Indledning
This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your Mophorn Wood Lathe. Please read this manual thoroughly before operating the machine to ensure proper usage and to prevent injury or damage.
Sikkerhedsinstruktioner
ADVARSEL: Følg altid grundlæggende sikkerhedsforanstaltninger for at mindske risikoen for brand, elektrisk stød og personskade.
- Read and understand all instructions before operating the lathe.
- Wear appropriate personal protective equipment (PPE), including safety glasses, hearing protection, and a dust mask.
- Sørg for, at arbejdsområdet er rent, godt oplyst og fri for forhindringer.
- Hold børn og tilskuere væk fra maskinen, der er i drift.
- Brug ikke maskinen i damp eller våde steder.
- Always disconnect power before making adjustments, changing accessories, or performing maintenance.
- Securely fasten the workpiece before turning.
- Never wear loose clothing, gloves, or jewelry that could get caught in moving parts.
- Brug kun anbefalet tilbehør og tilbehør.
- Maintain the machine in good working condition. Inspect for damaged parts before each use.
Produkt overview
The Mophorn Wood Lathe is designed for high-speed sanding and polishing of various wooden items. It features a robust motor and adjustable speed settings for versatile applications.
Figure 1: Mophorn Wood Lathe with various accessories including chisels and wrenches.
Nøglefunktioner:
- 400W motor: Provides smooth startup and powerful operation with low noise.
- Justerbare hastighedsindstillinger: Four speed settings (1100, 1600, 2300, 3400 RPM) for various turning needs.
- Large Working Capacity: 1000mm (40 inches) distance between centers, and 350mm (14 inches) swing over bed.
- Solid stålkonstruktion: Ensures durability, strength, stability, and reduced vibration.
- Humaniseret design: Features a removable tailstock and 360° rotating tool post for flexibility.
Opsætning
Udpakning og inspektion:
Carefully remove all components from the packaging. Inspect for any damage that may have occurred during shipping. Report any damage immediately to your supplier.
Forsamling:
- Montering af drejebænken: Securely mount the lathe to a sturdy workbench using appropriate bolts and washers. Ensure the workbench can support the weight and vibrations of the lathe during operation.
- Attaching the Tool Rest: Insert the tool rest into its designated slot and tighten the locking mechanism. Adjust its height and position as needed for your workpiece.
- Installing the Tailstock: Slide the tailstock onto the bedways and lock it in place. The tailstock is removable for convenience.
- Strømtilslutning: Connect the power cord to a suitable 220V power outlet. Ensure the power switch is in the "OFF" position before plugging in.
Figure 2: Humanized design features including removable tailstock and 360° rotating tool post.
Betjeningsvejledning
Preparing the Workpiece:
Ensure your wooden workpiece is properly prepared and balanced before mounting. Mark the center points on both ends of the workpiece.
Mounting the Workpiece:
- Insert the drive center into the headstock spindle.
- Place one end of the workpiece onto the drive center.
- Bring the tailstock forward until the live center engages with the other end of the workpiece.
- Tighten the tailstock quill to secure the workpiece firmly between the centers. Ensure it is snug but not overtightened.
Justering af hastighed:
The lathe offers four speed settings (1100, 1600, 2300, 3400 RPM) which are adjusted manually by changing the belt position on the pulleys. Always ensure the power is OFF before adjusting the speed.
- Trin 1: Åbn remdækslet på hovedstokken.
- Trin 2: Loosen the screws that secure the motor.
- Trin 3: Raise the motor pulley to loosen the belt tension.
- Trin 4: Move the belt to the desired pulley combination for the target RPM. Refer to the diagram for pulley positions corresponding to each speed.
- Trin 5: Lower the motor pulley to tension the belt, then tighten the motor screws and close the cover.
Figure 3: Steps for adjusting the lathe speed by changing belt position.
Turning Operation:
- Ensure the workpiece is securely mounted and the tool rest is positioned correctly, close to the workpiece but not touching it.
- Turn on the power switch. Allow the lathe to reach full speed before beginning to cut.
- Using appropriate turning chisels (e.g., skew chisel, gouge, scraper), gently bring the tool into contact with the rotating workpiece.
- Apply steady, controlled pressure, moving the tool smoothly along the tool rest to shape the wood.
- Periodically check the workpiece for concentricity and desired shape.
- When finished, turn off the lathe and wait for the workpiece to stop completely before removing it.
Opretholdelse
Regelmæssig rengøring:
After each use, clean the lathe thoroughly to remove wood dust and chips. Use a brush or vacuum cleaner. Do not use compressed air as it can force dust into bearings.
Smøring:
Periodically apply a light machine oil to the bedways and other moving parts to ensure smooth operation and prevent rust.
Bælteinspektion:
Regularly inspect the drive belt for wear, cracks, or stretching. Replace the belt if any damage is observed to maintain optimal performance and prevent slippage.
Slibning af værktøj:
Keep your turning chisels sharp. Dull tools can cause excessive vibration, poor cuts, and increased risk of kickback.
Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Drejebænken starter ikke | No power supply; Power switch off; Motor overload protection tripped | Check power connection; Turn on power switch; Reset overload protector (if applicable) |
| Overdreven vibration under drift | Workpiece unbalanced; Workpiece not securely mounted; Loose components; Worn belt | Rebalance workpiece; Re-secure workpiece; Tighten all fasteners; Inspect and replace belt |
| Motor overophedning | Overloading the motor; Insufficient ventilation | Reduce load; Ensure proper airflow around motor; Allow motor to cool down |
| Difficulty changing speeds | Belt too tight; Pulleys dirty | Loosen motor mounting screws before adjusting belt; Clean pulleys and belt |
Specifikationer
| Feature | Specifikation |
|---|---|
| Modelnummer | mini Drechselbank 1100-3400 U/min |
| Motorkraft | 400 W |
| Voltage | 220 V |
| Spindelhastigheder | 1100, 1600, 2300, 3400 RPM (4 adjustable speeds) |
| Swing Over Bed (Max. Diameter) | 350 mm (14 tommer) |
| Distance Between Centers (Max. Length) | 1000 mm (40 tommer) |
| Værktøjets hvilelængde | 150 mm |
| Diameter på frontpladen | 140 mm |
| Produktmål (L x B x H) | 93.98 x 42.93 x 27.94 cm (37 x 16.9 x 11 tommer) |
| Produktets vægt | 24.04 kg (53.0 lbs) |
Figure 4: Product dimensions of the Mophorn Wood Lathe.
Garanti og support
Garantioplysninger:
This product comes with a standard manufacturer's warranty. Please refer to your purchase documentation or contact the seller for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.
Kundesupport:
For technical assistance, spare parts, or any questions regarding your Mophorn Wood Lathe, please contact Mophorn customer support or the retailer from whom you purchased the product. Provide your model number and purchase date when contacting support.
Sælger: MR DISTRI BE
Amazon Product Link: Mophorn Wood Lathe on Amazon.com.be
