SONGMICS Ergonomic Office Chair

Indledning

Thank you for choosing the SONGMICS OBN22BK Ergonomic Office Chair. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new chair. Please read these instructions carefully before assembly and retain them for future reference.

Image: The SONGMICS OBN22BK ergonomic office chair, featuring a black mesh backrest and padded seat, with a five-star base and casters.

Sikkerhedsinstruktioner

• Sørg for, at alle dele er til stede og ubeskadigede før montering. Må ikke anvendes, hvis nogen af ​​delene mangler eller er defekte.
• Saml stolen på en blød, ren overflade for at forhindre ridser.
• Udsæt ikke produktet for direkte sollys i længere perioder.
• Avoid contact with sharp or pointed objects to prevent damage to the upholstery and mesh.
• The maximum static load capacity for this chair is 120 kg (264 lbs). Do not exceed this weight limit.
• Kontrollér regelmæssigt alle skruer og forbindelser for at sikre, at de er fastspændte. Efterspænd om nødvendigt.
• Hold børn og kæledyr væk fra samlingsområdet.

Pakkens indhold

Før du begynder monteringen, skal du kontrollere, at alle nedenstående komponenter er inkluderet i din pakke:

• 1 x Kontorstol (afmonterede komponenter)
• 1 x Assembly Kit (screws, tools)
• 1 x brugermanual

Stol Base

Gas Lift cylinder

Hjul

Sædeplademekanisme

Armlæn

Ryglæn

Skruer og værktøj

Monteringsvejledning

Follow these steps carefully to assemble your SONGMICS office chair. It is recommended to have a second person assist with some steps for easier assembly.

1. Fastgør hjul til basen: Insert each caster into the holes at the end of each leg of the five-star base until they click securely into place.

   Image: Illustration showing casters being inserted into the chair base.

2. Indsæt gasløft i basen: Place the gas lift cylinder into the center hole of the assembled five-star base. Ensure it is seated firmly.

   Image: Illustration showing the gas lift cylinder being placed into the center of the chair base.
3. Fastgør sædepladen til sædet: Align the seat plate mechanism with the pre-drilled holes on the underside of the seat cushion. Secure it using the provided screws. Ensure the front of the seat plate faces the front of the seat.

   Image: Illustration showing the seat plate being screwed onto the underside of the seat cushion.

4. Fastgør armlæn til sæde: Secure the armrests to the sides of the seat cushion using the designated screws. Do not overtighten initially.
5. Fastgør ryglæn til sæde/armlæn: Align the backrest with the mounting points on the seat and/or armrests. Secure with the remaining screws. Once all screws are in place, tighten all screws firmly.

   Image: Illustration showing the backrest being attached to the seat and armrest assembly.

6. Placer det samlede sæde på gasliften: Carefully place the assembled seat (with armrests and backrest attached) onto the gas lift cylinder. Press down firmly to ensure it is securely seated.

   Image: Illustration showing the fully assembled top portion of the chair being placed onto the gas lift and base.

Betjeningsvejledning

Your SONGMICS OBN22BK chair features several adjustment options to enhance your comfort and support.

1. Højdejustering

To adjust the chair's height, locate the lever on the right side, underneath the seat. While seated, pull the lever upwards to raise the chair. To lower the chair, remain seated and pull the lever upwards. Release the lever at your desired height.

2. Tilt Mechanism and Tension Adjustment

The chair features a tilt mechanism that allows the seat and backrest to recline synchronously up to 15 degrees. To activate the tilt function, pull the same lever (on the right side, under the seat) outwards. Push the lever inwards to lock the chair in an upright position.

To adjust the tilt tension, rotate the round knob located underneath the front of the seat. Turn clockwise to increase tension (making it harder to recline) and counter-clockwise to decrease tension (making it easier to recline).

Image: Diagram illustrating the height adjustment lever and the tilt tension knob under the seat, along with the chair's recline range (90-105 degrees).

Opretholdelse

• Rensning: Til generel rengøring skal stolen tørres af med en blød klud.amp cloth. For spot cleaning, use a mild soap solution and a clean cloth, then wipe dry. Do not use harsh chemicals or abrasive cleaners.
• Mesh pleje: The breathable mesh backrest can be gently wiped with a damp cloth. Avoid scrubbing or using sharp objects that could damage the mesh.
• Vedligeholdelse af hjul: Periodically check the casters for accumulated dust, hair, or debris. Clean them to ensure smooth movement.
• Skruefasthed: Over time, screws may loosen. Regularly check all assembly screws (every 3-6 months) and retighten them to ensure the chair remains stable and safe.

Fejlfinding

Specifikationer

• Mærke: SONGMICS
• Modelnummer: OBN22BK
• Farve: Sort
• Materiale: Polypropylene Plastic, Foam, Nylon, Steel (as per A+ content)
• Samlede mål (L x B x H): 58 x 60.5 x (96-104) cm (22.8 x 23.8 x (37.8-40.9) inches)
• Seat Height (from floor): 43-51 cm (16.9-20.1 tommer)
• Seat Dimensions (L x W): 49 x 51 cm (19.3 x 20.1 tommer)
• Ryglænets mål (L x H): 51 x 53 cm (20.1 x 20.9 tommer)
• Armlænshøjde (fra sæde): 21 cm (8.3 tommer)
• Armrest Height (from floor): 64-72 cm (25.2-28.3 tommer)
• Produktvægt: 10 kg (22 lbs)
• Maks. statisk belastningskapacitet: 120 kg (264 lbs)

Image: Detailed diagram showing the various dimensions of the SONGMICS OBN22BK office chair.

Garanti og support

For any questions, concerns, or assistance with your SONGMICS OBN22BK office chair, please contact SONGMICS customer support. While specific warranty details are not provided in this manual, standard return policies typically apply for purchases made through authorized retailers.

For more information or to explore other SONGMICS products, please visit the official SONGMICS Butik.