OCOM OCPP-88A-URL Thermal Receipt Printer User Manual

1. Introduktion

This user manual provides comprehensive instructions for the installation, operation, maintenance, and troubleshooting of your OCOM OCPP-88A-URL Thermal Receipt Printer. This high-speed 80mm thermal printer is designed for efficient and reliable receipt printing in various environments, including retail and kitchen settings. It features multiple connectivity options and an automatic cutter for convenience.

2. Sikkerhedsoplysninger

• Always use the original power adapter and cable provided with the printer.
• Udsæt ikke printeren for vand, fugt eller ekstreme temperaturer.
• Undgå at placere printeren i direkte sollys eller i nærheden af ​​varmekilder.
• Sørg for tilstrækkelig ventilation omkring printeren for at forhindre overophedning.
• Forsøg ikke selv at skille printeren ad eller reparere den. Kontakt kvalificeret servicepersonale.
• Opbevares utilgængeligt for børn.
• Be cautious when handling the auto-cutter blade.

3. Pakkens indhold

Kontroller venligst indholdet af din pakke for at sikre, at alle varer er til stede og ubeskadigede:

• OCOM OCPP-88A-URL Termisk kvitteringsprinter
• Strømadapter
• Strømkabel
• USB kabel
• Termisk papirrulle (startrulle)

Figure 3.1: OCOM OCPP-88A-URL Thermal Receipt Printer with included power adapter, power cable, USB cable, and a thermal paper roll.

4. Opsætning

4.1 Tilslutning af strøm

1. Tilslut strømkablet til strømadapteren.
2. Plug the power adapter's output connector into the power port on the back of the printer.
3. Sæt strømkablet i en passende stikkontakt.
4. Ensure the power indicator light on the printer illuminates, indicating power is supplied.

4.2 Ilægning af termopapir

1. Press the paper cover open button (usually located on the side or front of the printer) to open the paper compartment.
2. Insert the thermal paper roll with the printing surface facing outwards (the paper should feed from the bottom of the roll).
3. Træk en lille mængde papir ud forbi skæreenheden.
4. Close the paper cover firmly until it clicks into place. Ensure there are no wrinkles in the paper.

4.3 Connecting Interfaces (USB, Serial, Ethernet)

The OCPP-88A-URL printer supports multiple connection types. Choose the appropriate method for your setup:

• USB-forbindelse: Tilslut den ene ende af USB-kablet til printerens USB-port og den anden ende til en ledig USB-port på din computer.
• Seriel forbindelse: Connect the serial cable (not included) to the printer's serial port and to the serial port on your computer or POS system.
• Ethernet-forbindelse: Connect a standard Ethernet cable to the printer's Ethernet port and to your network router or switch. Ensure your network is configured correctly for the printer to obtain an IP address.

4.4 Driverinstallation

Before using the printer, you may need to install the appropriate drivers on your computer or POS system. Drivers are typically available on the OCOM official website or on a driver CD included with the printer (if applicable). Follow the instructions provided with the driver package for installation.

5. Betjening

5.1 Tænd/sluk

• Tænd: Press the power button (usually located on the front or side) until the power indicator light turns on steadily.
• Sluk: Press and hold the power button until the power indicator light turns off.

5.2 Selvtestudskrift

A self-test print can help verify the printer's basic functionality and print quality without requiring a computer connection.

1. Sørg for, at printeren er slukket, og at der er ilagt papir.
2. Press and hold the FEED button (or similar button, refer to printer's specific layout).
3. While holding the FEED button, turn on the printer.
4. Release the FEED button once the self-test print begins. The printer will print its configuration and status.

5.3 Indikatorlys

Printeren har indikatorlamper, der angiver dens status:

• STRØM-LED: Angiver, at printeren er tændt.
• FEJL LED: Illuminates or blinks to indicate an error (e.g., paper out, print head overheating, cutter error). Refer to the troubleshooting section for details.
• PAPER LED: Indicates that the paper roll is low or out.

6. Vedligeholdelse

6.1 Rengøring af printhovedet

Regelmæssig rengøring af printhovedet sikrer optimal udskriftskvalitet og forlænger printerens levetid.

1. Sluk printeren, og frakobl strømkablet.
2. Åbn papirlåget.
3. Wait for the print head to cool down if the printer has been recently used.
4. Gently wipe the thermal print head surface with a cotton swab lightly dampafsluttet med isopropylalkohol.
5. Lad printhovedet tørre helt, før du lukker dækslet og tilslutter strømmen igen.

6.2 Rengøring af pladevalsen

The platen roller helps feed the paper smoothly.

1. Sluk printeren, og frakobl strømkablet.
2. Åbn papirlåget.
3. Rotate the platen roller and wipe its surface with a soft cloth dampafsluttet med isopropylalkohol.
4. Allow it to dry before closing the cover.

7. Fejlfinding

8. Specifikationer

9. Garanti og support

Your OCOM OCPP-88A-URL Thermal Receipt Printer comes with a standard manufacturer's warranty. Please refer to the warranty card included with your product or visit the official OCOM webhjemmeside for detaljerede garantivilkår.

For technical support, service, or inquiries, please contact OCOM customer service through their official website or the contact information provided in your product documentation. When contacting support, please have your printer's model number (OCPP-88A-URL) and serial number ready.