1. Introduktion
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your eldoLED LINEARdrive 180D DMX/RDM Constant Voltage LED Driver. Please read this manual thoroughly before using the product and retain it for future reference.
Figure 1: eldoLED LINEARdrive 180D DMX/RDM LED Driver. Dette billede viser toppen view of the eldoLED LINEARdrive 180D, an intelligent LED driver/controller. Visible markings include 'eldoLED LINEARdrive', 'Intelligent LED Driver/Controller', 'IEC61347', 'EN55015 IEC61003 EN1547', 'VDC in SELV equivalent', 'η: 99% typ', 'Ta: -20°C to +50°C', and 'Tc: +65°C'. The device features a clear plastic casing, a digital display, and three control buttons.
2. Sikkerhedsoplysninger
Overhold altid følgende sikkerhedsforanstaltninger for at forhindre personskade eller beskadigelse af produktet:
- Installationen skal udføres af en kvalificeret elektriker i overensstemmelse med alle lokale og nationale el-forskrifter.
- Disconnect power before installation, maintenance, or any service.
- Brug ikke enheden uden for den angivne volumenstyrke.tage og aktuelle vurderinger.
- Sørg for korrekt jording for at forhindre elektrisk stød.
- Do not expose the device to moisture or extreme temperatures beyond its operating range.
- Denne enhed er designet til indendørs brug, medmindre andet er angivet.
3. Produktet er slutview
The eldoLED LINEARdrive 180D is a high-performance, constant voltage LED driver designed for sophisticated lighting applications. It features DMX/RDM control capabilities and provides four independent LED outputs, making it suitable for dynamic and tunable lighting systems.
Nøglefunktioner:
- Constant Voltage Output: Delivers stable voltage for consistent LED performance.
- 180W udgangseffekt: Capable of driving significant LED loads.
- DMX/RDM Control: Enables advanced digital control and monitoring of lighting fixtures.
- 4 Control Channels: Provides flexibility for multi-channel LED applications.
- Plast Casing: Holdbar og let konstruktion.
4. Opsætning og installation
4.1. Udpakning
Carefully remove the LINEARdrive 180D from its packaging. Inspect the device for any signs of damage. If damage is found, do not proceed with installation and contact your supplier.
4.2. Montering
Mount the driver in a location that allows for adequate ventilation and is free from excessive heat, dust, and moisture. Ensure the mounting surface is stable and can support the weight of the driver.
4.3. Ledningsforbindelser
All wiring should be performed with the main power supply disconnected. Refer to the wiring diagram provided with the product for specific connection details. General connections include:
- AC-indgang: Connect the main power supply to the designated AC input terminals. Ensure correct polarity (Live, Neutral, Ground).
- DC-udgang: Connect your constant voltage LED fixtures to the four DC output channels. Observe correct polarity (+ and -) for each channel.
- DMX/RDM Input/Output: Connect DMX control lines (Data+, Data-, Ground) to the DMX terminals for digital control. Ensure proper termination of the DMX line.
5. Betjeningsvejledning
5.1. Tænd
After all connections are securely made and verified, restore power to the device. The integrated display will illuminate, indicating the device is operational.
5.2. DMX/RDM-styring
The LINEARdrive 180D is controlled via DMX512 and RDM protocols. Use a compatible DMX controller to send commands to the driver. RDM allows for remote monitoring and configuration of the device, such as setting DMX addresses and reading status information.
- DMX-adressering: Set the DMX start address using the onboard controls or via RDM. Each of the four output channels will typically occupy consecutive DMX addresses.
- Kanalkontrol: Send DMX values (0-255) to the assigned addresses to control the intensity or other parameters of the connected LED fixtures.
5.3. Onboard Configuration
The device features a small display and control buttons for basic configuration, such as setting the DMX address or selecting pre-programmed modes. Refer to the detailed programming guide for specific menu navigation and parameter adjustments.
6. Vedligeholdelse
The eldoLED LINEARdrive 180D is designed for reliable operation with minimal maintenance. Follow these guidelines:
- Rensning: Periodically clean the exterior of the device with a soft, dry cloth. Do not use abrasive cleaners or solvents.
- Inspektion: Kontroller regelmæssigt ledningsforbindelserne for tæthed og tegn på slid eller beskadigelse.
- Ventilation: Sørg for, at ventilationsåbningerne ikke er blokerede for at forhindre overophedning.
For any internal servicing, contact qualified personnel only.
7. Fejlfinding
If you encounter issues with your LINEARdrive 180D, consult the following table:
| Problem | Mulig årsag | Løsning |
|---|---|---|
| Ingen strøm til enheden | Loose power connection, tripped breaker, faulty power supply | Check power connections, reset breaker, verify power supply voltage. |
| LED'er lyser ikke | Incorrect wiring, faulty LEDs, DMX signal issue, incorrect DMX address | Verify LED wiring polarity, test LEDs, check DMX signal and address settings. |
| Intermitterende operation | Loose connections, overheating, DMX signal interference | Secure all connections, ensure adequate ventilation, check DMX cabling and termination. |
| DMX control not responding | Incorrect DMX address, DMX cable fault, DMX controller issue | Verify DMX address, check DMX cable continuity, test with a different DMX controller. |
If the problem persists after attempting these solutions, contact eldoLED technical support.
8. Tekniske specifikationer
| Feature | Specifikation |
|---|---|
| Model | LINEARdrive 180D |
| Kontrolkanaler | 4 |
| Kontrolprotokol | DMX/RDM |
| Udgangstype | Constant Voltage (4xLED outputs) |
| Strømudgang | 180W |
| Materiale | Plast |
| Lyskildetype | Light Emitting Diode (for connected fixtures) |
| Driftstemperatur (Ta) | -20°C til +50°C |
| Hustemperatur (Tc) | +65°C (maximum) |
| Effektivitet (η) | 99 % typisk |
| Overholdelse | IEC61347, EN55015, IEC61003, EN61547, SELV equivalent |
| UPC | 715706905589 |
9. Garanti og support
9.1. Garantioplysninger
The eldoLED LINEARdrive 180D is covered by a manufacturer's warranty. Please refer to the warranty documentation provided with your purchase or visit the official eldoLED webwebstedet for detaljerede vilkår og betingelser. Gem din købsbevis til garantikrav.
9.2. Teknisk support
For technical assistance, troubleshooting beyond this manual, or service inquiries, please contact eldoLED customer support through their official webwebstedet eller de kontaktoplysninger, der følger med din produktdokumentation.
