Wet Sounds WS-MC2

Wet Sounds WS-MC2 Marine Media System User Manual

Model: WS-MC2 | Brand: Wet Sounds

1. Introduktion

This manual provides detailed instructions for the installation, operation, and maintenance of your Wet Sounds WS-MC2 Marine Media System. The WS-MC2 is a compact, 3-inch gauge style media system designed for marine environments, featuring a full-color LCD display, Bluetooth connectivity, USB input, and a built-in amplivligere.

Front view of the Wet Sounds WS-MC2 Marine Media System with the Wet Sounds logo on the screen.

Figur 1: Forside view of the WS-MC2 Marine Media System, showing the display and control buttons.

2. Sikkerhedsoplysninger

Please read all safety warnings and instructions carefully before installing and operating the WS-MC2. Failure to follow these instructions may result in injury or damage to the unit or vessel.

  • Ensure all wiring is correctly connected to prevent short circuits and electrical hazards.
  • Disconnect the vessel's battery before beginning installation.
  • Udsæt ikke enheden for ekstreme temperaturer eller direkte sollys i længere perioder.
  • Consult a professional marine electronics installer if you are unsure about any part of the installation process.

3. Pakkens indhold

Bekræft at alle varer er til stede i pakken:

  • Wet Sounds WS-MC2 Marine Media System
  • Monteringshardware
  • Ledningsnet
  • Brugervejledning (dette dokument)

4. Installation

4.1 Montering

The WS-MC2 is designed to fit into a standard 3-inch gauge opening. Ensure there is sufficient depth behind the mounting surface for the unit and its wiring harness.

  1. Choose a suitable mounting location that is protected from direct water exposure and excessive vibration.
  2. Cut a 3-inch (76mm) diameter hole in the mounting surface.
  3. Insert the WS-MC2 into the opening.
  4. Secure the unit using the supplied mounting bracket and hardware.

4.2 Ledningsforbindelser

Refer to the wiring diagram below and the labels on the wiring harness for correct connections. Incorrect wiring can damage the unit or your vessel's electrical system.

Bag view of the Wet Sounds WS-MC2 Marine Media System showing the wiring harness with labeled connectors for power, ground, USB, AUX input, Zone-Z output, Rear Line Out, and Antenna input.

Figur 2: Bagside view of the WS-MC2 with wiring harness connections.

  • Strøm (rød): Tilslut til en 12V DC strømkilde med tænd/sluk-funktion.
  • Jord (sort): Connect to a reliable ground point on the vessel.
  • USB-indgang: Tilslut USB-enheder til medieafspilning eller opladning.
  • AUX-indgang: Connect external audio sources via 3.5mm jack.
  • Zone-Z Out: RCA outputs for Zone Z audio.
  • Rear Line Out: RCA outputs for rear audio channels.
  • Antenneindgang: Connect your marine antenna for radio reception.
  • Højttalerudgange: Connect your marine speakers to the appropriate positive and negative terminals. The unit features a 4x25W RMS internal amplivligere.

5. Betjening

5.1 Grundlæggende kontroller

Vinklet view of the Wet Sounds WS-MC2 Marine Media System screen displaying icons for Bluetooth, USB, and radio/aux input, along with control buttons.

Figure 3: WS-MC2 display and control layout.

  • Tænd/sluk-knap: Press and hold to power on/off. Press briefly to mute/unmute audio.
  • SETUP knap: Access system settings and preferences.
  • MENU knap: Naviger gennem menuer og muligheder.
  • SRC (Kilde)-knap: Cycle through available audio sources (Bluetooth, USB, AUX, AM/FM Radio).
  • BAND-knap: In radio mode, switch between AM/FM bands.
  • Afspil/pause knap: Afspil eller sæt det aktuelle nummer på pause.
  • Spring frem/tilbage-knapper: Skip tracks or tune radio stations.
  • Drejeknap: Adjust volume, navigate menus, and confirm selections.
  • ZONE 2 +/- Buttons: Adjust volume for Zone 2 output.

5.2 Kildevalg

Tryk på SRC button repeatedly to cycle through the available audio sources: Bluetooth, USB, AUX, and AM/FM Radio.

5.3 Bluetooth-betjening

  1. Select Bluetooth as the source using the SRC knap.
  2. On your mobile device, search for Bluetooth devices and select "WS-MC2".
  3. Once paired, audio from your device will play through the WS-MC2.
  4. Use the Play/Pause and Skip buttons on the WS-MC2 or your device to control playback.

5.4 USB-afspilning

  1. Connect a USB storage device containing audio files to the USB input.
  2. Select USB as the source using the SRC knap.
  3. Enheden vil automatisk begynde at afspille kompatibel lyd files.
  4. Brug knapperne Afspil/Pause og Spring over til at styre afspilningen.

