow these maintenance guidelines:
- Rengør solpanelet: Tør solpanelet regelmæssigt af med en blød, tør klud.amp cloth to remove dust, dirt, and debris. A clean panel ensures efficient sunlight absorption and charging.
- Ryd forhindringer: Ensure no trees, bushes, or other objects are blocking direct sunlight from reaching the solar panel, especially during peak sunlight hours.
- Undersøg for skader: Periodically check the light for any physical damage, loose connections, or signs of wear.
- Vejrbestandighed: The light is designed with IP65 waterproofing, making it resistant to rain, heat, and frost. However, extreme weather conditions may temporarily affect performance.
Image 6.1: IP65 waterproof, heat, and frost resistance features.
7. Fejlfinding
If your solar light is not functioning as expected, consider the following common issues and solutions:
- Lyset tændes ikke om natten:
- Sørg for, at afbryderen er i positionen ON.
- Verify the solar panel is receiving sufficient direct sunlight (at least 8 hours) during the day. Relocate if necessary.
- Check if the solar panel is dirty or obstructed. Clean it thoroughly.
- Confirm it is dark enough for the light to activate. The light has a built-in photocell sensor.
- Light stays on for a short period or is dim:
- Insufficient charging due to cloudy weather, shade, or a dirty solar panel. Allow for more charging time or clean the panel.
- The battery may not be fully charged. Ensure optimal sun exposure.
- Motion sensor is not detecting:
- Sørg for, at sensoren ikke er blokeret.
- Verify the light is installed within the recommended height range (1.5-3.5 meters).
- Test the sensor by walking within its detection range.
8. Specifikationer
| Specifikation | Detalje |
|---|---|
| Mærke | Lepro |
| Modelnavn | WL4000 |
| Varenummer | 640003-DW |
| Lyskildetype | LED |
| Lysstyrke | 1000 lumen |
| Farvetemperatur | 6500K dagslys hvid |
| Number of Light Heads | 3 |
| Belysningsvinkel | 270° |
| Afstand til registrering af bevægelsessensor | 16-26 fod (5-8 m) |
| Bevægelsessensordetekteringsvinkel | 120° |
| Vandmodstandsniveau | IP65 vandtæt |
| Strømkilde | Solcelledrevet |
| Batteri | 1 lithium-ion batteri (medfølger) |
| Materiale | ABS+GPPS |
| Produktdimensioner | 11.1 cm L x 4.65 cm B x 5.87 cm H |
| Varens vægt | 14.8 ounce |
9. Garanti og support
For warranty information or technical support, please contact Lepro Customer Service. Details regarding your product's warranty period can be found with your purchase documentation or by contacting the seller directly. Please retain your proof of purchase for any warranty claims.
