Indledning
This manual provides essential instructions for the assembly, setup, operation, and maintenance of your MINELAB Vanquish 340 Multi-Frequency Metal Detector. The Vanquish 340 is designed for ease of use, featuring Multi-IQ technology for effective detection across various terrains and target types.
Pakkens indhold
Your Minelab Vanquish 340 package includes the following items:
- Minelab Vanquish 340 Metal Detector unit
- V10 10"x7" Double-D Waterproof Coil
- Armrest with strap
- Akselsamling
- 4 AA batterier
Image: All components of the Minelab Vanquish 340 Metal Detector, including the control unit, search coil, and batteries, laid out on a surface.
Forsamling
Følg disse trin for at samle din metaldetektor:
- Attach the V10 search coil to the lower shaft using the provided bolt and nut. Ensure the coil cable is securely wrapped around the shaft.
- Connect the lower shaft to the middle shaft, and then the middle shaft to the upper shaft (control box assembly). Secure all connections.
- Adjust the shaft length to a comfortable position, ensuring the armrest supports your forearm.
- Secure the control box to the upper shaft.
- Plug the search coil cable into the connector on the control box.
Image: A fully assembled Minelab Vanquish 340 Metal Detector, showing the search coil, shaft, and control unit.
Indledende opsætning
Installation af batteri
- Open the battery compartment located on the control box.
- Indsæt 4 AA-batterier, og sørg for korrekt polaritet.
- Luk batterirummet forsvarligt.
Tænd/sluk
Press the Power button (usually marked with a power symbol) on the control box to turn the detector on or off. The detector will perform a self-calibration upon startup.
Video: Official MINELAB guide on getting started with a metal detector, demonstrating power-on and initial calibration steps.
Driftstilstande
The Vanquish 340 features three pre-set search modes and an All-Metal mode, optimized for different detecting environments and target preferences.
- Park -tilstand: Ideal for high-trash recreation areas like parks. This mode offers good target separation.
- Felttilstand: Best for finding fine coins and artifacts in open fields.
- Strandtilstand: Specifically designed for wet sand and saltwater conditions, where other detectors may struggle.
- All-Metal-tilstand: Detects all types of metal without discrimination. Use this mode to ensure no targets are missed.
To select a mode, press the "Search Mode" button on the control box.
Image: Close-up of the Minelab Vanquish 340 control panel, showing the display and various control buttons for mode selection and settings.
Følsomhedsjustering
Adjusting the sensitivity controls how responsive your detector is to targets and ground mineralization.
- Press the Sensitivity button (often marked with +/- or a wave symbol).
- Use the Up/Down arrow buttons to increase or decrease the sensitivity level.
- Start with a moderate sensitivity and increase it until you hear stable operation without excessive false signals.
Video: Official MINELAB guide on getting started with a metal detector, demonstrating sensitivity adjustment.
Find ud af
The pinpoint function helps you accurately locate the exact position of a detected target before digging.
- Once a target is detected, center the search coil over the target.
- Press and hold the Pinpoint button (P-P).
- Slowly move the coil in a cross-pattern over the target. The loudest and most stable audio signal indicates the center of the target.
Video: Official MINELAB video demonstrating the pinpointing feature of the Vanquish metal detector.
Lydkontrol
The Vanquish 340 offers automatic noise canceling and adjustable volume settings for a clear audio experience.
- Bind: Use the Volume buttons (+/-) to adjust the audio output level to your preference.
- Støjreduktion: The detector automatically cancels noise to provide a stable signal.
Image: The Minelab Vanquish 340 Metal Detector, highlighting the control panel where audio settings can be adjusted.
Vedligeholdelse og pleje
- Always clean your detector after use, especially the search coil if used in wet or sandy conditions.
- Wipe down the control box with a damp klæde; undgå skrappe kemikalier.
- Store the detector in a dry, cool place.
- Fjern batterierne, hvis de opbevares i længere perioder, for at forhindre lækage.
- Inspect cables and connections regularly for wear or damage.
Fejlfinding
False Signals
- Reducer følsomheden.
- Perform a noise cancel (if available, or simply move to a different spot).
- Check for electromagnetic interference from power lines or other electronic devices.
No Signal/Weak Signal
- Sørg for, at batterierne er friske og korrekt installeret.
- Kontroller alle kabelforbindelser.
- Øg følsomheden.
- Verify the search coil is properly attached and functioning.
Tekniske specifikationer
| Feature | Detalje |
|---|---|
| Mærke | MINELAB |
| Model | Vanquish 340 (3820-0001) |
| Teknologi | Multi-IQ Simultaneous Multi-Frequency |
| Søgefunktioner | Park, Field, Beach, All-Metal |
| Søg spole | V10 10"x7" Double-D Waterproof Coil |
| Driftsfrekvens | 10 KHz (Multi-IQ) |
| Strømkilde | 4 AA batterier (medfølger) |
| Varens vægt | 2.6 pund (1.2 kg) |
| Produktdimensioner | 57 x 10.6 x 5.3 inches (Adjustable Length) |
| International Protection Rating | IP54 |
Garanti og support
The Minelab Vanquish 340 comes with a 3-year transferable warranty. For detailed warranty terms, technical support, or service inquiries, please refer to the official MINELAB webwebsted eller kontakt deres kundeservice.
Visit the MINELAB Store on Amazon for yderligere produkter og information.