5.5 Lydjusteringer

The WS-MC2 features a 7-band digital equalizer for fine-tuning audio output.

  1. Tryk på OPSÆTNING knappen for at åbne indstillingsmenuen.
  2. Navigate to the "Equalizer" or "Audio Settings" option using the rotary knob.
  3. Adjust the frequency bands to your preference.
  4. Brug ZONE 2 +/- buttons to independently control the volume of the second audio zone.

6. Vedligeholdelse

  • Rensning: Brug en blød, damp cloth to clean the unit's surface. Do not use abrasive cleaners or solvents.
  • Forbindelser: Kontrollér regelmæssigt alle ledningsforbindelser for at sikre, at de er fastgjorte og fri for korrosion.
  • Opbevaring: If storing the vessel for an extended period, ensure the unit is powered off and consider disconnecting the main power supply.

7. Fejlfinding

ProblemMulig årsagLøsning
Ingen strømLoose power connection; Blown fuse; No power from source.Check power and ground connections; Inspect and replace fuse if necessary; Verify 12V power at the source.
Ingen lydudgangVolume too low; Mute engaged; Incorrect source selected; Loose speaker connections.Increase volume; Press MUTE button; Select correct source; Check speaker wiring.
Bluetooth forbinder ikkeUnit not in pairing mode; Device too far; Previous connection interference.Ensure WS-MC2 is in Bluetooth source mode; Move device closer; Forget "WS-MC2" on your device and re-pair.
Dårlig radiomodtagelseAntenna not connected; Poor antenna placement; Interference.Check antenna connection; Reposition antenna; Move away from sources of electrical interference.

8. Specifikationer

FeatureDetalje
ModelWS-MC2
Vise2.7-inch Full-Color TFT LCD
Monteringsstil3-inch Gauge Style
ForbindelseBluetooth, USB, 3.5mm AUX Jack
Amplivligere Output4 x 25W RMS @ 4 Ohm
Equalizer7-Band Digital Equalization
LydudgangstilstandStereo, Surround (4.1 Channel Configuration)
Kompatible enhederSmartphone (iOS), USB Storage Devices
Varens vægt4 pund (ca. 1.8 kg)
Pakkedimensioner17 x 15.25 x 9.75 tommer (ca. 43.2 x 38.7 x 24.8 cm)

9. Garanti og support

The Wet Sounds WS-MC2 Marine Media System comes with a 90 dages begrænset garanti fra købsdatoen. Denne garanti dækker fejl i materialer og udførelse ved normal brug.

For technical support, warranty claims, or service inquiries, please contact Wet Sounds customer service or visit their official webwebsted. Gem din købsbevis for at validere garantien.

Note: This product may be a renewed item. Renewed products are professionally inspected and tested to work and look like new. Refer to your purchase documentation for specific renewed product warranty details.

Relaterede dokumenter - WS-MC2

Preview Wet Sounds WS-MC2 Marine Receiver Brugermanual
Omfattende brugermanual til Wet Sounds WS-MC2 1-dels marinemodtager, med detaljerede oplysninger om funktioner, betjeningselementer, installation og fejlfinding.
Preview Wet Sounds WS-MC-5 Marine Receiver Owner's Manual | Installation, Features, Controls
Comprehensive owner's manual for the Wet Sounds WS-MC-5 marine digital media receiver. Learn about installation, features, controls, setup, and warranty.
Preview Wet Sounds WS-MC-5 V2 Marine Receiver Brugermanual
Omfattende brugermanual til Wet Sounds WS-MC-5 V2 marinemodtageren i ét stykke, med detaljer om installation, funktioner, betjeningselementer, opsætning, kildemuligheder og garantioplysninger.
Preview Wet Sounds højtydende maritime lydprodukter katalog
Udforsk det omfattende udvalg af Wet Sounds højtydende maritimt lydudstyr, herunder højttalere, subwoofere, mediemodtagere, amphøjttalere og soundbars designet til både og motorsportskøretøjer.
Preview Wet Sounds WS-220 BT 4-Zone Bluetooth Controller Owner's Manual
This manual provides information on the Wet Sounds WS-220 BT, a 4-zone Bluetooth level controller for marine audio systems. It covers features, specifications, system setup, and limited warranty.
Preview Wet Sounds MER-MCS Højtydende Marinemodtager Brugermanual
Omfattende brugermanual til Wet Sounds MER-MCS højtydende marinemodtager, der dækker installation, betjening, indstillinger og fejlfinding af marine lydsystemer.