Dynojet POWER VISION PV3 User Manual

Produkt overview

The Dynojet Power Vision PV3 is a performance tuning device designed for specific vehicle models, including the 2019-2020 Honda Talon (does not fit on 4-seater models). This device allows users to flash performance tunes directly via the OEM diagnostic connector, eliminating the need to remove and send out the ECU. It features a high-contrast display for clear visibility in direct sunlight and can display real-time vehicle data channels. The unit is weather-resistant, making it suitable for use in various conditions.

Pakkens indhold

Upon opening the package, verify that all components are present and undamaged. The Dynojet Power Vision PV3 package typically includes the following items:

• Power Vision PV3 Device
• Køretøjstilslutningskabel
• USB-kabel til PC-tilslutning
• Mounting Accessories (e.g., Dual Lock fasteners, alcohol wipe)

Image 1: Components of the Dynojet Power Vision PV3 kit. This includes the main Power Vision device, a vehicle diagnostic cable, a USB cable for computer connection, and adhesive mounting pads with an alcohol wipe for surface preparation.

Billede 2: Endnu en view of the Dynojet Power Vision PV3 kit components, showing the device, vehicle cable, USB cable, and mounting accessories. The alcohol wipe and 3M Dual Lock fasteners are clearly visible.

Opsætningsinstruktioner

1. Klargør køretøjet: Ensure the vehicle's ignition is off and the parking brake is engaged. Locate the OEM diagnostic connector on your Honda Talon. Refer to your vehicle's service manual for the exact location if needed.
2. Connect the Power Vision PV3: Connect the vehicle connection cable to the Power Vision PV3 device. Then, connect the other end of the vehicle connection cable to the OEM diagnostic connector on your vehicle.
3. Tænd: Turn the vehicle's ignition to the ON position (do not start the engine). The Power Vision PV3 device should power on automatically.
4. Indledende enhedsopsætning: Follow the on-screen prompts on the Power Vision PV3 to complete the initial setup. This may include selecting your vehicle model and confirming the ECU type.
5. Install Dynojet Software (PC): For advanced tuning and updates, download and install the Dynojet Power Core software on your computer from the official Dynojet website. Use the provided USB cable to connect the Power Vision PV3 to your computer.
6. Montering af enheden: Choose a suitable, secure location for mounting the Power Vision PV3 within your vehicle's cabin. Clean the mounting surface with the provided alcohol wipe and allow it to dry. Apply the 3M Dual Lock fasteners to the back of the device and the chosen mounting surface, ensuring a firm bond.

Betjeningsvejledning

The Power Vision PV3 offers various functions accessible through its high-contrast display and intuitive button interface.

Flashing Tunes

1. Select Tune: From the main menu, navigate to the "Flash Tune" or "Program ECU" option.
2. Choose Map: Select the desired performance map from the list of available tunes. Ensure the chosen map is compatible with your vehicle's modifications.
3. Confirm Flash: Follow the on-screen instructions to confirm the flashing process. Do not interrupt the power supply or disconnect the device during this process.
4. Færdiggørelse: Once the flash is complete, the device will notify you. You may be prompted to cycle the ignition.

Real-time Data Monitoring

The Power Vision PV3 can display various vehicle data channels in real-time, providing valuable diagnostic and performance information.

• Navigate to the "Monitor" or "Gauges" section on the device.
• Select the parameters you wish to view (e.g., RPM, coolant temperature, throttle position, fuel pressure).
• The display will update in real-time, allowing you to observe vehicle performance characteristics.

Datalogning

The device can record vehicle data for later analysis using the Dynojet Power Core software.

• Access the "Datalog" or "Record" function.
• Start recording data during vehicle operation.
• Stop recording when finished. The data can then be downloaded to a PC via the USB cable for detailed review.

Opretholdelse

The Dynojet Power Vision PV3 is designed for durability and is weather-resistant. Regular maintenance is minimal but important for longevity:

• Rensning: Tør enhedens skærm og kabinet af med en blød kludamp klud. Undgå slibende rengøringsmidler eller opløsningsmidler.
• Kabelinspektion: Periodically inspect the vehicle connection cable and USB cable for any signs of wear, fraying, or damage. Replace damaged cables immediately.
• Softwareopdateringer: Regularly check the official Dynojet website for firmware updates for your Power Vision PV3 and software updates for Power Core. Keeping the device updated ensures optimal performance and access to new features or vehicle compatibility.
• Opbevaring: Når enheden ikke er i brug i længere perioder, skal den opbevares køligt og tørt, væk fra direkte sollys og ekstreme temperaturer.

Fejlfinding

If you encounter issues with your Power Vision PV3, refer to the following common troubleshooting steps:

For persistent issues, contact Dynojet technical support.

Specifikationer

Garantioplysninger

Dynojet products are typically covered by a manufacturer's warranty. For specific warranty terms, conditions, and duration, please refer to the documentation included with your product or visit the official Dynojet website. Warranty claims are generally handled directly by Dynojet.

Support og kontakt

For technical assistance, product inquiries, or support, please contact Dynojet directly. Their official website provides access to support resources, FAQs, and contact information for their customer service and technical support teams.

Officiel Webwebsted: www.dynojet.com

It is recommended to have your product model number (PV3-16-03) and any relevant purchase information ready when contacting support.