1. Introduktion
Thank you for choosing the HBN Outdoor Wireless Remote Control Outlet. This device provides a simple and convenient way to control your electrical appliances, lights, and decorations from a distance. Designed for both indoor and outdoor use, it features a weatherproof construction and a reliable wireless signal.
2. Sikkerhedsoplysninger
Læs og forstå alle sikkerhedsinstruktioner, før du bruger dette produkt. Manglende overholdelse af disse instruktioner kan resultere i elektrisk stød, brand eller alvorlig personskade.
- For Outdoor Use: Ensure the outlet is plugged into a Ground Fault Circuit Interrupter (GFCI) protected receptacle.
- Montering: When used outdoors, mount the outlet vertically with the receptacles facing downwards, at least 2 feet (0.6 meters) above ground level, to prevent water ingress.
- Belastningskapacitet: Do not exceed the maximum electrical ratings: 125V, 15A/1875W resistive, 10A/1250W tungsten, 1/2HP.
- Vandeksponering: Do not immerse the product in water. Avoid direct water spray onto the outlets.
- Børn: Opbevares utilgængeligt for børn.
- Skade: Do not use if the product or its cord is damaged.
- Demontering: Do not attempt to disassemble or repair the unit. Contact customer support for assistance.
3. Pakkens indhold
- HBN Outdoor Wireless Remote Control Outlet Unit(s) (Quantity may vary based on pack purchased)
- Wireless Remote Control(s)
- 12V 23A Battery (for remote control)
4. Produktet er slutview
The HBN remote control outlet system consists of a receiver unit (the outlet plug) and a transmitter unit (the remote control). The receiver unit features dual 3-prong outlets and a manual ON/OFF button. The remote control allows for convenient operation from up to 100 feet in line-of-sight.
5. Opsætningsvejledning
5.1. Installation af fjernbetjeningsbatteri
- Åbn dækslet til batterirummet på bagsiden af fjernbetjeningen.
- Insert one 12V 23A battery, ensuring the correct polarity (+ and - signs).
- Luk batterirummets dæksel.
5.2. Plugging in the Outlet Unit
- Plug the HBN Outdoor Wireless Remote Control Outlet into a standard 125V electrical receptacle.
- For outdoor use, ensure the receptacle is GFCI protected and the outlet unit is mounted vertically at least 2 feet above ground.
- The outlet is pre-programmed for immediate use.
6. Betjeningsvejledning
6.1. Basic ON/OFF Operation
- Brug af fjernbetjeningen: Press the "ON" button on the remote to turn on connected devices. Press the "OFF" button to turn them off. The remote can control the outlets from up to 100 feet in line-of-sight, even through walls and doors.
- Using the Manual Button: Each outlet unit has a manual power button. Press this button to toggle the power ON or OFF for the connected devices.
6.2. Pairing Receiver to Transmitter
If you need to pair a receiver outlet to a remote control, follow these steps:
- Sæt modtagerens stikkontakt i en stikkontakt.
- Press and hold the ON/OFF button on the receiver outlet for 3 seconds. The LED indicator will start flashing slowly.
- Release the ON/OFF button on the receiver and press either the ON or OFF button on the transmitter (remote control) to pair the transmitter to the receiver.
Video: An official HBN video demonstrating the pairing process for the outdoor remote control outlet. It shows how to press and hold the button on the outlet unit and then use the remote to establish a connection.
6.3. Resetting an Outlet
If you wish to unpair an outlet receiver from the remote, or if your outlets are unresponsive, you can reset them:
- Tag stikkontakten ud af stikkontakten.
- Tryk og hold ON/OFF-knappen på stikkontakten.
- While still holding the button, plug the outlet receiver back into a power socket and wait to see the indicator flash.
- Når indikatoren holder op med at blinke, kan du slippe knappen, og nulstillingsprocessen er nu fuldført.
- You may program the outlet again after resetting.
7. Vedligeholdelse
- Rensning: Disconnect from power before cleaning. Wipe with a soft, damp klæde. Brug ikke skrappe kemikalier eller slibende rengøringsmidler.
- Opbevaring: Opbevares på et køligt, tørt sted, når det ikke er i brug.
- Udskiftning af batteri: Replace the remote control battery when the signal weakens or the remote stops responding.
8. Fejlfinding
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Stikkontakten reagerer ikke på fjernbetjeningen. | Remote battery is dead or weak. | Replace the 12V 23A battery in the remote. |
| Stikkontakt og fjernbetjening er ikke parret. | Follow the "Pairing Receiver to Transmitter" instructions in Section 6.2. | |
| Distance between remote and outlet is too far or obstructed. | Reduce the distance or remove obstructions. The maximum range is 100ft line-of-sight. | |
| Outlet does not power on manually. | No power to the wall receptacle. | Check the circuit breaker or test the wall receptacle with another device. |
| Overbelastning eller kortslutning. | Unplug devices, check for damage, and ensure total wattage ikke overstiger 1875W. |
9. Specifikationer
- Modelnummer: U151R-1-1
- Elektrisk vurdering: 125V, 15A/1875W Resistive, 10A/1250W Tungsten, 1/2HP
- Forbindelse: Radiofrekvens (RF)
- Trådløs rækkevidde: Op til 100 fod (udsynslinje)
- Udsalgssteder: Dual 3-Prong Grounded Outlets
- Ledningslængde: 6 tommer
- Certificeringer: ETL opført
- Dimensioner: Cirka 3.11 x 2.95 x 1.57 cm (hovedenhed)
- Farve: Sort
10. Garanti og support
For warranty information or technical support, please contact HBN customer service. Refer to the product packaging or the official HBN webwebsted for kontaktoplysninger.
Fabrikant: HBN
