Einhell TC-SM 2131/1 Dobbelt geringssav og E-stativ Brugsanvisning

Indledning

This instruction manual provides essential information for the safe and efficient operation, setup, and maintenance of your Einhell TC-SM 2131/1 Dual Miter Saw and its accompanying E-Stand. Please read this manual thoroughly before using the tool to ensure proper handling and to prevent injury or damage.

The Einhell TC-SM 2131/1 Dual Miter Saw is designed for cutting wood, coated panels, and plastics. It allows for precise miter cuts and accurate cross-cuts. The included E-Stand provides a stable and comfortable working height for various applications.

Sikkerhedsinstruktioner

Overhold altid følgende sikkerhedsforanstaltninger for at mindske risikoen for elektrisk stød, brand og alvorlig personskade.

Generelle sikkerhedsadvarsler for elværktøj

• Sikkerhed på arbejdsområdet: Hold arbejdsområdet rent og godt oplyst. Rodede eller mørke områder indbyder til ulykker. Brug ikke elværktøj i eksplosive atmosfærer, f.eks. i nærheden af ​​brandfarlige væsker, gasser eller støv.
• Elektrisk sikkerhed: Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Avoid body contact with earthed or grounded surfaces, such as pipes, radiators, ranges, and refrigerators.
• Personlig sikkerhed: Always wear eye protection. Use hearing protection when operating the saw. Wear a dust mask if operations create dust. Do not overreach. Keep proper footing and balance at all times.
• Brug og pleje af værktøj: Tving ikke elværktøjet. Brug det korrekte elværktøj til din anvendelse. Tag stikket ud af strømkilden, før du foretager justeringer, skifter tilbehør eller opbevarer elværktøj.
• Workpiece Safety: Fastgør altid emnet med clamping device provided. Never hold the workpiece by hand.
• Klingesikkerhed: Ensure the saw blade is sharp and suitable for the material being cut. Never attempt to remove cut-off material while the blade is rotating.
• Støvsugning: Connect dust extraction and collection facilities if provided. Ensure these are connected and properly used.

Produktkomponenter

Familiarize yourself with the main components of your Einhell TC-SM 2131/1 Dual Miter Saw and E-Stand.

Figur 1: Overview of the Einhell TC-SM 2131/1 Dual Miter Saw and the universal E-Stand. This image shows both main components of the product bundle.

Figur 2: Detaljeret view of the Einhell TC-SM 2131/1 Dual Miter Saw, highlighting its compact design and key features such as the saw blade, motor housing, and base plate.

Figur 3: Detaljeret view of the Einhell E-Stand, showing its stable X-braced feet and aluminum mounting rails designed for easy attachment of the miter saw.

Figur 4: Close-up of the saw blade area, illustrating the protective blade guard and the downward cutting motion. This view emphasizes the safety mechanism during operation.

Figur 5: View of the miter angle adjustment scale and the workpiece stop. The arrows indicate the adjustability of the stop for precise positioning of the material.

Figur 6: Close-up of the saw head showing the bevel angle adjustment mechanism. The arrows indicate the tilting capability of the saw head for angled cuts.

Figur 7: Detail of the dust collection port, designed to connect to a dust extraction system or the included dust bag for a cleaner work environment.

Opsætning

1. Udpakning

• Fjern forsigtigt alle komponenter fra emballagen.
• Inspect all parts for any damage that may have occurred during transit. Do not use damaged parts.
• Ensure all items listed in the "What's in the Box" section are present.

2. Assembling the E-Stand

• Assemble the E-Stand according to the separate instructions provided with the stand. The stand features stable X-braced feet for rigidity.
• Ensure all connections are secure and the stand is stable on a flat, level surface.

3. Mounting the Miter Saw to the E-Stand

• Position the Einhell TC-SM 2131/1 Dual Miter Saw onto the aluminum mounting rails of the E-Stand.
• Secure the saw to the stand using appropriate fasteners (not explicitly mentioned if included, assume standard mounting hardware). Ensure the saw is firmly attached to prevent movement during operation.

4. Blade Installation/Check

• The saw comes with a high-quality carbide-tipped saw blade (48 teeth) for powerful and clean cuts.
• Before first use, ensure the blade is correctly installed and securely fastened. Refer to the saw's specific blade changing instructions if removal or replacement is necessary.

5. Justeringer

• Justering af geringsvinkel: Loosen the locking knob for the turntable. Adjust the turntable to the desired miter angle (refer to Figure 5). Tighten the locking knob firmly.
• Affasningsvinkeljustering: Loosen the locking mechanism for the saw head. Tilt the saw head to the desired bevel angle (refer to Figure 6). Secure the locking mechanism.
• Workpiece Supports and Clamp: Extend the workpiece supports on both sides as needed. Use the clamping device to securely fix the workpiece in place. The workpiece stop with adjustable rails (left and right) allows for precise positioning.
• Laservejledning: The integrated, mains-powered laser marks the cutting line, enabling quick and exact positioning of the workpiece. Ensure the laser is visible and aligned with your intended cut line.

Betjeningsvejledning

1. Strømtilslutning

• Sørg for, at tænd/sluk-knappen er i "OFF"-positionen.
• Connect the power cord to a suitable mains outlet (230V).

2. Preparing the Workpiece

• Placer emnet fast mod anslaget og på bordet.
• Secure the workpiece using the provided clamping device. Never attempt to cut a workpiece that is not properly secured.
• Use the integrated laser to align the cutting line precisely with your mark on the workpiece.
• The table insert features a practical scale for reading the workpiece width.

3. At lave et snit

• Hold godt fast i håndtaget.
• Press the ON/OFF switch to start the motor. Allow the blade to reach full speed (4900 RPM) before beginning the cut.
• Slowly lower the saw head into the workpiece (refer to Figure 4). For wider workpieces, utilize the integrated pull function by pulling the saw head towards you, lowering it, and then pushing it through the workpiece.
• Maintain a steady, controlled feed rate. Do not force the saw.
• Once the cut is complete, release the ON/OFF switch and allow the blade to stop completely before raising the saw head.
• Wait for the blade to stop before removing the cut-off material or adjusting the workpiece.

4. Støvopsamling

• The saw is equipped with a dust collection port (refer to Figure 7). Connect a suitable dust extraction system or use the included dust bag to minimize sawdust in the work area.
• Regularly empty the dust bag or dust collector to maintain efficient dust extraction.

Opretholdelse

Regelmæssig vedligeholdelse sikrer din geringsavs lange levetid og sikker drift.

• Rensning: After each use, disconnect the saw from the power supply. Clean the tool, especially the ventilation slots and the blade guard, with a brush or compressed air. Do not use water or solvents.
• Klingepleje: Keep the saw blade clean and sharp. A dull blade can cause kickback and reduce cutting efficiency. Replace worn or damaged blades immediately. Ensure the replacement blade is suitable for the saw and material.
• Bevægelige dele: Periodically check all moving parts for smooth operation. Apply a small amount of lubricant to pivot points if necessary, ensuring no lubricant gets on the blade or cutting surface.
• Transportlås: For safe transport, engage the transport lock mechanism.
• Opbevaring: Store the saw and stand in a dry, secure location, out of reach of children.

Fejlfinding

Tekniske specifikationer

Garanti og support

Einhell products are manufactured with care and undergo strict quality controls. In the unlikely event of a defect, please contact your retailer or the official Einhell customer service for assistance. Keep your proof of purchase for warranty claims.

For further information, spare parts, or technical support, please visit the official Einhell webwebsted eller kontakt deres kundeserviceafdeling.