Vigtige sikkerhedsoplysninger
Read all instructions thoroughly before operating the Edlund EDV-12C Compact Electric Slicer. Failure to follow these safety guidelines may result in serious injury or damage to the equipment.
- Elektrisk sikkerhed: Ensure the slicer is connected to a properly grounded electrical outlet with the correct voltage (115V/60Hz/1-ph). Do not operate with wet hands or in wet environments. Disconnect power before cleaning or servicing.
- Blade Hazard: The blade is extremely sharp. Always exercise extreme caution when handling, cleaning, or sharpening the blade. Never touch the blade directly. Use the provided blade removal tool for safe handling.
- Personligt beskyttelsesudstyr (PPE): Wear cut-resistant gloves when cleaning or handling the blade. Safety glasses are recommended.
- Operation: Never operate the slicer without all guards and safety features in place. Keep hands and loose clothing away from moving parts. Use the food pusher rod to feed product.
- Stabilitet: Place the slicer on a stable, level, and non-slip surface.
- Rensning: Always unplug the slicer before cleaning. Follow cleaning instructions carefully to prevent injury and maintain hygiene.
- Opretholdelse: Kun kvalificeret personale bør udføre vedligeholdelse eller reparationer.
Produkt overview
The Edlund EDV-12C Compact Electric Slicer is a robust commercial-grade machine designed for efficient and precise slicing of various meats. Its durable construction and safety features make it suitable for demanding kitchen environments.
The Edlund EDV-12C Compact Electric Slicer is a commercial-grade meat slicer featuring a 12-inch carbon steel blade, belt-driven gravity feed, and constructed from anodized aluminum and stainless steel. It is designed for efficient and precise slicing of various meats, as shown here with a roast being sliced and finished slices on a scale.
Nøglefunktioner:
- 12-inch Diameter Forged, Hardened, Carbon Steel Blade
- Belt-Driven Gravity Feed System
- Anodized Cast Aluminum & Stainless Steel Construction
- Removable Carriage for easy cleaning
- Safety Interlock System and Blade Guard Safety Micro Switch
- Built-in Dual Stone Sharpener
- Adjustable Slice Deflector
- Dual Ergonomic Handles
- Tritan Clear Hand Guard
Opsætning
- Udpakning: Carefully remove the slicer from its packaging. Retain packaging for future transport or storage. Inspect the unit for any shipping damage.
- Placering: Position the slicer on a sturdy, level, and non-slip countertop or table. Ensure there is adequate space around the unit for safe operation and ventilation.
- Indledende rengøring: Before first use, thoroughly clean all parts that will come into contact with food. Refer to the "Cleaning and Maintenance" section for detailed instructions.
- Strømtilslutning: Ensure the power switch is in the "OFF" position. Plug the slicer into a dedicated 115V/60Hz/1-ph grounded electrical outlet.
- Saml komponenter: Ensure the removable carriage, food pusher, and blade guard are correctly installed and secured according to the manufacturer's guidelines.
Betjeningsvejledning
Always prioritize safety during operation. Wear appropriate PPE.
- Forbered produkt: Ensure the meat or food item is properly chilled and trimmed to fit the carriage. Remove any bones or foreign objects.
- Juster skivetykkelse: Use the thickness adjustment knob (typically located on the side) to set the desired slice thickness. Turn clockwise for thicker slices and counter-clockwise for thinner slices.
- Load Product: Place the food item securely onto the product carriage. Use the food pusher rod to hold the product firmly against the product plate and the blade. Ensure your hands are clear of the blade path.
- Tænd: Turn the main power switch to the "ON" position. The blue indicator light should illuminate.
- Begynd at skære: Using the ergonomic handles, gently push the product carriage back and forth, guiding the food item across the rotating blade. Apply steady, even pressure with the food pusher.
- Saml skiver: Sliced product will fall onto the receiving tray or surface.
- Sluk: Once slicing is complete, turn the main power switch to the "OFF" position. Wait for the blade to come to a complete stop before removing any remaining product or cleaning.
