LTS CMIP3342W-28MA 4MP IP-tårndomekamera brugermanual

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your LTS CMIP3342W-28MA 4MP IP Turret Dome Camera. Please read this manual thoroughly before using the product to ensure correct usage and to prevent damage or injury. Keep this manual for future reference.

2. Sikkerhedsoplysninger

• Ensure the power supply meets the camera's requirements. Incorrect voltage kan forårsage skade.
• Udsæt ikke kameraet for ekstreme temperaturer, fugtighed eller ætsende miljøer.
• Avoid pointing the camera lens directly at strong light sources for extended periods, as this may damage the image sensor.
• Håndter kameraet forsigtigt. Tab det ikke, og udsæt det ikke for kraftige vibrationer.
• Al installation og service skal udføres af kvalificeret personale.

3. Pakkens indhold

Bekræft, at alle nedenstående varer er inkluderet i din pakke. Hvis der mangler eller er beskadigede varer, skal du straks kontakte din leverandør.

• LTS CMIP3342W-28MA IP Turret Dome Camera
• Monteringsskruer og vægdyvler
• Bor skabelon
• Hexnøgle
• Vandtæt stiksæt
• Hurtig startvejledning (dette dokument)

Billede 3.1: The LTS CMIP3342W-28MA IP Turret Dome Camera shown with its included accessories, including mounting hardware and a drill template for installation.

4. Produktet er slutview

The LTS CMIP3342W-28MA is a 4MP IP Turret Dome Camera designed for reliable surveillance. It features a 2.8mm fixed lens, built-in microphone, Wide Dynamic Range (WDR), and 100ft (30m) IR night vision.

Billede 4.1: Front view of the LTS CMIP3342W-28MA camera, highlighting the lens and IR illuminators.

Billede 4.2: Side view of the camera, illustrating the turret design which allows for flexible angle adjustment after mounting.

5. Opsætning og installation

5.1 Monteringssted

Choose a suitable mounting location that provides the desired field of view and is within range of your network infrastructure. Ensure the surface is strong enough to support the camera's weight.

5.2 Monteringstrin

1. Affix the provided drill template to the desired mounting surface.
2. Drill holes according to the template for mounting screws and cable routing.
3. Insert wall plugs into the drilled holes if mounting on masonry.
4. Route the network cable through the designated hole.
5. Fastgør kamerabasen til monteringsfladen med de medfølgende skruer.
6. Juster kameraets vinkel efter behov.

5.3 Ledningsføring og tilslutning

This camera utilizes Power over Ethernet (PoE) for both power and data transmission. Connect a standard Ethernet cable from your PoE-enabled switch or NVR to the camera's network port. The camera is not compatible with DC power or BNC video connections.

Billede 5.1: Illustration of compatible network cable (PoE) for the camera, contrasting with incompatible DC power and BNC video connections.

6. Betjeningsvejledning

6.1 Indledende konfiguration

Upon first power-up, the camera will obtain an IP address via DHCP if available. You can use a manufacturer-provided IP search tool to discover the camera's IP address on your network. Access the camera's web grænseflade ved at indtaste dens IP-adresse i en web browser.

6.2 Web Interface adgang

Enter the default username and password (refer to your Quick Start Guide or manufacturer's documentation for default credentials). It is highly recommended to change the default password immediately for security purposes.

6.3 Nøglefunktioner

• 4MP opløsning: Provides high-definition video for clear image capture.
• 2.8 mm fast objektiv: Tilbyder et bredt felt af view, suitable for general surveillance.
• Indbygget mikrofon: Enables audio recording alongside video.
• WDR (bredt dynamisk område): Improves image quality in scenes with both very bright and very dark areas.
• IR nattesyn: Infrared illuminators provide clear video up to 100ft (30m) in low-light or no-light conditions.
• Bevægelsesdetektion: Configure motion detection zones and sensitivity for event-triggered recording or alerts.

7. Vedligeholdelse

7.1 Rengøring

Regularly clean the camera lens and housing with a soft, dry cloth. For stubborn dirt, use a mild detergent solution applied to the cloth, then wipe dry. Do not use harsh chemicals or abrasive cleaners.

7.2 firmwareopdateringer

Kontroller jævnligt producentens webwebsted for firmwareopdateringer. Firmwareopdateringer kan forbedre ydeevnen, tilføje nye funktioner og forbedre sikkerheden. Følg de medfølgende instruktioner omhyggeligt, når du udfører opdateringer.

8. Fejlfinding

• Ingen strøm: Ensure the Ethernet cable is securely connected and your PoE source is active and functioning correctly.
• Ingen video: Verify network connectivity. Check the camera's IP address and ensure it's accessible on the network. Confirm that the NVR or viewing software is configured correctly.
• Dårlig billedkvalitet: Clean the lens. Check for obstructions. Adjust camera settings such as exposure, brightness, and WDR in the web interface.
• Nattesyn virker ikke: Ensure IR illuminators are not obstructed. Check night vision settings in the camera's web interface.
• Kan ikke få adgang Web Interface: Verify the camera's IP address. Ensure your computer is on the same network segment. Try pinging the camera's IP address.

9. Specifikationer

10. Garanti og support

For warranty information and technical support, please refer to the official LTS webwebstedet eller kontakt din autoriserede forhandler. Gem din købskvittering som købsbevis i tilfælde af garantikrav.