Rengøring og vedligeholdelse
Regular cleaning and maintenance are essential for the longevity, hygiene, and safe operation of your slicer.
Daglig rengøring:
- Afbryd strømmen: ALWAYS unplug the slicer from the power outlet before cleaning.
- Fjern komponenter: Carefully remove the product carriage, food pusher, and slice deflector. These parts can be washed with warm, soapy water and sanitized.
- Rengøring af knive: With extreme caution and wearing cut-resistant gloves, use a damp cloth with mild detergent to wipe down both sides of the blade. Never submerge the main unit. Use a brush to clean behind the blade guard.
- Tør enhed af: Wipe all exterior surfaces of the slicer with a damp cloth and mild detergent. Pay attention to crevices where food particles might accumulate.
- Rinse and Sanitize: Rinse all cleaned parts with clean water and apply a food-grade sanitizer according to its instructions.
- Tør grundigt: Allow all components to air dry completely or dry with a clean, lint-free cloth before reassembling.
Slibning af knive:
The EDV-12C features a built-in dual stone sharpener. Sharpen the blade regularly to maintain optimal slicing performance.
- Sørg for sikkerhed: Unplug the slicer. Ensure the blade is clean.
- Engage Sharpener: Follow the specific instructions in your detailed manual for engaging the built-in sharpener. This typically involves positioning the sharpener assembly against the blade.
- Skærpe: Briefly turn the slicer ON for a few seconds (refer to specific manual for exact timing) to allow the blade to pass through the sharpening stones. Repeat as necessary.
- Afgratning: Use the deburring stone (if separate) to remove any burrs from the blade edge.
- Ren klinge: After sharpening, thoroughly clean the blade to remove any metal particles.
Periodisk vedligeholdelse:
- Undersøg netledningen for skader.
- Kontroller for løse skruer eller komponenter.
- Lubricate moving parts as recommended by the manufacturer (refer to detailed manual).
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Udskæringsmaskinen tænder ikke. | No power, power switch off, safety interlock not engaged, safety overload switch tripped. | Check power cord connection and outlet. Ensure power switch is ON. Verify all components (carriage, blade guard) are correctly installed. Reset safety overload switch if tripped. |
| Uneven or ragged slices. | Dull blade, product not held firmly, incorrect thickness setting, product too warm. | Sharpen the blade. Ensure product is held firmly against the product plate and pusher. Adjust thickness setting. Ensure product is properly chilled. |
| Motoren lyder anstrengt eller sænker farten. | Overloaded, dull blade, internal issue. | Do not overload the slicer. Sharpen the blade. If problem persists, discontinue use and contact qualified service personnel. |
| Skæreren vibrerer for meget. | Unstable surface, loose components, worn parts. | Ensure slicer is on a stable, level surface. Check for and tighten any loose components. If vibration continues, contact service. |
For issues not listed here or if troubleshooting steps do not resolve the problem, contact Edlund customer support or a qualified service technician.
Specifikationer
- Model: EDV-12C
- Dimensioner (L x B x H): Approximately 22.7" x 23.2" x 18.8" (22-7/10"L x 23-1/5"W x 18-4/5"H)
- Vægt: 48 pund
- Bladets diameter: 12 tommer
- Bladmateriale: Forged, Hardened, Carbon Steel
- Konstruktionsmateriale: Anodized Cast Aluminum & Stainless Steel
- Magt: 115V / 60Hz / 1-Phase
- Motor: 1 / 3 HP
- Driftstilstand: Manual (Gravity Feed)
- Sikkerhedsfunktioner: Safety Interlock System, Blade Guard Safety Micro Switch, Safety Overload Switch, Tritan Clear Hand Guard
- Inkluderet tilbehør: Værktøj til fjernelse af knive
- Certificeringer: ETL Sanitation, cULus, UL EPH Classified
Garanti og support
For warranty information, technical support, or service inquiries regarding your Edlund EDV-12C Compact Electric Slicer, please contact Edlund customer service directly. Keep your purchase receipt and model number readily available when contacting support.
Refer to the official Edlund website or the documentation included with your purchase for the most current warranty terms and contact information.
